Medium Iron Fleur De Lis Pulls
Medium Iron Fleur De Lis Pull measures 5-3/8" long, 1-1/4" wide and 7/8" deep. The screw holes measure 3-1/2" center to center. They are painted black.
-
Iron Victorian Pull Handle
The iron Victorian pull handle is made of cast iron and powder coated in a black finish. The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.
-
Rustic Iron Pull Handle
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
-
Embossed Kick Bolts
Embossed kick bolts- available in two sizes and two finishes
The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows. We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.
The small bolts have the following measurements:
The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
The large bolts have the following measurements:
The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
-
Out of stock
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Currently available in 3-1/2" x 3-1/2". Features five knuckles with two ball bearings and three screw holes per side.
-
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
-
Plated steel hinges- several sizes and colors to choose from
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
-
Brass Casement Sash Latch
Brass Casement Sash Latch comes with the latch, and three different keepers (one meant for use with a pair of casements which is surface mount and two meant for use with a single casement which mortises into the jamb).
The latch's back plate measures 2-1/16" tall, 1-5/16" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The first mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb and the second mortised keeper measures 5/8" x 2-3/8" x 1/16".
-
Iron Casement Sash Latch
Iron Casement Sash Latch comes with the latch, and two different keepers (one meant for use with a pair of casements which is surface mount and one meant for use with a single casement which mortises into the jamb).
The latch's back plate measures 2-1/8" tall, 1-1/4" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb.
-
Brass Knuckle Sash Lock
Brass Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x 3/4". It is made of solid brass.
-
Iron Knuckle Sash Lock
Iron Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x 3/4". It is made of cast iron and painted black.
-
Traditional Brass Sash Lock
Traditional Brass Sash Lock is meant for use with double hung style windows. The base of the latch measures 2-5/8" x 7/8" and the base of the keeper measures 2-1/2" x 5/8".
-
Iron Oval Pull
Iron Oval Pull measures 1-3/4" tall, 1-1/8" wide, and 1-1/2" deep. It mounts with an attached wood screw.
-
Small Ebonized Wood and Brass Pull
Small Ebonized Wood and Brass Pull measures 1" in diameter and project 1-1/4". It mounts with a bolt that measures 1-3/8" long and a nut.
-
Large Ebonized Wood and Brass Pull
Large Ebonized Wood and Brass Pull measures 1-1/2" in diameter and project 1-3/8". It mounts with a bolt that measures 1-3/8" long and a nut.
-
Brass Eastlake Pull
Brass Eastlake Pull measures 4-1/4" tall, 1-5/8" wide, and 1" deep.
-
Brass Fleur de Lis Pull
Brass Fleur de Lis Pull measures 6-1/2" tall, 1-3/8" wide, and 1" deep. The screw holes measure 4-1/2" center to center.
-
Out of stock
Embossed Brass Pull
Embossed Brass Pull measures 6-1/2" tall, 1-1/4" wide, and 1-1/4" deep.
-
-
-
Solid Brass Exterior Lorraine Knobs and Plates Set
Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.
The plates measure 2-3/4″ x 10-7/8″
The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door
The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door
-
Solid Brass Exterior Alby Knobs and Plates Set
Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.
The plates measure 2-3/4″ x 10-1/2″
The Knobs are 2-1/8″ in diameter
The set projects 2-3/4″ from the face of the door
-
Solid Brass Concentric Knobs and Plates Set
Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below to suit your needs.
We also have these available in a tarnished metal, although color may vary we have attached a photo of a tarnished set below. These sets were under water during Hurricane Katrina, and are priced lower than our list price.
The back plates measure 2-1/2″ x 7-9/16″ at their widest points
The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door
-
Solid Brass Exterior Meridian Knobs and Plates Set
Solid Brass Exterior Meridian Door Knobs and Plates Set. Originally patented in 1900 by Yale & Towne Manufacturing the “Meridian” pattern was used in much of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 2-3/4″ x 10-7/8″
The knobs measures 2-1/8″ in diameter and projects 2-5/8″ from the surface of the door
