Brass

Out of stock

Solid Brass Exterior Beaded Oval Knobs and Plates Set

$ 95.00

Solid Brass Exterior Beaded Oval Knobs and Plates Set

Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.

The back plates measure 2-7/8″ x 9-3/4″ at their widest points

The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door

Details
Brass Through Shutter Latch

$ 21.50

Brass Through Shutter Latch

Brass Through Shutter Latch. These solid brass shutter latches are polished and lacquered to prevent immediate tarnish. They are intended to be mortised through the bottom of the shutter and hook to their keeper mounted on the window sill. When open they connect to a keeper mounted on the exterior of the home. These latches take the place of both dogs and slide bolts. These latches are meant for use on shutters 1-3/8" thick or less. Each kit includes the latch, a plate for the rear of the shutter, a keeper for the sill, and a keeper for the wall. One kit will do a single shutter, you will need two kits for each window.

The latch itself (the part that goes through the shutter) measures 2-3/8" at the top and 1-15/16" at the bottom

The pull (the piece that you would operate) measures-1-1/4" tall and projects out 2" at the most (latch is 1-3/8" from the plate)

The plate connected to the latch is 2" wide and 1-1/2" tall

The plate that goes on the rear measures 1-3/8" tall and 1-1/2" wide

The sill keeper (looks like bottle opener) is 1-3/4" deep and 1" wide

The wall keeper (L shaped) is 1-1/16" tall, 15/16" wide and projects 1" from the wall

Add to cart Details
Brass Casement Stay

$ 35.00

Brass Casement Stay

Brass Casement Stay is made to secure casement windows in either a closed or open position. The Maximum throw is 10-1/2". These are meant for use in an outswing application only.

Add to cart Details
Out of stock

Brass Oval Beaded Sash Lift

$ 10.50

Brass Oval Beaded Sash Lift

Brass Oval Beaded Sash Lift measures 4" x 2" and mortises into the sash 3/8" deep at 2-3/4" x 1-1/4".

Details
Brass Victorian Sash Lift

$ 12.00

Brass Victorian Sash Lift

Brass Victorian Sash Lift measures 5-1/4" x 1-3/4" and mortises 3/8" deep at 2-3/4" x 1-1/8".

Add to cart Details
Brass Sash Pulley

$ 20.00

Brass Sash Pulley

Brass Sash Pulley measures 4-3/4″ x 1-1/4″ at the face, it mortises 2-1/4″ deep into the jamb of the window.

Add to cart Details
Brass Embossed Sash Lock

$ 14.50

Brass Embossed Sash Lock

Brass Embossed Sash Lock can be used either with casement or double hung windows. With double hung sashes the moving part of the latch would mount to the bottom sash and the keeper would mount to the top sash. The back plate of the keeper measures 2-3/8" x 7/8" and is a total of 3/4" tall. The back plate of the moving part of the latch measures 2-3/8" x 1-1/8". The arm measures 3-1/4" x 1".

Add to cart Details
Brass Pivot Hinge For Transoms

$ 7.65

Brass Pivot Hinge for Transoms

Brass pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are solid Brass with a lacquered finish.

The pin side has the following measurements:

Center to center of screw hole 1-1/8″

Face of Hinge -2-3/8″ tall, 1″ wide, and mortises 1/8″ into the face of the transom.

Side of hinge- 3/4″ tall, 1- 1/16″ wide, 3/16″ thick, center of pin to edge 7/8″, pin diameter 7/16″, pin length 15/16″

The receiver side has the following measurements:

Center to center of screw hole 1-1/4″

Diameter of center hole 3/8″

1-15/16″ tall, 7/8″ wide and 1/4″ deep

Add to cart Details
Brass Transom Latch

$ 21.00

Brass Transom Latch

Brass Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of solid brass.

Add to cart Details
Solid Brass Knob and Lever Set with Rosettes

$ 41.00

Solid Brass Knob and Lever Set With Rosettes

Solid Brass Knob and Lever Set with Rosettes. This set mimics screen door and small French door knob and lever sets found in New Orleans. The set comes with one knob, one lever, one circular rosette, one oval rosette, a shaft that connects the knob to the lever with set screws, and two set screws. This set will not work on predrilled doors, nor can it be made into "dummy knobs". It does not come with any latching or locking device.

The knob measures 1-3/4" in diameter and rises 2-1/8" from the surface of the door

The lever measures 3" long 7/8" in diameter at shank and rises 2-1/2" from the surface of the door

The round rosette measures 1-3/4" in diameter

The oval rosette measures 1-3/4" x 1-3/8"

Add to cart Details
Out of stock

Solid Brass Gothic Knobs and Plates Set

$ 45.00

Solid Brass Gothic Knobs and Plates Set

Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.

The back plates measure 1-5/8″ x 6-1/8″ at their widest points

The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door

Details
Out of stock

Solid Brass Beaded Oval Knobs and Plates Set

$ 45.00

Solid Brass Beaded Oval Knobs and Plates Set

Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.

The back plates measure 2-1/4″ x 7″ at their widest points

The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door

Details
Brass Ball Top Hinges 4-1/2″ x 5″

$ 100.00

Brass Ball Top Hinges 4-1/2" x 5"

Brass Ball Top Hinges 4-1/2" x 5" includes two hinges with removable pins.

Add to cart Details
Brass Ball Top Hinges 6″ x 6″

$ 150.00

Brass Ball Top Hinges 6" x 6"

Brass Ball Top Hinges 6" x 6" include two hinges with removable pins.

Add to cart Details
Three Inch Steeple Top Embossed Brass Hinges

$ 38.00

Three Inch Steeple Top Embossed Brass Hinges

Three Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

Add to cart Details
Out of stock

Three and a Half Inch Steeple Top Embossed Brass Hinges

$ 38.00

Three and a Half Inch Steeple Top Embossed Brass Hinges

Three and a Half Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

Details
Four Inch Steeple Top Embossed Brass Hinges

$ 48.00

Four Inch Steeple Top Embossed Brass Hinges

Four Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

Add to cart Details
Small Brass Door Bolt

$ 12.00

Small Brass Door Bolt

Small Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 3-3/4" long and 1-3/8" wide, stands 1-1/4" tall from the surface of the door, and throws 10/16". The keeper measures 7/8" long and 1-1/4" tall.

Add to cart Details
Medium Brass Door Bolt

$ 15.00

Medium Brass Door Bolt

Medium Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 4-1/2″ long and 1-1/4″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-1/4″. The keeper measures 1-1/4″ long and 1-1/2″ tall.

Add to cart Details
Large Brass Door Bolt

$ 18.00

Large Brass Door Bolt

Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and 1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″. The keeper measures 1-1/4″ long and 1-1/2″ tall.

Add to cart Details
Brass Flush Bolt

$ 12.00

Brass Flush Bolt

Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and 1-3/8" wide.

Add to cart Details
26 Inch Brass Head Bolt

$ 55.00

Add to cart Details
20 Inch Brass Head Bolt

$ 48.00

Add to cart Details
9 Inch Brass Foot Bolt

$ 45.00

Add to cart Details

Title