Iron

Home/Iron
  • Out of stock

    Large Iron Fleur de Lis Pull

    Large Iron Fleur de Lis Pull measures 9" tall, 1-5/8" wide, and 1-7/8" deep. The screw holes measure 7-5/8" center to center. They are painted black.

    Large Fleur De Lis Pull

  • Out of stock

    Medium Iron Fleur de Lis Pull

    Medium Iron Fleur de Lis Pull measures 7-1/4" tall, 1-1/2" wide, and 1-1/2" deep. The screw holes measure 5-5/16" center to center. They are painted black.

    Medium Fleur De Lis Pull

  • Out of stock

    Small Iron Fleur de Lis Pull

    Small Iron Fleur de Lis Pull measure 5-1/4" tall, 1-1/4" wide, and 1" deep. The screw holes measure 3-1/2" center to center. They are painted black.

    Small Fleur De Lis Pull

  • Iron Rectangular Bin Pull

    Iron Rectangular Bin Pull measures 3-1/2" wide, 1-1/2" tall, and 3-4" deep. The screw holes measure 2-7/8" center to center. They are painted black.

    9141

  • Iron Ornate Fleur de Lis Bin Pull

    Iron Ornate Fleur de Lis Bin Pull measures 4-1/4" wide, 1-1/2" tall, and 3/4" deep. The screw holes measure 2-3/4" center to center. They are painted black.

    9140

  • Out of stock

    Iron Arched Bin Pull

    Iron Arched Bin Pull measures 4" wide, 1-5/8" tall, and 1/2" deep. They are powder-coated black.

    R Bin Pull

  • Iron Spanish Rose Bin Pull

    Iron Spanish Rose Bin Pull measure 4-1/8" wide, 1-5/8" tall, and 1-1/16" deep. The screw holes measure 3-3/8" center to center. They are painted black.

    9138

  • Oval Iron Bin Pull

    Oval Iron Bin Pull measures 3-3/8" wide, 1-3/8" tall, and 3/4" deep. The screw holes measure 2-7/8" center to center. They are painted black.

    9139

  • Iron Lion Door Knocker

    Iron Lion Door Knocker back plate measures 3-5/8" wide and 4-1/4" tall. The overall height is 5-7/8". The strike plate is 1-3/4" in diameter. The knocker and  strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

    b

  • Iron Bat Door Knocker

    Iron Bat door Knocker measures 2-3/4" wide, 9-1/8" tall and projects 1-5/8" from the surface of your door. It attaches to your door with two wood screws. This knocker is a replica of a knocker from one of Mr. Ricca's properties on the corner of Burgundy and Governor Nicholls streets.

    Iron Bat Door Knocker

  • Out of stock

    8 Inch Iron Foot Bolt

    8 Inch Iron Foot Bolt is most often used on a double door application and secures the stationary door at the bottom, it is highly recommended for use with a head bolt (or top bolt) to prevent warping. The bolt measures 9-1/4″ tall and the rear plate measures 1-7/8″ wide by 5-1/2″ tall. The bolt tongue measures 1-1/16″ when activated, and is 3/4″ wide. The bolt comes with two different keepers, one used when the threshold extends well past the door and can be mortised into, and one used when the threshold does not extend much past the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down with your hand, never forward away from the surface of the door, or operated with your foot (this action would put stress on the weld that attaches the arm to the bolt).

    8 inch iron Foot Bolt

  • Out of stock

    16 Inch Iron Head Bolt

    16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    16 inch iron head bolt

  • 28 Inch Iron Head Bolt

    28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    28 inch iron head bolt

  • Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"

    Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"- sold as a pair of two hinges (one hinge shown in images). These hinges are made of steel and painted gloss black. The pin is removable for ease of hanging. plain Ball top closed

    Plain ball top open

  • Out of stock

    Embossed Ball Top Hinges 4-1/4" x 4-7/8"

    Embossed Ball Top Hinges 4-1/4" x 4-7/8" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge, the spine of the hinge, and on both finials. The pattern of the embossing is in a floral Victorian style.

    four and a half by five openfour and a half by five closed

  • Embossed Ball Top Iron Hinges 4" x 4"

    Embossed Ball Top Iron Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.

    four by four embossed ball top open

    four by four embossed ball top closed

  • Embossed Iron Steeple Top Hinges 4" x 4"

    Embossed Iron Steeple Top Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.four by four embossed steeple 2 closed

    four by four embossed steeple 2 open

  • Embossed Steeple Top Hinges 3-1/2" x 3-1/2"

    Embossed Iron Steeple Top Hinges 3-1/2″ x 3-1/2″ are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge. The pattern of the embossing is in a floral Victorian style. three and a half by three and a half steeple 1 openthree and a half by three and a half steeple 1 closed

  • Iron Parliament Hinge with Five and Three Quarter Inch Offset

    Iron Parliament Hinge with Five and Three Quarter Inch Offset measures a total of 7-7/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1-1/16″ x 2-7/8″ and has a throw of 5-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

    seven and seven eigths inch parlament hinge

  • Iron Parliament Hinge with Four and Three Quarter Inch Offset

    Iron Parliament Hinge with Four and Three Quarter Inch Offset measures a total of 7″ wide and 3-3/8″ tall. It mortises into the door or jamb 1-1/8″ x 3-3/8″ and has a throw of 4-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

    seven inch parlament hinge

  • Iron Parliament Hinge with Four and a Quarter Inch Offset

    Iron Parliament Hinge with Four and a Quarter Inch Offset measures a total of 6-3/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1″ x 2-7/8″ and has a throw of 4-1/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

    six and three eigths parlament hinge

  • Iron Parliament Hinge with Three Inch Offset

    Iron Parliament Hinge with Three Inch Offset measures a total of 5-1/8" wide and 2-7/8" tall. It mortises into the door or jamb 1" x 2-7/8" and has a throw of 3" when open. The pin on the hinge is removable making it function as either a right or left hand swing.

    five and an eigth parlament hinge

  • Iron Beaded Oval Knobs and Plates Set

    Iron Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of iron and powder coated in a matte black finish. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into "dummy knobs" (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-3/8" x 7" at their widest points

    The knobs measure 1-3/4" x 2-3/4" at their widest points and rise 2-3/4" from the surface of the door

    VB1197I

Title

Go to Top