Small Brass Bin Pull
Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.
Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
Medium Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 4-1/2″ long and 1-1/4″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-1/4″. The keeper measures 1-1/4″ long and 1-1/2″ tall.
Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and 1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″. The keeper measures 1-1/4″ long and 1-1/2″ tall.
Iron Window Y's are used when the sash no longer stays up on it's own due to damaged or missing sash weights and balances. They mount to the jamb at about the level you want your window open and with a loose screw will pivot in or out of the way of the sash. The bottom of the sash is held up by the v shaped section, with the short end facing the exterior of the home.
The Y measures 2-5/8" long, 2" at it's widest point, and 1/4" thick. It is made of cast iron and painted white.
The iron Victorian pull handle is made of cast iron and powder coated in a black finish. The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.
Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.
Iron pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are made of cast iron and left unfinished.
The pin side has the following measurements:
Center to center of screw hole 1-1/2"
Face of Hinge -2-3/8" tall, 7/8" wide, and mortises 1/8" into the face of the transom.
Side of hinge- 5/8" tall, 7/8" wide, 1/8" thick, center of pin to edge 3/4", pin diameter 3/8", pin length 11/16"
The receiver side has the following measurements:
Center to center of screw hole 1-1/8"
Diameter of center hole 7/16"
1-11/16" tall, 3/4" wide and 1/8" deep
Iron Parliament Hinge with Three Inch Offset measures a total of 5-1/8" wide and 2-7/8" tall. It mortises into the door or jamb 1" x 2-7/8" and has a throw of 3" when open. The pin on the hinge is removable making it function as either a right or left hand swing.
Iron Parliament Hinge with Four and Three Quarter Inch Offset measures a total of 7″ wide and 3-3/8″ tall. It mortises into the door or jamb 1-1/8″ x 3-3/8″ and has a throw of 4-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.
Iron Parliament Hinge with Four and a Quarter Inch Offset measures a total of 6-3/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1″ x 2-7/8″ and has a throw of 4-1/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.
Iron Parliament Hinge with Five and Three Quarter Inch Offset measures a total of 7-7/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1-1/16″ x 2-7/8″ and has a throw of 5-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.