Shop

Home/Shop

Any size, any shape, any style, any color, we may have it in stock and if we don’t we may be able to get it made for you!

Please call us for a price inquiry on anything that you see. Ricca’s Phone# 504 – 488 – 5524

  • # 3 Right Lull and Porter Style Shutter Hinge

    #3 Right Lull & Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 3-1/4"

    Hinge throw from casing - 1-3/8"

    Hinge height at mortise -2-9/16"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    3 right open rear

  • # 0 Left Lull and Porter style Shutter Hinge

    # 0 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 6-7/16"

    Hinge throw from casing - 4-1/8"

    Hinge Height at mortise- 3-1/2"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

    0 left open rear

  • # 0 Right Lull and Porter style Shutter Hinge

    # 0 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 6-7/16"

    Hinge throw from casing - 4-1/8"

    Hinge Height at mortise-3-1/2"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

     

    0 right open rear

  • # 00 Left Lull and Porter style Shutter Hinge

    # 00 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open – 8-7/8″

    Hinge throw from casing – 6″

    Hinge Height at mortise- 3-15/16″

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    00 Left lull and porter style shutter hinge open rear

  • # 00 Right Lull and Porter Style Shutter Hinge

    # 00 Right Lull & Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open – 8-3/4″

    Hinge throw from casing – 6″

    Hinge height at mortise -3-15/16″

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    00 Right lull and porter style shutter hinge open rear

  • # 1 1/2 Left Lull and Porter style Shutter Hinge

    # 1 1/2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5-1/8"

    Hinge throw from casing - 3-1/4"

    Hinge Height at mortise- 3"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    one and a half left open rear

  • # 1 1/2 Right Lull and Porter style Shutter Hinge

    # 1 1/2 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5"

    Hinge throw from casing - 3-1/4"

    Hinge Height at mortise - 2-7/8"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    one and a half right open rear

  • # 1 Left Lull and Porter style Shutter Hinges

    # 1 Left Lull and Porter style Shutter Hinges. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5-1/2"

    Hinge throw from casing - 3-11/16"

    Hinge Height at mortise-3-3/16"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

     1 left open rear

  • # 1 Right Lull and Porter style Shutter Hinge

    # 1 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5 -1/2"

    Hinge throw from casing - 3-5/8"

    Hinge Height at Mortise- 3-1/8"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    1 right open rear

  • #  2 1/2 Left Lull and Porter style Shutter Hinge

    # 2 1/2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 3-13/16"

    Hinge throw from casing - 2-1/16"

    Hinge Height at mortise - 2-9/16"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

    two and a half left open rear

  • # 2  1/2 Right lull and Porter style Shutter Hinge

    # 2  1/2 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 3-7/8"

    Hinge Throw from casing - 2-3/16"

    Hinge Height at mortise- 2-7/16"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

    two and a half Right open rear

  • # 2 Left Lull and Porter style Shutter Hinge

    # 2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 4-7/16"

    Hinge throw from casing - 2-5/8"

    Hinge Height at mortise- 2-15/16"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    2 left open rear

  • # 2 Right Lull and Porter style Shutter Hinge

    # 2 Right Lull and Porter style Shutter Hinge. Right shutter hinge mounts on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 4-7/16"

    Hinge throw from casing - 2-1/2"

    Hinge Height at mortise-2-7/8"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

     2 right open rear

  • # 3 Left Lull and Porter style Shutter Hinge

    # 3 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open – 3-1/4″

    Hinge throw from casing – 1-1/2″

    Hinge Height at mortise- 2-9/16"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    3 left open rear

  • Out of stock

    10 Arm Crystal Chandelier

    This Czech Crystal (30% leaded) chandelier features 10 arms and is absolutely loaded with prisms. It dates back to the 1930's and was recently rebuilt and rewired. This one is a stunner! We cannot ship this product UPS , please call for a freight quote!

  • 10 Inch Shutter Slide Bolt

    10 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

    They do not come with screws.

    The back plate at the rear of the bolt measures 6-3/4″ x 1-3/4″

    The bolt measures 6" x 3/4″

    The handle of the bolt projects 5/8″ from the rear

    The keeper measures 2-5/8″ x 1-3/4″

    The bolt throws 2-15/16″ out from the rear plate

  • 12 Inch Shutter Slide Bolt

    12 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

    They do not come with screws.

    The back plate at the rear of the bolt measures 8-13/16″ x 2-1/16″

    The bolt measures 8-3/16″ x 7/8″

    The handle of the bolt projects 3/4″ from the rear

    The keeper measures 3-13/16″ x 2-1/16″

    The bolt throws 3-3/4″ out from the rear plate

    12 Inch Shutter Slide Bolt12in Shutter Slide

  • Out of stock

    15 Inch Steel Hook and Eye

    12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″

    Overall hook length- 12″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    12 inch steel hook and eye

  • Out of stock

    12 Inch Steel Strap Hinge

    12 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 12-1/2" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    12 inch steel Strap hinge

  • Out of stock

    15 Inch Steel Hook and Eye

    15 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 14-1/2″

    Overall hook length- 15-1/2″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    15 inch steel hook and eye

  • Out of stock

    15 Inch Steel Strap Hinge

    15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 15-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    15 inch steel strap hinge

  • Out of stock

    16 Inch Iron Head Bolt

    16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    16 inch iron head bolt

  • Out of stock

    17 Inch Steel Hook and Eye

    17 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 16″

    Overall hook length- 17″

    Back plate size- 1-1/2″ x 3-1/4″  (1-3/8″ deep)

    Eye size- 1-1/2″ x 3-1/4″ (3/4″ deep)

    17 inch steel hook and eye

  • Out of stock

    17 Inch Steel Strap Hinge

    17 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 17-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    17 inch steel strap hinge

  • Out of stock

    1920's Crystal 5 Arm Chandelier

    This 1920's Crystal 5 Arm Chandelier has been cleaned and rewired and is ready to hang. It features Pendalogue crystals at the top and tear drop crystals hanging from the baubaches. There are five arms that take a standard base lamp (no greater than 40 watts each). The five shades are original to the fixture, one is cracked. You can choose to leave them on, or hang it without them.

    The Measurements are as follows:

    24" wide

    24" tall body with crystal

    13" of chain and canopy

    The bottom of this chandelier would hang 37" from the ceiling, perfect for 8' ceilings.

    This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!

  • 28 Inch Iron Head Bolt

    28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    28 inch iron head bolt

  • Out of stock

    3 Foot Gate

    $ 179.60

    3-foot-gate

    3 Foot Gate

    Our 3 foot gate is made from flat steel, hollow steel, and cast iron components. The gate comes with two hollow steel posts, with lift off style hinges included. With each gate you get to choose your finial style- either the spear finial (which matches our loop and spear fencing), or the Fleur de Lis finial. An image of each finial can be seen in the image gallery above. We do not always have these in stock, but we would be happy to order either style for you.   If you are coordinating these with our loop and spear fencing, the 3 foot gate looks best with the 2 foot or the 3 foot tall fencing.

    The measurements are as follows  (measurements may vary slightly as this is a handmade product)

    Gate width without hinges: 36"

    Gate height at center- including finials: 36-1/4"

    Gate height at sides: 30-1/4"

    Post dimensions: 2" x 2"

    MINIMUM Opening measurement required for installation: 41-1/2"

  • 4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing

    4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate-4″

    Overall hook length- 4-1/2″

    Back plate size- 2″ x 1-3/8″  (7/8″ deep)

    Eye size- 2″ x 1-3/8″ (7/8″ deep)

    4 inch cast iron hook and eye diamond back

  • 4 Inch Cast Iron Hook and Eye with Round Backing

    4 Inch Cast Iron Hook and Eye with Round Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 3-1/2"

    Overall hook length- 4"

    Back plate size- 1-3/4" x 1-3/8"  (1-1/4" deep)

    Eye size- 1-3/4" x 1-3/8" (1-1/4" deep)

    4 inch cast iron hook and eye round back

  • Out of stock

    4 Panel Interior Doors

    $ 200.00$ 450.00

    4 Panel Interior Doors

    4 panel interior doors come in three varieties:

    Queen Anne Bead doors- Traditionally have raised panels with a beaded route done vertically through the center of each panel.

    Raised Panel Doors- The most common of the four panel styles, has four raised panels.

    Raised 4 Panel Door

    Flat Panel With Applied Molding- The oldest of the four panel styles, features four flat panels with molding applied to both sides of the door framing the panels.

    Applied Molding 4 Panel Door

    Four panel doors typically come in widths from 30" wide to 34" wide, although we do have some others in odd widths. The heights typically start around 79" and go to 90", although we do have some in odd heights. They range in thickness from 1" to 1-1/2".

    Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.

  • Out of stock

    5 Panel Interior Doors

    $ 200.00$ 450.00

    5 Panel Interior Doors

    5 Panel Interior Doors come in two main varieties:

    Raised Panel- The panels are raised on both sides, and are mainly solid cypress doors.

    Raised 5 Panel Door

    Flat Panel- The panels are flat with either a shaker stile or a stepped profile stile. These doors can be cypress, but they are more common in fir with plywood panels.

    Flat 5 Panel

    Five panel doors typically come in widths from 26″ wide to 34″ wide, although we do have some others in odd widths. The heights typically start around 79″ and go to 84″, although we do have some in odd heights. They range in thickness from 1″ to 1-3/4″.

    Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.

  • Out of stock

    6 Arm Italian Brass and Crystal Chandelier

    This 6 Arm Italian Brass and Crystal Chandelier is rewired and ready to hang. It features six brass arms, with genuine Beeswax candle covers, wired for chandelier base lamps (no greater than 40 watts each). It was probably manufactured between 1920 and 1935. It has crystal tear drops which refract the light perfectly. There is a crystal spear at the center of the fixture as well as a crystal ball at the bottom. This chandelier has brass acanthus leaves and scrolls.

    The measurements are as follows:

    30″ wide

    33″ tall body with crystal

    43″ of chain and canopy

    The bottom of this chandelier would hang 76″ from the ceiling, perfect for 12′ or 14′ ceilings.

    This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!

  • 6 Inch Cast Iron Hook and Eye

    6 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 5-3/8″

    Overall hook length- 6″

    Back plate size- 1-3/4″ x 1-3/8″  (1-1/4″ deep)

    Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

    6 inch cast iron hook and eye

  • 6 Inch Shutter Pull

    6 Inch Shutter Pull. These pulls are usually located on the inner stile of a shutter in order to close it from inside of your window. The handle is done in a bail style and folds away to a 1/4" profile when not in use. These do not come with screws. The rear plate is steel and the handle is cast iron. They come powder coated in a matte black finish.

    The Shutter Pulls have the following dimensions:

    Height- 6-1/4"

    Width- 1"

    Center to Center of outer Screw Holes- 5-1/2"

    Handle height- 3-7/8"

    Handle Depth- 1-1/4"

    6 inch shutter pull

  • 6 Inch Shutter Slide Bolt

    6 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

    They do not come with screws.

    The back plate at the rear of the bolt measures 5" x 1-3/4"

    The bolt measures 6-11/16" x 13/16"

    The handle of the bolt projects 1-1/16" from the rear

    The keeper measures 2-1/4" x 1-3/4"

    The bolt throws 1-15/16" out from the rear plate

    6 inch shutter slide bolt

  • 8 Inch Cast Iron Hook and Eye

    8 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7-7/16″

    Overall hook length- 8″

    Back plate size- 1-3/4″ x 1-3/8″  (1-1/4″ deep)

    Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

    8 inch cast iron hook and eye

  • Out of stock

    8 Inch Iron Foot Bolt

    8 Inch Iron Foot Bolt is most often used on a double door application and secures the stationary door at the bottom, it is highly recommended for use with a head bolt (or top bolt) to prevent warping. The bolt measures 9-1/4″ tall and the rear plate measures 1-7/8″ wide by 5-1/2″ tall. The bolt tongue measures 1-1/16″ when activated, and is 3/4″ wide. The bolt comes with two different keepers, one used when the threshold extends well past the door and can be mortised into, and one used when the threshold does not extend much past the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down with your hand, never forward away from the surface of the door, or operated with your foot (this action would put stress on the weld that attaches the arm to the bolt).

    8 inch iron Foot Bolt

  • 8 Inch Shutter Slide Bolt

    8 Inch Shutter Slide Bolt. These slide shutter bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.
    • They do not come with screws.
    • The back plate at the rear of the bolt measures 6-1/16″ x 1-11/16″
    • The bolt measures 7-51/16″ x 7/8″
    • The handle of the bolt projects 1-1/16″ from the rear
    • The keeper measures 2-1/4″ x 1-3/4″
    • The bolt throws 2-5/8″ out from the rear plate

    Ricca’s Architectural Sales

    511 North Solomon Street, New Orleans, LA 70119 (504) 488 – 5524 or (504) 822-8200 Fax: (504) 488 – 5662, Email: riccaarch@yahoo.com
    Business Hours:
    Tuesday – Friday 9 am – 5 pm Saturday – 9 am – 4 pm

    8 inch shutter slide bolt

  • Out of stock

    8 Inch Steel Hook and Eye

    8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7″

    Overall hook length- 7-3/4″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    8 inch steel Hook and eye

  • 8 Inch Steel Strap Hinge

    8 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 8" long,  1-3/4" wide at widest point, tapers to 1/2" at the end.

    The pintal measures 4-3/4" tall, 1-3/8" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    8 inch steel strap hinge

  • Out of stock

    9 Light Marginal Doors

    $ 370.00$ 850.00

    9 Light Marginal Doors

    9 Light marginal doors- Available in both 6'8" and 8'0" heights. These doors are made of Mahogany and feature beveled, tempered glass. These are sold as slabs only and do not come prehung. It is important to note that if you are ordering pairs of sidelights - each listing is for a single slab, so you will need to order two slabs to make a pair.

    The following sizes are available:

    36" x 80" x 1-3/4" (Currently out of stock)

    32" x 80" x 1-3/4"

    30" x 80" x 1-3/4"

    18" x 80" x 1-3/4" (6 light sidelight- see photos)

    14" x 80" x 1-3/4" (3 light sidelight- see photos)

    36" x 96" x 1-3/4"

    32" x 96" x 1-3/4"

    18" x 96" x 1-3/4" (6 light sidelight)

     

    36" door with 14" sidelights

    30" doors with 18" sidelights

    36" x 80" door

  • Out of stock
    jack on horse2

    Antique "Trotalong" Horse

    This Trotalong Horse was built in Glasgow, Scotland at the turn of the 20th century by Mastercraft of Scotland. It is made of cast aluminum. The original reins are missing, and the springs need adjusting, but overall it is good shape for being over a hundred years old.

  • Out of stock

    SpadeAntique Spade Stained Glass Panel

    28" wide x 29-1/4" tall with all opaque glass

    Two available priced at $450.00 each

  • Out of stock

    Antique Stewart Iron Works Wrought Iron Gate

    Antique Stewart Iron Works Wrought Iron Gate

    This gate, manufactured in Cincinnati, Ohio by the Stewart Ironworks Company, measures 37" wide with the mounting hardware and primitive latch, or 31-1/2" wide as just the gate. It measures 52" tall at the center, and 42" tall at the sides. It needs a weld at the bottom right corner, the top finial is slightly bent, and may need some bondo work at the top left, but is otherwise in great shape for its age.  There is a great makers plaque at the center, pictured in the gallery of images. The primitive latch is still functioning. The gate comes with the portion of the hinge that bolts to your fence post and the rod that attaches your gate to the hinge. The iron details on this gate are exquisite. Please call for a shipping quote if you are interested in this gate as we cannot ship it using UPS.

  • Out of stock

    Ashley Hanging Lantern

    $ 400.00$ 515.00

    Ashley Hanging Lantern

     

    The Ashley hanging lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights

    Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric single light function)
  • Out of stock

    Ashley Post Mount Lantern

    $ 400.00$ 530.00

    Ashley Post Mount Lantern

    The Ashley post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)

  • Out of stock

    Ashley Wall Mount Lantern

    $ 400.00$ 530.00

    Ashley Wall Mount Lantern

    Ashley Wall Mount Lantern

    The Ashley wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric single light function)

  • Out of stock

    Ashley Yolk Mount Lantern

    $ 475.00$ 600.00

    Ashley Yolk Mount Lantern

    The Ashley yolk mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP)

    Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
  • Out of stock

    Atlantic White Flash Sign

    Atlantic White Flash Sign. The Atlantic Refining Company started producing White Flash gasoline around 1931, as one or their premium gasoline options. This side dates somewhere between 1931 and 1934. It is a porcelain one sided sign. It shows it's age as the porcelain has several dings.

    white flash

  • Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"

    Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"- sold as a pair of two hinges (one hinge shown in images). These hinges are made of steel and painted gloss black. The pin is removable for ease of hanging. plain Ball top closed

    Plain ball top open

  • Out of stock

    Basket Weave Bar Height Bistro Set

    The Basket Weave Bistro Set includes two basket weave chairs and a bar height Bistro table (slot machine base with basket weave top). The top of the table measures 32″ in diameter.

    The set is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the set painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    basketweave cafe bar table

  • Out of stock

    Basket Weave Counter Height Bistro Set

    The Basket Weave Bistro Set includes two basket weave chairs and a counter height Bistro table (slot machine base with basket weave top). The top of the table measures 32″ in diameter.

    The set is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the set painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    basketweave cafe bar table

  • Out of stock

    Basket Weave Loveseat

    Basket Weave Loveseat measures 36" wide at the front, 28" wide at the rear, 17" deep, and 33-1/2" tall.

    The loveseat is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the loveseat painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    Basket Weave Bench

  • Out of stock

    Basket Weave Patio Set

    The Basket Weave Patio Set includes four chairs and a patio table. The table top measures 40" in diameter.

    The set is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the set painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    basketweave patio

  • Out of stock

    Basket Weave Table Height Bistro Set

    The Basket Weave Bistro Set includes two basket weave chairs and a table height Bistro table (slot machine base with basket weave top). The top of the table measures 32" in diameter.

    The set is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the set painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    basketweave cafe table height, Basket Weave Table Height Bistro Set

  • Out of stock
    Bennett gas pump

    Bennett Gas Pump

    This Bennett 766 Gas pump, almost completely restored by us, was sold in the beginning of 2014. It has since been painted by its new owner and is on display in his collection. It gives us great pleasure to restore objects like these so that our children and their children can see a bit of the past.

  • Out of stock

    Black Chandelier with Crystal Pendalogues

    This vintage Black Chandelier with Crystal Pendalogues has been rewired and is ready to hang. It has six lights that take candelabra base lamps (maximum of 40 watts each). The Pendalogues are vintage and are in four sizes- 50mm, 70mm, 80mm and 105mm. There is nice fern and pineapple details on the body of this chandelier.

    The measurements are as follows:

    17" wide

    22" body height with crystal

    13" of chain and canopy

    The bottom of the chandelier would hang 35" from the ceiling- perfect for 8' ceilings

    This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!

     
  • Brass Acanthus Door Bell

    Brass Acanthus Door Bell measures 2-7/8" wide and 6-1/4" tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.

    Acanthus Door Bell

  • Brass Ball Top Hinges 4-1/2" x 5"

    Brass Ball Top Hinges 4-1/2" x 5"  includes two hinges with removable pins.

    four and a half by five brass hinge

  • Brass Ball Top Hinges 6" x 6"

    Brass Ball Top Hinges 6" x 6" include two hinges with removable pins.

    six by six brass hinge

  • Brass Casement Sash Latch

    Brass Casement Sash Latch comes with the latch, and three different keepers (one meant for use with a pair of casements which is surface mount and two meant for use with a single casement which mortises into the jamb).

    The latch's back plate measures 2-1/16" tall, 1-5/16" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The first mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb and the second mortised keeper measures 5/8" x 2-3/8" x 1/16".

    brass casement latch

  • Brass Casement Stay

    Brass Casement Stay is made to secure casement windows in either a closed or open position. The Maximum throw is 10-1/2". These are meant for use in an outswing application only.

    brass casement stay

  • Brass Eastlake Door Bell

    Brass Eastlake Door Bell measures 2-1/4″ wide and 6-3/8″ tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.

    Eastlake Style Door Bell

  • Brass Eastlake Pull

    Brass Eastlake Pull measures 4-1/4" tall, 1-5/8" wide, and 1" deep.

    Eastlake Pull

  • Brass Embossed Sash Lock

    Brass Embossed Sash Lock can be used either with casement or double hung windows. With double hung sashes the moving part of the latch would mount to the bottom sash and the keeper would mount to the top sash.  The back plate of the keeper measures 2-3/8" x 7/8" and is a total of 3/4" tall. The back plate of the moving part of the latch measures 2-3/8" x 1-1/8". The arm measures 3-1/4" x 1".

    Brass Embossed Sash Lock

  • Brass Fleur de Lis Pull

    Brass Fleur de Lis Pull measures 6-1/2" tall, 1-3/8" wide, and 1" deep. The screw holes measure 4-1/2" center to center.

    Brass Fleur De Lis Pull

  • Brass Flush Bolt

    Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and  1-3/8" wide.

      Brass Flush Bolt

  • Out of stock

    Brass Knuckle Sash Lock

    Brass Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x  3/4". It is made of solid brass.

    Brass Knuckle Sash Lock

  • Out of stock

    Brass Lion Door Knocker

    Brass Lion Door Knocker's back plate measures 3-1/4" wide and 4-1/4" tall, the overall height is 6". The strike plate measures 1-3/8" in diameter.  The knocker and  strike plate attach to your door with machine style bolts, that extend through the rear of your door.

    Brass Lion Door Knocker

Title

Go to Top