Shop

Home/Shop
  • # 1 1/2 Left Lull and Porter style Shutter Hinge

    # 1 1/2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5-1/8"

    Hinge throw from casing - 3-1/4"

    Hinge Height at mortise- 3"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    one and a half left open rear

  • # 1 1/2 Right Lull and Porter style Shutter Hinge

    # 1 1/2 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 5"

    Hinge throw from casing - 3-1/4"

    Hinge Height at mortise - 2-7/8"

    They do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

    one and a half right open rear

  • Shutter Catches

    Shutter Catches. These typically mount at the bottom of the shutter and latch to the sill of the window. These can only be used when you can open your window and access the rear of your shutters. The set comes with one latch an one catch, you will need two sets for each pair of shutters. Both pieces are made of cast iron. We recommend you prime and paint these before installation and screw them in with a screwdriver by hand, not with a drill. These do not come with screws.

     cincinatti catch

  • Small Ebonized Wood and Brass Pull

    Small Ebonized Wood and Brass Pull measures 1" in diameter and project 1-1/4". It mounts with a bolt that measures 1-3/8" long and a nut.

    1258-pb

  • # 0 Left Lull and Porter style Shutter Hinge

    # 0 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

    Hinge Width when open - 6-7/16"

    Hinge throw from casing - 4-1/8"

    Hinge Height at mortise- 3-1/2"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

    0 left open rear

  • # 0 Right Lull and Porter style Shutter Hinge

    # 0 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

    Hinge Width when open - 6-7/16"

    Hinge throw from casing - 4-1/8"

    Hinge Height at mortise-3-1/2"

    These do not come with screws.

    We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a  drill.

     

    0 right open rear

  • Small Iron Fleur de Lis Pull

    Small Iron Fleur de Lis Pull measure 4-1/8" long, 1-1/8" wide, and 7/8" deep. The screw holes measure 2-3/4" center to center. They are painted black.

    Small Fleur De Lis Pull

  • Iron Pivot Hinge for Transoms

    Iron pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are made of cast iron and left unfinished.

    The pin side has the following measurements:

    Center to center of screw hole 1-1/2"

    Face of Hinge -2-3/8" tall, 7/8" wide, and mortises 1/8" into the face of the transom.

    Side of hinge- 5/8" tall, 7/8" wide, 1/8" thick, center of pin to edge 3/4", pin diameter 3/8", pin length 11/16"

    The receiver side has the following measurements:

    Center to center of screw hole 1-1/8"

    Diameter of center hole 7/16"

    1-11/16" tall, 3/4" wide and 1/8" deep

    Iron Pivot Hinges

  • Large Ebonized Wood and Brass Pull

    Large Ebonized Wood and Brass Pull measures 1-1/2" in diameter and project 1-3/8". It mounts with a bolt that measures 1-3/8" long and a nut.

    1268-pb

  • Iron Oval Pull

    Iron Oval Pull measures 1-3/4" tall, 1-1/8" wide, and 1-1/2" deep. It mounts with an attached wood screw.

    Oval Pull

  • Clark Tip Left Shutter Hinge

    Clark Tip Left Shutter Hinge. For a face mount application when mortising a hinge is not an option. Left Hinges mount on the right side of the window when looking at the window from the exterior. These work well with use on brick homes or homes with wood casing. They are made from cast iron. We suggest you prime and paint these before installation, and screw them in by hand, not with a drill.

    These do not come with screws.

    Portion of hinge that mounts to the face of your casing- 1-1/2" x 2-1/2"

    Portion of hinge that mounts on the face of the shutter- 1-1/2" x 2-1/2"

    Throw provided by hinge when open- 3-1/4"

    Clarke tip left profile

  • Clark Tip Right Shutter Hinge

    Clark Tip Right Shutter Hinge. For a face mount application when mortising a hinge is not an option. Right hinges mount on the left side of the window when looking at the window from the exterior. These work well with use on brick homes or homes with wood casing. They are made from cast iron. We suggest you prime and paint these before installation, and screw them in by hand, not with a drill.

    These do not come with screws.

    Portion of hinge that mounts to the face of your casing- 1-1/2" x 2-1/2"

    Portion of hinge that mounts on the face of the shutter- 1-1/2" x 2-1/2"

    Throw provided by hinge when open- 3-1/4"

    clark tip right profile

  • Medium Iron Fleur De Lis Pulls

    Medium Iron Fleur De Lis Pull measures 5-3/8" long, 1-1/4" wide and 7/8" deep. The screw holes measure 3-1/2" center to center.  They are painted black.

     
  • Iron Window Y

    Iron Window Y's are used when the sash no longer stays up on it's own due to damaged or missing sash weights and balances. They mount to the jamb at about the level you want your window open and with a loose screw will pivot in or out of the way of the sash. The bottom of the sash is held up by the v shaped section, with the short end facing the exterior of the home.

    The Y measures 2-5/8" long, 2" at it's widest point, and 1/4" thick. It is made of cast iron and painted white.

    window y

  • Small Brass Bin Pull

    Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.

    1135-pb

  • Large Iron Fleur de Lis Pull

    Large Iron Fleur de Lis Pull measures 7-1/4" tall, 1-1/2" wide, and 1-1/2" deep. The screw holes measure 5-5/16" center to center. They are painted black.

    Medium Fleur De Lis Pull

  • Oval Iron Bin Pull

    Oval Iron Bin Pull measures 3-3/8" wide, 1-3/8" tall, and 3/4" deep. The screw holes measure 2-7/8" center to center. They are painted black.

    9139

  • Medium Brass Bin Pull

    Medium Brass Bin Pull measures 3-1/2" wide, 1" tall, and 5/8" deep. The screw holes measure 3" center to center.

    1136-PB

  • Brass Pivot Hinge for Transoms

    Brass pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are solid Brass with a lacquered finish.

    The pin side has the following measurements:

    Center to center of screw hole 1-1/8″

    Face of Hinge -2-3/8″ tall, 1″ wide, and mortises 1/8″ into the face of the transom.

    Side of hinge- 3/4″ tall, 1- 1/16″ wide, 3/16″ thick, center of pin to edge 7/8″, pin diameter 7/16″, pin length 15/16″

    The receiver side has the following measurements:

    Center to center of screw hole 1-1/4″

    Diameter of center hole 3/8″

    1-15/16″ tall, 7/8″ wide and 1/4″ deep

    Brass Pivot Hinge

  • Extra Large Brass Bin Pull

    Extra Large Brass Bin Pull measure 3-3/8" wide, 1-1/4" tall, and 5/8" deep. The screw holes are 2-7/8" center to center.

    1134-PB

  • Large Iron Fleur de Lis Pull

    Large Iron Fleur de Lis Pull measures 9" tall, 1-5/8" wide, and 1-7/8" deep. The screw holes measure 7-5/8" center to center. They are painted black.

    Large Fleur De Lis Pull

  • Iron Rectangular Bin Pull

    Iron Rectangular Bin Pull measures 3-1/2" wide, 1-1/2" tall, and 3-4" deep. The screw holes measure 2-7/8" center to center. They are painted black.

    9141

  • Iron Ornate Fleur de Lis Bin Pull

    Iron Ornate Fleur de Lis Bin Pull measures 4-1/4" wide, 1-1/2" tall, and 3/4" deep. The screw holes measure 2-3/4" center to center. They are painted black.

    9140

  • Iron Spanish Rose Bin Pull

    Iron Spanish Rose Bin Pull measure 4-1/8" wide, 1-5/8" tall, and 1-1/16" deep. The screw holes measure 3-3/8" center to center. They are painted black.

    9138

Title

Go to Top