(504) 488-5524 or (504) 822-8200|riccaarch@yahoo.com
FacebookYouTube

Door Hardware

Home/Hardware/Door Hardware

Bolts, latches, locks, hinges, accessories and handles

  • Large Brass Kick Bolt - Ricca's Architectural Sales

    Embossed Kick Bolts

    $ 35.00 – $ 48.00

    Embossed Kick Bolts

    Embossed kick bolts- available in two sizes and two finishes

    The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows.  We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.

    The small bolts have the following measurements:

      The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

    The large bolts have the following measurements:

    The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

    Select options Details
  • Iron Pull Handle

    Iron Victorian Pull Handle

    $ 85.00

    Iron Victorian Pull Handle

    The iron Victorian pull handle is made of cast iron and powder coated in a black finish.  The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.

    Iron Pull Handle

    Add to cart Details
  • Iron Pull Handle

    Rustic Iron Pull Handle

    $ 24.00

    Rustic Iron Pull Handle

    The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.

    Iron Pull Handle

    Add to cart Details
  • Out of stock

    Solid Brass Ball Bearing Hinges – ball finial in 3-1/2″ x 3-1/2″

    $ 38.00

    Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"

    Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Currently available in 3-1/2" x 3-1/2".  Features five knuckles with two ball bearings and three screw holes per side.

    Details

  • Solid Brass Ball Bearing Hinges – steeple finial in multiple sizes

    $ 38.00 – $ 48.00

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

    Select options Details

  • Plated steel hinges- several sizes and colors to choose from

    $ 30.00 – $ 45.00

    Plated steel hinges- several sizes and colors to choose from

    Plated steel hinges- several sizes and colors to choose from.

    These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:

    3" x 3" in brass or bronze

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter.  This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.

    3-1/2" x 3-1/2" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter.  This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.

    4" x 4" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.

    Select options Details

  • Brass Victorian Hand Door Knocker

    $ 28.00

    hand-knockersBrass Victorian Hand Door Knocker

    Brass Victorian Hand Door Knocker measures 2-3/4" wide and 5-1/4" tall overall. The strike plate measures 1-1/4" in diameter.  The knocker and  strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

     

    Add to cart Details

  • Iron Fleur de Lis Door Knocker

    $ 22.00

    fleur-de-lis-door-knocker

    Iron Fleur de Lis Door Knocker

    Iron Fleur de Lis Door Knocker measures 3-7/8" wide and 5-1/4" tall overall. The strike plate measures 1-3/4" in diameter. The knocker and  strike plate attach to your door with machine style bolts, that extend through the rear of your door.

     

     
    Add to cart Details

  • Solid Brass Exterior Meridian Knobs and Plates Set

    $ 125.00

    Solid Brass Exterior Meridian Knobs and Plates Set

    Solid Brass Exterior Meridian Door Knobs and Plates Set. Originally patented in 1900 by Yale & Towne Manufacturing the “Meridian” pattern was used in much of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-3/4″ x 10-7/8″

    The knobs measures 2-1/8″ in diameter and projects 2-5/8″ from the surface of the door

    RA-2001

    Add to cart Details

  • Solid Brass Exterior Lorraine Knobs and Plates Set

    $ 175.00 – $ 265.00

    Solid Brass Exterior Lorraine Knobs and Plates Set

    Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was  used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.

    The plates measure 2-3/4″ x 10-7/8″

    The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door

    The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door

    R-170

    Select options Details

  • Solid Brass Exterior Alby Knobs and Plates Set

    $ 125.00 – $ 215.00

    Solid Brass Exterior Alby Knobs and Plates Set

    Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.

    The plates measure 2-3/4″ x 10-1/2″

    The Knobs are 2-1/8″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA-10.JPG

    Select options Details

  • Solid Brass Concentric Knobs and Plates Set

    $ 48.00 – $ 142.00

    Solid Brass Concentric Knobs and Plates Set

    Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors,  but can be customized below to suit your needs.

    We also have these available in a tarnished metal, although color may vary we have attached a photo of a tarnished set below. These sets were under water during Hurricane Katrina, and are priced lower than our list price.

    The back plates measure 2-1/2″ x 7-9/16″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door

    PA-9.JPG

    Select options Details

  • Solid Brass Haven Knobs and Plates Set

    $ 62.00

    Solid Brass Haven Knobs and Plates Set

    Solid Brass Haven Door Knobs and Plates Set. Originally patented in 1905 by Sargent Hardware Company the “Haven” pattern was used at the end of the Victorian era, as well as through the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, but it can be made into “dummy knobs”(call for price). They do not come with any latch or locking device.

    The plates measure 2-1/4″ x 8-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA8

    Add to cart Details

  • Solid Brass St. Julian Knobs and Plates Set

    $ 42.00 – $ 60.00

    Solid Brass St. Julian Knobs and Plates Set

    Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 8-1/2″

    The Knobs are 2-3/8″ in diameter

    The set projects 2-1/2″ from the face of the door

    RO31b

    Select options Details

  • Solid Brass Jerome Knobs and Plates Set

    $ 63.00

    Solid Brass Jerome Knobs and Plates Set

    Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 9-1/8″

    The Knobs are 2-1/4″ in diameter

    The set projects 3″ from the face of the door

    337 A

    Add to cart Details
  • Out of stock

    Solid Brass Broken Leaf Knobs and Plates Set

    $ 46.00

    Solid Brass Broken Leaf Knobs and Plates Set

    Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-1/2″ x 5-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R108

    Details

  • Solid Brass Daisy Knobs and Plates Set

    $ 46.00

    Solid Brass Daisy Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-3/4″ x 5-11/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R107

    Add to cart Details
  • Out of stock

    Solid Brass Magnolia Door Knobs and Plates Set

    $ 46.00

    Solid Brass Magnolia Door Knobs and Plates Set

    Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was  used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-5/8″ x 5-3/8″

    The Knobs are 2-3/16″ in diameter

    The set projects 2-1/2″ from the face of the door

    R106

    Details
  • Out of stock

    Solid Brass Amarat Door Knobs and Plates Set

    $ 46.00

    Solid Brass Amarat Door Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.

    The plates measure 1-1/2" x 5-1/2"

    The Knobs are 2-1/4" in diameter

    The set projects 2-1/4" from the face of the door

    R105

    Details
  • Out of stock

    Solid Brass Exterior Beaded Oval Knobs and Plates Set

    $ 95.00

    Solid Brass Exterior Beaded Oval Knobs and Plates Set

    Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 2-7/8″ x 9-3/4″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door

    PA-2

    Details

  • Solid Brass Knob and Lever Set with Rosettes

    $ 41.00

    Solid Brass Knob and Lever Set With Rosettes

    Solid Brass Knob and Lever Set with Rosettes. This set mimics screen door and small French door knob and lever sets found in New Orleans. The set comes with one knob, one lever, one circular rosette, one oval rosette, a shaft that connects the knob to the lever with set screws, and two set screws. This set will not work on predrilled doors, nor can it be made into "dummy knobs". It does not come with any latching or locking device.

    The knob measures 1-3/4" in diameter and rises 2-1/8" from the surface of the door

    The lever measures 3" long 7/8" in diameter at shank and rises 2-1/2" from the surface of the door

    The round rosette measures 1-3/4" in diameter

    The oval rosette measures 1-3/4" x 1-3/8"

    PA14

    Add to cart Details
  • Out of stock

    Solid Brass Gothic Knobs and Plates Set

    $ 45.00

    Solid Brass Gothic Knobs and Plates Set

    Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 1-5/8″ x 6-1/8″ at their widest points

    The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door

    PA-7.JPG

     
    Details

  • Iron Beaded Oval Knobs and Plates Set

    $ 38.00

    Iron Beaded Oval Knobs and Plates Set

    Iron Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of iron and powder coated in a matte black finish. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into "dummy knobs" (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-3/8" x 7" at their widest points

    The knobs measure 1-3/4" x 2-3/4" at their widest points and rise 2-3/4" from the surface of the door

    VB1197I

    Add to cart Details
  • Out of stock

    Solid Brass Beaded Oval Knobs and Plates Set

    $ 45.00

    Solid Brass Beaded Oval Knobs and Plates Set

    Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-1/4″ x 7″ at their widest points

    The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door

    VB1197B
    Details

Title

Go to Top