Hardware

Home/Hardware
  • Embossed Kick Bolts

    $ 35.00$ 48.00

    Embossed Kick Bolts

    Embossed kick bolts- available in two sizes and two finishes

    The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows.  We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.

    The small bolts have the following measurements:

      The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

    The large bolts have the following measurements:

    The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

  • Iron Victorian Pull Handle

    The iron Victorian pull handle is made of cast iron and powder coated in a black finish.  The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.

    Iron Pull Handle

  • Medium Iron Fleur De Lis Pulls

    Medium Iron Fleur De Lis Pull measures 5-3/8" long, 1-1/4" wide and 7/8" deep. The screw holes measure 3-1/2" center to center.  They are painted black.

     
  • Rustic Iron Pull Handle

    The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.

    Iron Pull Handle

  • Out of stock

    Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"

    Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Currently available in 3-1/2" x 3-1/2".  Features five knuckles with two ball bearings and three screw holes per side.

  • Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

  • Plated steel hinges- several sizes and colors to choose from

    Plated steel hinges- several sizes and colors to choose from.

    These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:

    3" x 3" in brass or bronze

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter.  This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.

    3-1/2" x 3-1/2" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter.  This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.

    4" x 4" in all finishes

    This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.

  • Brass Casement Sash Latch

    Brass Casement Sash Latch comes with the latch, and three different keepers (one meant for use with a pair of casements which is surface mount and two meant for use with a single casement which mortises into the jamb).

    The latch's back plate measures 2-1/16" tall, 1-5/16" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The first mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb and the second mortised keeper measures 5/8" x 2-3/8" x 1/16".

    brass casement latch

  • Iron Casement Sash Latch

    Iron Casement Sash Latch comes with the latch, and two different keepers (one meant for use with a pair of casements which is surface mount and one meant for use with a single casement which mortises into the jamb).

    The latch's back plate measures 2-1/8" tall, 1-1/4" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb.

    Iron Casement Latch

  • Brass Knuckle Sash Lock

    Brass Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x  3/4". It is made of solid brass.

    Brass Knuckle Sash Lock

  • Iron Knuckle Sash Lock

    Iron Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x  3/4". It is made of cast iron and painted black.

    Iron Knuckle Sash Lock

  • Traditional Brass Sash Lock

    Traditional Brass Sash Lock is meant for use with double hung style windows.  The base of the latch measures 2-5/8" x 7/8" and the base of the keeper measures 2-1/2" x 5/8".

    Brass Traditional Sash Lock

  • Iron Oval Pull

    Iron Oval Pull measures 1-3/4" tall, 1-1/8" wide, and 1-1/2" deep. It mounts with an attached wood screw.

    Oval Pull

  • Small Ebonized Wood and Brass Pull

    Small Ebonized Wood and Brass Pull measures 1" in diameter and project 1-1/4". It mounts with a bolt that measures 1-3/8" long and a nut.

    1258-pb

  • Large Ebonized Wood and Brass Pull

    Large Ebonized Wood and Brass Pull measures 1-1/2" in diameter and project 1-3/8". It mounts with a bolt that measures 1-3/8" long and a nut.

    1268-pb

  • Brass Eastlake Pull

    Brass Eastlake Pull measures 4-1/4" tall, 1-5/8" wide, and 1" deep.

    Eastlake Pull

  • Brass Fleur de Lis Pull

    Brass Fleur de Lis Pull measures 6-1/2" tall, 1-3/8" wide, and 1" deep. The screw holes measure 4-1/2" center to center.

    Brass Fleur De Lis Pull

  • Out of stock

    Embossed Brass Pull

    Embossed Brass Pull measures 6-1/2" tall, 1-1/4" wide, and 1-1/4" deep.

    R-28

  • hand-knockersBrass Victorian Hand Door Knocker

    Brass Victorian Hand Door Knocker measures 2-3/4" wide and 5-1/4" tall overall. The strike plate measures 1-1/4" in diameter.  The knocker and  strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

     

  • fleur-de-lis-door-knocker

    Iron Fleur de Lis Door Knocker

    Iron Fleur de Lis Door Knocker measures 3-7/8" wide and 5-1/4" tall overall. The strike plate measures 1-3/4" in diameter. The knocker and  strike plate attach to your door with machine style bolts, that extend through the rear of your door.

     

     
  • Solid Brass Exterior Meridian Knobs and Plates Set

    Solid Brass Exterior Meridian Door Knobs and Plates Set. Originally patented in 1900 by Yale & Towne Manufacturing the “Meridian” pattern was used in much of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, but can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-3/4″ x 10-7/8″

    The knobs measures 2-1/8″ in diameter and projects 2-5/8″ from the surface of the door

    RA-2001

  • Solid Brass Exterior Lorraine Knobs and Plates Set

    Solid Brass Exterior Lorraine Door Knobs and Plates Set. Originally patented in 1905 by PF Corbin the “Lorraine” pattern was  used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs (one large one for the exterior, and one small one for the interior), a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and is customizable below to suit your needs.

    The plates measure 2-3/4″ x 10-7/8″

    The exterior knob measures 2-1/2″ in diameter and projects 2-1/2" from the surface of the door

    The interior knob measures 2-1/8″ in diameter and projects 2-1/2" from the surface of the door

    R-170

  • Solid Brass Exterior Alby Knobs and Plates Set

    Solid Brass Exterior Alby Door Knobs and Plates Set. Originally patented in 1910 by Sargent the “Alby” pattern was widely used at the end of the Victorian era and well into the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, and can be customized below to suit your needs.

    The plates measure 2-3/4″ x 10-1/2″

    The Knobs are 2-1/8″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA-10.JPG

  • Solid Brass Concentric Knobs and Plates Set

    Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors,  but can be customized below to suit your needs.

    We also have these available in a tarnished metal, although color may vary we have attached a photo of a tarnished set below. These sets were under water during Hurricane Katrina, and are priced lower than our list price.

    The back plates measure 2-1/2″ x 7-9/16″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door

    PA-9.JPG

  • Solid Brass Haven Knobs and Plates Set

    Solid Brass Haven Door Knobs and Plates Set. Originally patented in 1905 by Sargent Hardware Company the “Haven” pattern was used at the end of the Victorian era, as well as through the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, but it can be made into “dummy knobs”(call for price). They do not come with any latch or locking device.

    The plates measure 2-1/4″ x 8-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA8

  • Solid Brass St. Julian Knobs and Plates Set

    Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 8-1/2″

    The Knobs are 2-3/8″ in diameter

    The set projects 2-1/2″ from the face of the door

    RO31b

  • Solid Brass Jerome Knobs and Plates Set

    Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 9-1/8″

    The Knobs are 2-1/4″ in diameter

    The set projects 3″ from the face of the door

    337 A

  • Out of stock

    Solid Brass Broken Leaf Knobs and Plates Set

    Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-1/2″ x 5-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R108

  • Solid Brass Daisy Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-3/4″ x 5-11/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R107

  • Out of stock

    Solid Brass Magnolia Door Knobs and Plates Set

    Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was  used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-5/8″ x 5-3/8″

    The Knobs are 2-3/16″ in diameter

    The set projects 2-1/2″ from the face of the door

    R106

  • Out of stock

    Solid Brass Amarat Door Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.

    The plates measure 1-1/2" x 5-1/2"

    The Knobs are 2-1/4" in diameter

    The set projects 2-1/4" from the face of the door

    R105

  • Clark Tip Right Shutter Hinge

    Clark Tip Right Shutter Hinge. For a face mount application when mortising a hinge is not an option. Right hinges mount on the left side of the window when looking at the window from the exterior. These work well with use on brick homes or homes with wood casing. They are made from cast iron. We suggest you prime and paint these before installation, and screw them in by hand, not with a drill.

    These do not come with screws.

    Portion of hinge that mounts to the face of your casing- 1-1/2" x 2-1/2"

    Portion of hinge that mounts on the face of the shutter- 1-1/2" x 2-1/2"

    Throw provided by hinge when open- 3-1/4"

    clark tip right profile

  • Clark Tip Left Shutter Hinge

    Clark Tip Left Shutter Hinge. For a face mount application when mortising a hinge is not an option. Left Hinges mount on the right side of the window when looking at the window from the exterior. These work well with use on brick homes or homes with wood casing. They are made from cast iron. We suggest you prime and paint these before installation, and screw them in by hand, not with a drill.

    These do not come with screws.

    Portion of hinge that mounts to the face of your casing- 1-1/2" x 2-1/2"

    Portion of hinge that mounts on the face of the shutter- 1-1/2" x 2-1/2"

    Throw provided by hinge when open- 3-1/4"

    Clarke tip left profile

  • Shutter Catches

    Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.

     cincinatti catch

  • 8 Inch Cast Iron Hook and Eye

    8 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7-7/16″

    Overall hook length- 8″

    Back plate size- 1-3/4″ x 1-3/8″  (1-1/4″ deep)

    Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

    8 inch cast iron hook and eye

  • 6 Inch Cast Iron Hook and Eye

    6 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 5-3/8″

    Overall hook length- 6″

    Back plate size- 1-3/4″ x 1-3/8″  (1-1/4″ deep)

    Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

    6 inch cast iron hook and eye

  • 4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing

    4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate-4″

    Overall hook length- 4-1/2″

    Back plate size- 2″ x 1-3/8″  (7/8″ deep)

    Eye size- 2″ x 1-3/8″ (7/8″ deep)

    4 inch cast iron hook and eye diamond back

  • Out of stock

    Solid Brass Exterior Beaded Oval Knobs and Plates Set

    Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 2-7/8″ x 9-3/4″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door

    PA-2

  • Out of stock

    15 Inch Steel Strap Hinge

    15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 15-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    15 inch steel strap hinge

  • Out of stock

    12 Inch Steel Strap Hinge

    12 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 12-1/2" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    12 inch steel Strap hinge

  • 8 Inch Steel Strap Hinge

    8 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 8" long,  1-3/4" wide at widest point, tapers to 1/2" at the end.

    The pintal measures 4-3/4" tall, 1-3/8" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    8 inch steel strap hinge

  • Out of stock

    17 Inch Steel Hook and Eye

    17 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 16″

    Overall hook length- 17″

    Back plate size- 1-1/2″ x 3-1/4″  (1-3/8″ deep)

    Eye size- 1-1/2″ x 3-1/4″ (3/4″ deep)

    17 inch steel hook and eye

  • Out of stock

    15 Inch Steel Hook and Eye

    15 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 14-1/2″

    Overall hook length- 15-1/2″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    15 inch steel hook and eye

  • Out of stock

    15 Inch Steel Hook and Eye

    12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″

    Overall hook length- 12″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    12 inch steel hook and eye

  • Out of stock

    8 Inch Steel Hook and Eye

    8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7″

    Overall hook length- 7-3/4″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    8 inch steel Hook and eye

  • 4 Inch Cast Iron Hook and Eye with Round Backing

    4 Inch Cast Iron Hook and Eye with Round Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 3-1/2"

    Overall hook length- 4"

    Back plate size- 1-3/4" x 1-3/8"  (1-1/4" deep)

    Eye size- 1-3/4" x 1-3/8" (1-1/4" deep)

    4 inch cast iron hook and eye round back

  • Brass Through Shutter Latch

    Brass Through Shutter Latch. These solid brass shutter latches are polished and lacquered to prevent immediate tarnish. They are intended to be mortised through the bottom of the shutter and hook to their keeper mounted on the window sill. When open they connect to a keeper mounted on the exterior of the home. These latches take the place of both dogs and slide bolts. These latches are meant for use on shutters 1-3/8" thick or less.  Each kit includes the latch, a plate for the rear of the shutter, a keeper for the sill, and a keeper for the wall. One kit will do a single shutter, you will need two kits for each window.

    The latch itself (the part that goes through the shutter) measures 2-3/8" at the top and 1-15/16" at the bottom

    The pull (the piece that you would operate) measures-1-1/4" tall and projects out 2" at the most (latch is 1-3/8" from the plate)

    The plate connected to the latch is 2" wide and 1-1/2" tall

    The plate that goes on the rear measures 1-3/8" tall and 1-1/2" wide

    The sill keeper (looks like bottle opener) is 1-3/4" deep and 1" wide

    The wall keeper (L shaped) is 1-1/16" tall, 15/16" wide and projects 1" from the wall

    Brass Through Shutter Latch Kit

  • Out of stock

    17 Inch Steel Strap Hinge

    17 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 17-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    17 inch steel strap hinge

Title

Go to Top