Small Ebonized Wood and Brass Pull
Small Ebonized Wood and Brass Pull measures 1" in diameter and project 1-1/4". It mounts with a bolt that measures 1-3/8" long and a nut.
-
Traditional Brass Sash Lock
Traditional Brass Sash Lock is meant for use with double hung style windows. The base of the latch measures 2-5/8" x 7/8" and the base of the keeper measures 2-1/2" x 5/8".
-
Three Inch Steeple Top Embossed Brass Hinges
Three Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.
-
Out of stock
Three and a Half Inch Steeple Top Embossed Brass Hinges
Three and a Half Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.
-
Solid Brass St. Julian Knobs and Plates Set
Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 2-1/2″ x 8-1/2″
The Knobs are 2-3/8″ in diameter
The set projects 2-1/2″ from the face of the door
-
Out of stock
Solid Brass Rose Knobs and Rosettes Set
Solid Brass Rose Knobs and Rosettes Set. This set mimics the Victorian decadence and pattern. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two rosettes, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below for all of your other needs.
The rosettes measure 2-3/8″ in diameter
The knobs measure 2-3/8″ in diameter and rise 2-3/4″ from the surface of the door
-
Out of stock
Solid Brass Ossa Plates and Knobs Set
Solid Brass Ossa Door Plates and Knobs Set. Originally patented in 19101 by Russell and Erwin the “Ossa” pattern was used at the through the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 2-9/16″ x 8-5/16″
The Knobs are 2-1/4″ in diameter
The set projects 2-1/2″ from the face of the door
-
Out of stock
Solid Brass Magnolia Door Knobs and Plates Set
Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-5/8″ x 5-3/8″
The Knobs are 2-3/16″ in diameter
The set projects 2-1/2″ from the face of the door
-
Solid Brass Knob and Lever Set With Rosettes
Solid Brass Knob and Lever Set with Rosettes. This set mimics screen door and small French door knob and lever sets found in New Orleans. The set comes with one knob, one lever, one circular rosette, one oval rosette, a shaft that connects the knob to the lever with set screws, and two set screws. This set will not work on predrilled doors, nor can it be made into "dummy knobs". It does not come with any latching or locking device.
The knob measures 1-3/4" in diameter and rises 2-1/8" from the surface of the door
The lever measures 3" long 7/8" in diameter at shank and rises 2-1/2" from the surface of the door
The round rosette measures 1-3/4" in diameter
The oval rosette measures 1-3/4" x 1-3/8"
-
Solid Brass Jerome Knobs and Plates Set
Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.
The plates measure 2-1/2″ x 9-1/8″
The Knobs are 2-1/4″ in diameter
The set projects 3″ from the face of the door
-
Out of stock
Solid Brass Gothic Knobs and Plates Set
Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.
The back plates measure 1-5/8″ x 6-1/8″ at their widest points
The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door
-
Solid Brass Exterior Meridian Knobs and Plates Set
Solid Brass Exterior Meridian Door Knobs and Plates Set. Originally patented in 1900 by Yale & Towne Manufacturing the “Meridian” pattern was used in much of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 2-3/4″ x 10-7/8″
The knobs measures 2-1/8″ in diameter and projects 2-5/8″ from the surface of the door
-
Solid Brass Exterior Lorraine Knobs and Plates Set
Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.
The plates measure 2-3/4″ x 10-7/8″
The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door
The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door
-
Out of stock
Solid Brass Exterior Beaded Oval Knobs and Plates Set
Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.
The back plates measure 2-7/8″ x 9-3/4″ at their widest points
The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door
-
Solid Brass Exterior Alby Knobs and Plates Set
Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.
The plates measure 2-3/4″ x 10-1/2″
The Knobs are 2-1/8″ in diameter
The set projects 2-3/4″ from the face of the door
-
Solid Brass Daisy Knobs and Plates Set
Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-3/4″ x 5-11/16″
The Knobs are 2-1/4″ in diameter
The set projects 2-1/2″ from the face of the door
-
Solid Brass Concentric Knobs and Plates Set
Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below to suit your needs.
The back plates measure 2-1/2″ x 7-9/16″ at their widest points
The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door
-
Out of stock
Solid Brass Broken Leaf Knobs and Plates Set
Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-1/2″ x 5-5/16″
The Knobs are 2-1/4″ in diameter
The set projects 2-1/2″ from the face of the door
-
Out of stock
Solid Brass Beaded Oval Knobs and Plates Set
Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.
The back plates measure 2-1/4″ x 7″ at their widest points
The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door
-
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
-
Solid Brass Ball Bearing Hinges - ball finial in multiple sizes
Solid Brass Ball Bearing Hinges - ball finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
-
Out of stock
Solid Brass Amarat Door Knobs and Plates Set
Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.
The plates measure 1-1/2" x 5-1/2"
The Knobs are 2-1/4" in diameter
The set projects 2-1/4" from the face of the door
-
Out of stock
Small Iron Fleur de Lis Pull
Small Iron Fleur de Lis Pull measure 5-1/4" tall, 1-1/4" wide, and 1" deep. The screw holes measure 3-1/2" center to center. They are painted black.
-
Small Brass Door Bolt
Small Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 3-3/4" long and 1-3/8" wide, stands 1-1/4" tall from the surface of the door, and throws 10/16". The keeper measures 7/8" long and 1-1/4" tall.
-
Small Brass Bin Pull
Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.
-
Shutter Catches
Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.
-
Rustic Iron Pull Handle
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
-
Plated steel hinges- several sizes and colors to choose from
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
-
Oval Iron Bin Pull
Oval Iron Bin Pull measures 3-3/8" wide, 1-3/8" tall, and 3/4" deep. The screw holes measure 2-7/8" center to center. They are painted black.
-
Out of stock
Medium Iron Fleur de Lis Pull
Medium Iron Fleur de Lis Pull measures 7-1/4" tall, 1-1/2" wide, and 1-1/2" deep. The screw holes measure 5-5/16" center to center. They are painted black.
-
Medium Brass Door Bolt
Medium Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 4-1/2″ long and 1-1/4″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-1/4″. The keeper measures 1-1/4″ long and 1-1/2″ tall.
-
Medium Brass Bin Pull
Medium Brass Bin Pull measures 3-1/2" wide, 1" tall, and 5/8" deep. The screw holes measure 3" center to center.
-
Out of stock
Large Iron Fleur de Lis Pull
Large Iron Fleur de Lis Pull measures 9" tall, 1-5/8" wide, and 1-7/8" deep. The screw holes measure 7-5/8" center to center. They are painted black.
-
Large Ebonized Wood and Brass Pull
Large Ebonized Wood and Brass Pull measures 1-1/2" in diameter and project 1-3/8". It mounts with a bolt that measures 1-3/8" long and a nut.
-
Large Brass Door Bolt
Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and 1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″. The keeper measures 1-1/4″ long and 1-1/2″ tall.
-
Large Brass Bin Pull
Large Brass Bin Pull measures 4" wide, 1" tall, and 5/8" deep. the screw holes are 3-1/2" center to center.
-
Iron Window Y
Iron Window Y's are used when the sash no longer stays up on it's own due to damaged or missing sash weights and balances. They mount to the jamb at about the level you want your window open and with a loose screw will pivot in or out of the way of the sash. The bottom of the sash is held up by the v shaped section, with the short end facing the exterior of the home.
The Y measures 2-5/8" long, 2" at it's widest point, and 1/4" thick. It is made of cast iron and painted white.
-
Iron Victorian Pull Handle
The iron Victorian pull handle is made of cast iron and powder coated in a black finish. The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.
-
Out of stock
Iron Transom Latch
Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.
-
Iron Spanish Rose Bin Pull
Iron Spanish Rose Bin Pull measure 4-1/8" wide, 1-5/8" tall, and 1-1/16" deep. The screw holes measure 3-3/8" center to center. They are painted black.
-
Iron Sash Pulley
Iron Sash Pulley measures 4-3/4" x 1-1/4" at the face, it mortises 2-3/8" deep into the jamb of the window.
-
Iron Rectangular Bin Pull
Iron Rectangular Bin Pull measures 3-1/2" wide, 1-1/2" tall, and 3-4" deep. The screw holes measure 2-7/8" center to center. They are painted black.
-
Iron Pivot Hinge for Transoms
Iron pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are made of cast iron and left unfinished.
The pin side has the following measurements:
Center to center of screw hole 1-1/2"
Face of Hinge -2-3/8" tall, 7/8" wide, and mortises 1/8" into the face of the transom.
Side of hinge- 5/8" tall, 7/8" wide, 1/8" thick, center of pin to edge 3/4", pin diameter 3/8", pin length 11/16"
The receiver side has the following measurements:
Center to center of screw hole 1-1/8"
Diameter of center hole 7/16"
1-11/16" tall, 3/4" wide and 1/8" deep
-
Iron Parliament Hinge with Three Inch Offset
Iron Parliament Hinge with Three Inch Offset measures a total of 5-1/8" wide and 2-7/8" tall. It mortises into the door or jamb 1" x 2-7/8" and has a throw of 3" when open. The pin on the hinge is removable making it function as either a right or left hand swing.
-
Iron Parliament Hinge with Four and Three Quarter Inch Offset
Iron Parliament Hinge with Four and Three Quarter Inch Offset measures a total of 7″ wide and 3-3/8″ tall. It mortises into the door or jamb 1-1/8″ x 3-3/8″ and has a throw of 4-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.
-
Iron Parliament Hinge with Four and a Quarter Inch Offset
Iron Parliament Hinge with Four and a Quarter Inch Offset measures a total of 6-3/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1″ x 2-7/8″ and has a throw of 4-1/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.
-
Iron Parliament Hinge with Five and Three Quarter Inch Offset
Iron Parliament Hinge with Five and Three Quarter Inch Offset measures a total of 7-7/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1-1/16″ x 2-7/8″ and has a throw of 5-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.
-
Out of stock
Iron Oval Pull
Iron Oval Pull measures 1-3/4" tall, 1-1/8" wide, and 1-1/2" deep. It mounts with an attached wood screw.
