15″ Tall
32″ Wide
12-1/2″ Deep
This planter is made of cast aluminum. The planter comes without a finish, we suggest you paint it.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
Rustic Iron Sconce
The Saint Phillip Street post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
The Saint Phillip Street wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
The Short New York Formal Bench measures 44″ wide at the front, 35″ wide at the rear, 15-1/2″ deep, with a 17" tall seat, and 34-1/2″ tall rear.
The bench is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the bench painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.
Simple Brass Sconce with Original Candle Covers
Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.
Small Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 3-3/4" long and 1-3/8" wide, stands 1-1/4" tall from the surface of the door, and throws 10/16". The keeper measures 7/8" long and 1-1/4" tall.
15" tall
12" in diameter
The urn is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the urn painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
Small Format Pepsi Sign. This Pepsi Cola "More Bounce to the Ounce" sign is approximately 36" wide x 13-3/4" tall and is slightly embossed at the bottle cap. (This listing is only for the Pepsi sign- the Jacques Seeds sign is sold separately)
We have two of these Small Henry Lips Original Stained Glass pieces. They are framed in reclaimed cypress and measure approximately 28" x 51-3/4" x 1-3/8" each. These are signed A Henry Lips 11-1-80 in the corner, please see supplemental image.
The Lips family has been in the stained glass business in New Orleans for many years. Multiple family members create beautiful pieces of art that hang in some of the most affluent homes in the south. Mr. Henry is still in business, handcrafting these beauties.
These two coordinate with three larger pieces we have in a separate listing, and by no means are they small. There are nice complimentary blues and oranges as well as amber and a neutral opaque.
These Items are too large and fragile to ship using UPS therefore we ask you to call 504 488 5524 if you are interested in purchasing them so we may get you a freight quote with a commercial freight company.
Small Iron Fleur de Lis Pull measure 4-1/8" long, 1-1/8" wide, and 7/8" deep. The screw holes measure 2-3/4" center to center. They are painted black.
Small Lion Lavabowl are made from cast aluminum and sold unfinished with some seams bondoed, you will need to paint these to prevent pitting, as well as finish sealing the seams. We cannot ship this item with UPS. Please call us for a freight quote at 504 -488- 5524. The measurements are 7″ deep, 20-1/2″ tall, and 10-3/4″ wide.
Small Plain Oval Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 12″ wide and 6-1/2″ tall. The front measurement is 15-7/8″ wide and 10-1/4″ tall. The vent recesses into the foundation 3″ deep.
Small Rectangular Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 7-7/8″ tall. The front measurement is 15-1/8″ wide and 10-1/8″ tall. The vent recesses into the foundation 3″ deep.
Small Soffit Vent measures 11-5/8" in diameter. They are made of cast aluminum, and sold unfinished. These can be used for venting the attic from your soffit, or look great as a decorative piece on a wooden gate.
Small Victorian Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 8″ tall. The front measurement is 17-3/4″ wide and 12-1/4″ tall. The vent recesses into the foundation 3-1/2″ deep.
Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.
The plates measure 1-1/2" x 5-1/2"
The Knobs are 2-1/4" in diameter
The set projects 2-1/4" from the face of the door
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Currently available in 3-1/2" x 3-1/2". Features five knuckles with two ball bearings and three screw holes per side.
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.
The back plates measure 2-1/4″ x 7″ at their widest points
The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door
