Shop

You cannot add "Spanish Cast Brass 6 arm Chandelier" to the cart because the product is out of stock.

Out of stock

Spanish Cast Brass 6 arm Chandelier

$ 850.00

Spanish Cast Brass 6 arm Chandelier

This Spanish Cast Brass 6 arm Chandelier is rewired and ready to hang. It features six brass arms with crystal baubaches wired for standard base lamps (no greater than 40 watts each). It is marked at the top with the made in Spain logo. It was probably manufactured between 1950 and 1965. It has crystal tear drops which refract the light perfectly.

The measurements are as follows:

24″ wide

23″ tall body with crystal

39″ of chain and canopy

The bottom of this chandelier would hang 62″ from the ceiling, perfect for 11′ or 12' ceilings.

This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!

Details
Out of stock

Stained Glass Pocket Doors-SOLD

Stained Glass Pocket Doors- SOLD

This amazing pair of Stained Glass Pocket Doors measures a massive 10 feet wide by 11 feet tall (image shows one door). The glass features German bottle bottom pieces, with a very large one in the center at the top, and two beautiful shades of blue textured glass. There are three panels at the bottom of each door, each panel is raised with an applied molding surrounding them. These are massive. The photos do not do them justice in any way. They could be used as standard swinging doors, in either an interior or exterior application. Please call 504 488 5524 if you are interested in getting a shipping quote.

Details
Out of stock

T Panel Antique Interior Doors

$ 200.00 – $ 450.00

T Panel Interior Doors

T Panel Interior Doors come in three varieties:

Flat Panel with Shaker Profile Doors- Traditionally have flat panels (either plywood or cypress) with a square profile on the stiles and rails.

Flat T Panel With Shaker Profile

Flat Panel with Shaped Profile Doors- These are the most common of the T panel doors, panels are flat (either plywood or cypress) with a shaped profile on the stiles and rails.

Raised Panel Doors- The least common of the T panel styles, has cypress raised panels.

Raised T Panel

Antique T panel doors come in widths from 28″ wide to 34″ wide, although we do have some others in odd widths. The height starts around 76″, and up to 84″ normally we do have some in odd heights. The thickness ranges from 1″ to 1-1/2″.

Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.

Details
Out of stock

The Baton Rouge Line

$ 375.00 – $ 650.00

The Baton Rouge Line

The Baton Rouge Line Door combines clean lines with classic style. These doors are made from Mahogany with engineered stiles. We manufacture them with two different glass lengths in multiple sizes. The glass is clear, flat, and tempered; a single sheet of 1/4 inch glass. These are sold in a 7' height but can be trimmed to 78" tall in height if desired. These doors are sold as slabs only- no jambs included, and are unfinished and un- bored. Please call to get a freight quote before ordering, the price below does not include shipping.

The first glass length is 48" with a shorter panel.

These are available in the following sizes:

36" x 84" x 1-3/4"

34" x 84" x 1-3/4"

32" x 84" x 1-3/4"

30" x 84" x 1-3/4"

18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients

The second glass length is 36" with a panel almost halfway up the door

These are available in the following sizes: 36" x 84" x 1-3/4"

34" x 84" x 1-3/4"

18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients

Details
Out of stock

Victorian style Stained Glass Window

$ 4,500.00

Victorian style Stained Glass Window

Victorian style Stained Glass Window. This window measures 3' wide by 4' tall including the frame. It is framed in Mahogany. It includes Flemish glass, beveled glass, Kokomo glass (in several shades of blue, green, yellows, and oranges), textured glass (in amber and violet),and some ruby glass jewels. The caming is zinc. This piece has been reinforced on the rear of the piece. It is truly spectacular in person! This item is too fragile and large to ship using UPS, therefore we are not selling them directly through the website. Please call us at 504 488 5524 and we would be happy to get you a quote for commercial freight.

Details
Solid Brass Ball Bearing Hinges – steeple finial in multiple sizes

$ 38.00 – $ 48.00

Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

Select options Details
Plated steel hinges- several sizes and colors to choose from

$ 30.00 – $ 45.00

Plated steel hinges- several sizes and colors to choose from

Plated steel hinges- several sizes and colors to choose from.

These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:

3" x 3" in brass or bronze

This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.

3-1/2" x 3-1/2" in all finishes

This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.

4" x 4" in all finishes

This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.

Select options Details
Out of stock

Antique Stewart Iron Works Wrought Iron Gate

$ 450.00

Antique Stewart Iron Works Wrought Iron Gate

Antique Stewart Iron Works Wrought Iron Gate

This gate, manufactured in Cincinnati, Ohio by the Stewart Ironworks Company, measures 37" wide with the mounting hardware and primitive latch, or 31-1/2" wide as just the gate. It measures 52" tall at the center, and 42" tall at the sides. It needs a weld at the bottom right corner, the top finial is slightly bent, and may need some bondo work at the top left, but is otherwise in great shape for its age. There is a great makers plaque at the center, pictured in the gallery of images. The primitive latch is still functioning. The gate comes with the portion of the hinge that bolts to your fence post and the rod that attaches your gate to the hinge. The iron details on this gate are exquisite. Please call for a shipping quote if you are interested in this gate as we cannot ship it using UPS.

Details
Out of stock

10 Arm Crystal Chandelier

$ 2,200.00

10 Arm Crystal Chandelier

This Czech Crystal (30% leaded) chandelier features 10 arms and is absolutely loaded with prisms. It dates back to the 1930's and was recently rebuilt and rewired. This one is a stunner! We cannot ship this product UPS , please call for a freight quote!

Details
Out of stock

3 Foot Gate

$ 179.60

3 Foot Gate

Our 3 foot gate is made from flat steel, hollow steel, and cast iron components. The gate comes with two hollow steel posts, with lift off style hinges included. With each gate you get to choose your finial style- either the spear finial (which matches our loop and spear fencing), or the Fleur de Lis finial. An image of each finial can be seen in the image gallery above. We do not always have these in stock, but we would be happy to order either style for you. If you are coordinating these with our loop and spear fencing, the 3 foot gate looks best with the 2 foot or the 3 foot tall fencing.

The measurements are as follows (measurements may vary slightly as this is a handmade product)

Gate width without hinges: 36"

Gate height at center- including finials: 36-1/4"

Gate height at sides: 30-1/4"

Post dimensions: 2" x 2"

MINIMUM Opening measurement required for installation: 41-1/2"

Details
Garden District Summerfront

$ 215.00

Garden District Summerfront

Garden District summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick (or with this style, the face of a cast iron or stone mantle), and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.

The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)

Outer width 26-3/8"

Outer height 29-5/8" at center

Inner width 18-1/4"

Inner height 25-3/4" at center

Add to cart Details
Out of stock

Number 16 Summerfront

$ 150.00

Number 16 Summerfront

Number 16 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.

The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)

Outer width 23-1/4"

Outer height 27"

Inner width 16"

Inner height at center 23-1/2"

Details
Out of stock

Number 14 Summerfront

$ 150.00

Number 14 Summerfront

Number 14 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.

Details
Out of stock

Custom Entry Door

Custom Entry Door

This custom entry door measures 36" x 96" x 1-3/4" and is made of salvaged cypress lumber from New Orleans. The door does not contain glass, but we would be happy to get you a quote for glass installation. This door was made to replicate the Creole style cottage doors that are present throughout New Orleans. Not the correct size for you? Call us with your size and we would be happy to get you a quote for a different size.

Details
Out of stock

Custom Bathroom Vanity

$ 800.00

Custom Bathroom Vanity

This custom bathroom vanity was created using antique cypress lumber salvaged from homes in New Orleans. Not too often do you find a cabinet that is ONLY made of solid wood (without any plywood or composites). Quality in craftsmanship and materials are our goals whenever we produce anything for your home. Please give us a call today to discuss any custom items you may need.

Details
Out of stock

Custom Door with Stained Glass

Custom Door with Stained Glass

This door was created for a client who wanted a unique door for his pantry. The door is made from an antique stained glass window and Pecky Cypress pulled from a bayou in southeast Louisiana. The door was designed so that the stained glass window could be opened. We have tons of antique and vintage stained glass panels in stock and would be happy to sit down and discuss a custom door for you.

Details
Out of stock

Custom Gable Window Unit

$ 625.00

Custom Gable Window Unit

This custom unit includes sash, jamb, exterior casing with top drip ledge, shutters, and Clarke Tip shutter hinges. The unit is completely made of antique cypress lumber salvaged from southeast Louisiana (with the exception of the cast iron hinges of course). The jamb measures 26-3/8" x 34-1/8" x 3-1/2". No glass is included, but we would be happy to price some glass installed for you.

Details
Out of stock

Custom Modern Door To Match Another

Custom Modern Door To Match Another

Yes, sometimes we do carry modern style doors! In this case it was a one of a kind entry door with mid century styling. The dilemma: The client interested in the door needed a pair of doors. We accommodated her needs by creating a second door out of cypress to match the first. In mast cases we can replicate items as closely as possible. We do not like saying no very much!

Details
Out of stock

Custom Victorian Cottage Door

Custom Victorian Cottage Door

Sometimes clients come in and need to match an existing item as exactly as possible. This client's front door was destroyed when a contractor had the paint removed improperly. Being that the house sat on one of the historic, Oak tree lined main streets here in New Orleans; and combined with the fact that the door was an odd size; this door could not be replaced with something off of the shelf. We created this beauty using the client's original Leaded Glass insert- which had to be completely rebuilt- Brazilian Mahogany, and antique cypress for the applique. This door was not inexpensive, but we can work within your budget in most cases and create something unique for your property. Please contact us for any of your replacement needs.

Details
Out of stock

Custom Hall Tree

$ 475.00

Custom Hall Tree

This custom Hall Tree was created using an old door, some mirror, antique hardware and Pecky Cypress. It has since been sold, but another similar one can be created for you. Please call the shop or come in and we would be happy to discuss creating a custom item for your home.

Details
Out of stock

Large Alligator

$ 550.00

Details
Out of stock

Medium Alligator

$ 159.00

Details
Out of stock

Small Alligator

$ 149.00

Details
Out of stock

Rural Mailbox

$ 198.00

Rural Mailbox

47″ tall

19-1/4″ deep

10" wide

This mailbox is made of cast aluminum. The mailbox comes without a finish, we suggest you paint it. This mailbox does not lock.

We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

Details

Title