Brass

brass finish (standard)

Solid Brass St. Julian Knobs and Plates Set

$ 42.00 – $ 60.00

Solid Brass St. Julian Knobs and Plates Set

Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.

The plates measure 2-1/2″ x 8-1/2″

The Knobs are 2-3/8″ in diameter

The set projects 2-1/2″ from the face of the door

Select options Details
Solid Brass Concentric Knobs and Plates Set

$ 48.00 – $ 142.00

Solid Brass Concentric Knobs and Plates Set

Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below to suit your needs.

We also have these available in a tarnished metal, although color may vary we have attached a photo of a tarnished set below. These sets were under water during Hurricane Katrina, and are priced lower than our list price.

The back plates measure 2-1/2″ x 7-9/16″ at their widest points

The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door

Select options Details
Solid Brass Exterior Alby Knobs and Plates Set

$ 125.00 – $ 215.00

Solid Brass Exterior Alby Knobs and Plates Set

Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.

The plates measure 2-3/4″ x 10-1/2″

The Knobs are 2-1/8″ in diameter

The set projects 2-3/4″ from the face of the door

Select options Details
Plated steel hinges- several sizes and colors to choose from

$ 30.00 – $ 45.00

Plated steel hinges- several sizes and colors to choose from

Plated steel hinges- several sizes and colors to choose from.

These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:

3" x 3" in brass or bronze

This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.

3-1/2" x 3-1/2" in all finishes

This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.

4" x 4" in all finishes

This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.

Select options Details
Solid Brass Exterior Lorraine Knobs and Plates Set

$ 175.00 – $ 265.00

Solid Brass Exterior Lorraine Knobs and Plates Set

Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.

The plates measure 2-3/4″ x 10-7/8″

The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door

The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door

Select options Details
Embossed Kick Bolts

$ 35.00 – $ 48.00

Embossed Kick Bolts

Embossed kick bolts- available in two sizes and two finishes

The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows. We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.

The small bolts have the following measurements:

The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

The large bolts have the following measurements:

The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

Select options Details