(504) 488-5524 or (504) 822-8200|riccaarch@yahoo.com
FacebookYouTube

Hardware

Home/Hardware
  •

    Plated steel hinges- several sizes and colors to choose from

    $ 30.00 – $ 45.00

    Plated steel hinges- several sizes and colors to choose from

    Plated steel hinges- several sizes and colors to choose from.

    These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:

    3" x 3" in brass or bronze

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter.  This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.

    3-1/2" x 3-1/2" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter.  This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.

    4" x 4" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.

    Select options Details
  • Iron Pull Handle

    Rustic Iron Pull Handle

    $ 24.00

    Rustic Iron Pull Handle

    The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.

    Iron Pull Handle

    Add to cart Details

  • Shutter Catches

    $ 4.00

    Shutter Catches

    Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.

     cincinatti catch

    Add to cart Details

  • Small Brass Bin Pull

    $ 6.00

    Small Brass Bin Pull

    Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.

    1135-pb

    Add to cart Details

  • Small Brass Door Bolt

    $ 12.00

    Small Brass Door Bolt

    Small Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 3-3/4" long and  1-3/8" wide, stands 1-1/4" tall from the surface of the door, and throws 10/16".  The keeper measures 7/8" long and 1-1/4" tall.

    Small Brass Door Bolt

     
    Add to cart Details
  • Out of stock

    Small Iron Fleur de Lis Pull

    $ 5.50

    Small Iron Fleur de Lis Pull

    Small Iron Fleur de Lis Pull measure 5-1/4" tall, 1-1/4" wide, and 1" deep. The screw holes measure 3-1/2" center to center. They are painted black.

    Small Fleur De Lis Pull

    Details
  • Out of stock

    Solid Brass Amarat Door Knobs and Plates Set

    $ 46.00

    Solid Brass Amarat Door Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.

    The plates measure 1-1/2" x 5-1/2"

    The Knobs are 2-1/4" in diameter

    The set projects 2-1/4" from the face of the door

    R105

    Details

  • Solid Brass Ball Bearing Hinges – ball finial in multiple sizes

    $ 38.00 – $ 48.00

    Solid Brass Ball Bearing Hinges - ball finial in multiple sizes

    Solid Brass Ball Bearing Hinges - ball finial in multiple sizes

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

    Select options Details

  • Solid Brass Ball Bearing Hinges – steeple finial in multiple sizes

    $ 38.00 – $ 48.00

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

    Select options Details
  • Out of stock

    Solid Brass Beaded Oval Knobs and Plates Set

    $ 45.00

    Solid Brass Beaded Oval Knobs and Plates Set

    Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-1/4″ x 7″ at their widest points

    The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door

    VB1197B
    Details
  • Out of stock

    Solid Brass Broken Leaf Knobs and Plates Set

    $ 46.00

    Solid Brass Broken Leaf Knobs and Plates Set

    Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-1/2″ x 5-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R108

    Details

  • Solid Brass Concentric Knobs and Plates Set

    $ 62.00 – $ 142.00

    Solid Brass Concentric Knobs and Plates Set

    Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors,  but can be customized below to suit your needs.

    The back plates measure 2-1/2″ x 7-9/16″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door

    PA-9.JPG

    Select options Details

  • Solid Brass Daisy Knobs and Plates Set

    $ 46.00

    Solid Brass Daisy Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-3/4″ x 5-11/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R107

    Add to cart Details

  • Solid Brass Exterior Alby Knobs and Plates Set

    $ 125.00 – $ 215.00

    Solid Brass Exterior Alby Knobs and Plates Set

    Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.

    The plates measure 2-3/4″ x 10-1/2″

    The Knobs are 2-1/8″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA-10.JPG

    Select options Details
  • Out of stock

    Solid Brass Exterior Beaded Oval Knobs and Plates Set

    $ 95.00

    Solid Brass Exterior Beaded Oval Knobs and Plates Set

    Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 2-7/8″ x 9-3/4″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door

    PA-2

    Details

  • Solid Brass Exterior Lorraine Knobs and Plates Set

    $ 175.00 – $ 265.00

    Solid Brass Exterior Lorraine Knobs and Plates Set

    Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was  used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.

    The plates measure 2-3/4″ x 10-7/8″

    The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door

    The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door

    R-170

    Select options Details

  • Solid Brass Exterior Meridian Knobs and Plates Set

    $ 125.00

    Solid Brass Exterior Meridian Knobs and Plates Set

    Solid Brass Exterior Meridian Door Knobs and Plates Set. Originally patented in 1900 by Yale & Towne Manufacturing the “Meridian” pattern was used in much of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-3/4″ x 10-7/8″

    The knobs measures 2-1/8″ in diameter and projects 2-5/8″ from the surface of the door

    RA-2001

    Add to cart Details
  • Out of stock

    Solid Brass Gothic Knobs and Plates Set

    $ 45.00

    Solid Brass Gothic Knobs and Plates Set

    Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 1-5/8″ x 6-1/8″ at their widest points

    The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door

    PA-7.JPG

     
    Details

  • Solid Brass Jerome Knobs and Plates Set

    $ 63.00

    Solid Brass Jerome Knobs and Plates Set

    Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 9-1/8″

    The Knobs are 2-1/4″ in diameter

    The set projects 3″ from the face of the door

    337 A

    Add to cart Details

  • Solid Brass Knob and Lever Set with Rosettes

    $ 41.00

    Solid Brass Knob and Lever Set With Rosettes

    Solid Brass Knob and Lever Set with Rosettes. This set mimics screen door and small French door knob and lever sets found in New Orleans. The set comes with one knob, one lever, one circular rosette, one oval rosette, a shaft that connects the knob to the lever with set screws, and two set screws. This set will not work on predrilled doors, nor can it be made into "dummy knobs". It does not come with any latching or locking device.

    The knob measures 1-3/4" in diameter and rises 2-1/8" from the surface of the door

    The lever measures 3" long 7/8" in diameter at shank and rises 2-1/2" from the surface of the door

    The round rosette measures 1-3/4" in diameter

    The oval rosette measures 1-3/4" x 1-3/8"

    PA14

    Add to cart Details
  • Out of stock

    Solid Brass Magnolia Door Knobs and Plates Set

    $ 46.00

    Solid Brass Magnolia Door Knobs and Plates Set

    Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was  used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-5/8″ x 5-3/8″

    The Knobs are 2-3/16″ in diameter

    The set projects 2-1/2″ from the face of the door

    R106

    Details
  • Out of stock

    Solid Brass Ossa Plates and Knobs Set

    $ 68.00

    Solid Brass Ossa Plates and Knobs Set

    Solid Brass Ossa Door Plates and Knobs Set. Originally patented in 19101 by Russell and Erwin the “Ossa” pattern was used at the through the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-9/16″ x 8-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R33.JPG

    Details
  • Out of stock

    Solid Brass Rose Knobs and Rosettes Set

    $ 54.00 – $ 109.75

    Solid Brass Rose Knobs and Rosettes Set

    Solid Brass Rose Knobs and Rosettes Set. This set mimics the Victorian decadence and pattern. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two rosettes, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below for all of your other needs.

    The rosettes measure 2-3/8″ in diameter

    The knobs measure 2-3/8″ in diameter and rise 2-3/4″ from the surface of the door

    R-30-A

    Details

  • Solid Brass St. Julian Knobs and Plates Set

    $ 52.00

    Solid Brass St. Julian Knobs and Plates Set

    Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 8-1/2″

    The Knobs are 2-3/8″ in diameter

    The set projects 2-1/2″ from the face of the door

    RO31b

    Add to cart Details
  • Out of stock

    Three and a Half Inch Steeple Top Embossed Brass Hinges

    $ 38.00

    Three and a Half Inch Steeple Top Embossed Brass Hinges

    Three and a Half Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

    three and a half inch embossed brass hinge

    Details

  • Three Inch Steeple Top Embossed Brass Hinges

    $ 38.00

    Three Inch Steeple Top Embossed Brass Hinges

    Three Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

    three inch embossed brass hinges

    Add to cart Details

  • Traditional Brass Sash Lock

    $ 10.00

    Traditional Brass Sash Lock

    Traditional Brass Sash Lock is meant for use with double hung style windows.  The base of the latch measures 2-5/8" x 7/8" and the base of the keeper measures 2-1/2" x 5/8".

    Brass Traditional Sash Lock

    Add to cart Details

  • Small Ebonized Wood and Brass Pull

    $ 4.50

    Small Ebonized Wood and Brass Pull

    Small Ebonized Wood and Brass Pull measures 1" in diameter and project 1-1/4". It mounts with a bolt that measures 1-3/8" long and a nut.

    1258-pb

    Add to cart Details

Title

Go to Top