(504) 488-5524 or (504) 822-8200|riccaarch@yahoo.com
FacebookYouTube

Shop

Home/Shop
  • Out of stock

    The Baton Rouge Line

    $ 375.00 – $ 650.00

    The Baton Rouge Line

    The Baton Rouge Line Door combines clean lines with classic style. These doors are made from Mahogany with engineered stiles. We manufacture them with two different glass lengths in multiple sizes. The glass is clear, flat, and tempered; a single sheet of 1/4 inch glass. These are sold in a 7' height but can be trimmed to 78" tall in height if desired. These doors are sold as slabs only- no jambs included, and are unfinished and un- bored. Please call to get a freight quote before ordering, the price below does not include shipping.

    The first glass length is 48" with a shorter panel.

    These are available in the following sizes:

    36" x 84" x 1-3/4"

    34" x 84" x 1-3/4"

    32" x 84" x 1-3/4"

    30" x 84" x 1-3/4"

    18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients

    The second glass length is 36" with a panel almost halfway up the door

    These are available in the following sizes: 36" x 84" x 1-3/4"

    34"  x 84" x 1-3/4"

    18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients

    Details
  • Out of stock

    Four Panel Door in Mahogany

    $ 265.00 – $ 390.00

    Four Panel Door in Mahogany

    Four Panel Door in Mahogany. These doors come in 7' or 8' tall. The 8' doors can be trimmed to 7'5" tall. The 7' doors can be trimmed to 6'7" tall. The widths range from 18" wide to 36" wide in each height. The thickness of these doors is 1-3/8". These doors are sold as unfinished slabs, without bores or mortises. They do not come prehung or pre finished. They are stain grade, but can be painted if desired. The stiles of the doors are engineered mahogany to prevent warping and checking. There is a 1/4" Mahogany veneer on the stiles and rails, the panels are solid Mahogany. The images show the doors installed with a finish, they do not come pre finished. These items are too large to ship using UPS, therefore we do not sell them directly through the website. If you are interested in purchasing these please call us at 504 488 5524 and we would be happy to get you a quote for shipping through commercial freight line.

    Details

  • Iron Window Y

    $ 6.75

    Iron Window Y

    Iron Window Y's are used when the sash no longer stays up on it's own due to damaged or missing sash weights and balances. They mount to the jamb at about the level you want your window open and with a loose screw will pivot in or out of the way of the sash. The bottom of the sash is held up by the v shaped section, with the short end facing the exterior of the home.

    The Y measures 2-5/8" long, 2" at it's widest point, and 1/4" thick. It is made of cast iron and painted white.

    window y

    Add to cart Details
  • Out of stock

    16 Inch Iron Head Bolt

    $ 38.00

    16 Inch Iron Head Bolt

    16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    16 inch iron head bolt

    Details
  • Out of stock

    9 Light Marginal Doors

    $ 370.00 – $ 850.00

    9 Light Marginal Doors

    9 Light marginal doors- Available in both 6'8" and 8'0" heights. These doors are made of Mahogany and feature beveled, tempered glass. These are sold as slabs only and do not come prehung. It is important to note that if you are ordering pairs of sidelights - each listing is for a single slab, so you will need to order two slabs to make a pair.

    The following sizes are available:

    36" x 80" x 1-3/4" (Currently out of stock)

    32" x 80" x 1-3/4"

    30" x 80" x 1-3/4"

    18" x 80" x 1-3/4" (6 light sidelight- see photos)

    14" x 80" x 1-3/4" (3 light sidelight- see photos)

    36" x 96" x 1-3/4"

    32" x 96" x 1-3/4"

    18" x 96" x 1-3/4" (6 light sidelight)

     

    36" door with 14" sidelights

    30" doors with 18" sidelights

    36" x 80" door

    Details

  • Solid Brass Ball Bearing Hinges – steeple finial in multiple sizes

    $ 38.00 – $ 48.00

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes

    These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.

    Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.

    Select options Details
  • Out of stock

    French Oval Planter

    $ 145.00

    French Oval Planter

    11-1/4″ Tall

    25-1/2″ Wide

    13″ Deep

    This planter is made of cast aluminum. The planter comes without a finish, we suggest you paint it.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    French Oval Planter

    Details
  • Out of stock

    Brushed Nickel Ritz Sconce

    $ 45.00

    Brushed Nickel Ritz Sconce

    Brushed Nickel Ritz Sconce

     
    Details
  • Out of stock

    15 Inch Steel Strap Hinge

    $ 20.00

    15 Inch Steel Strap Hinge

    15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 15-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    15 inch steel strap hinge

    Details
  • Out of stock

    12 Inch Steel Hook and Eye

    $ 20.00

    15 Inch Steel Hook and Eye

    12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″

    Overall hook length- 12″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    12 inch steel hook and eye

    Details

  • Brass Embossed Sash Lock

    $ 14.50

    Brass Embossed Sash Lock

    Brass Embossed Sash Lock can be used either with casement or double hung windows. With double hung sashes the moving part of the latch would mount to the bottom sash and the keeper would mount to the top sash.  The back plate of the keeper measures 2-3/8" x 7/8" and is a total of 3/4" tall. The back plate of the moving part of the latch measures 2-3/8" x 1-1/8". The arm measures 3-1/4" x 1".

    Brass Embossed Sash Lock

    Add to cart Details

  • Iron Transom Latch

    $ 18.00

    Iron Transom Latch

    Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.

    Iron transom Latch

    Add to cart Details

  • Iron Parliament Hinge with Five and Three Quarter Inch Offset

    $ 9.75

    Iron Parliament Hinge with Five and Three Quarter Inch Offset

    Iron Parliament Hinge with Five and Three Quarter Inch Offset measures a total of 7-7/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1-1/16″ x 2-7/8″ and has a throw of 5-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

    seven and seven eigths inch parlament hinge

    Add to cart Details

  • Embossed Ball Top Iron Hinges 4″ x 4″

    $ 24.00

    Embossed Ball Top Iron Hinges 4" x 4"

    Embossed Ball Top Iron Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.

    four by four embossed ball top open

    four by four embossed ball top closed

    Add to cart Details

  • Medium Brass Door Bolt

    $ 15.00

    Medium Brass Door Bolt

    Medium Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 4-1/2″ long and  1-1/4″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-1/4″.  The keeper measures 1-1/4″ long and 1-1/2″ tall.

    Medium Brass Door Bolt

    Add to cart Details

  • Brass Flush Bolt

    $ 12.00

    Brass Flush Bolt

    Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and  1-3/8" wide.

      Brass Flush Bolt

    Add to cart Details
  • 26 inch head bolt

    26 Inch Brass Head Bolt

    $ 55.00
    Add to cart Details
  • Iron Pull Handle

    Iron Victorian Pull Handle

    $ 85.00

    Iron Victorian Pull Handle

    The iron Victorian pull handle is made of cast iron and powder coated in a black finish.  The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.

    Iron Pull Handle

    Add to cart Details
  • Out of stock

    T Panel Antique Interior Doors

    $ 200.00 – $ 450.00

    T Panel Interior Doors

    T Panel Interior Doors come in three varieties:

    Flat Panel with Shaker Profile Doors- Traditionally have flat panels (either plywood or cypress) with a square profile on the stiles and rails.

    Flat T Panel With Shaker Profile

    Flat Panel with Shaped Profile Doors- These are the most common of the T panel doors, panels are flat (either plywood or cypress) with a shaped profile on the stiles and rails.

    Raised Panel Doors- The least common of the T panel styles, has cypress raised panels.

    Raised T Panel

    Antique T panel doors come in widths from 28″ wide to 34″ wide, although we do have some others in odd widths. The height starts around 76″, and up to 84″ normally we do have some in odd heights. The thickness ranges from 1″ to 1-1/2″.

    Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.

    Details
  • Out of stock

    Fleur de Lis Country Club Mailbox

    $ 245.00

    Fleur de Lis Country Club Mailbox

    57-1/2″ tall

    21″ deep

    8″ wide

    This mailbox is made of cast aluminum. The mailbox comes without a finish, we suggest you paint it. This mailbox does not lock.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    Fleur de Lis Mailbox

    Details

  • Solid Brass Jerome Knobs and Plates Set

    $ 63.00

    Solid Brass Jerome Knobs and Plates Set

    Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 9-1/8″

    The Knobs are 2-1/4″ in diameter

    The set projects 3″ from the face of the door

    337 A

    Add to cart Details
  • Out of stock

    8 Inch Steel Hook and Eye

    $ 15.00

    8 Inch Steel Hook and Eye

    8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7″

    Overall hook length- 7-3/4″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    8 inch steel Hook and eye

    Details

  • Iron Casement Stay

    $ 25.00

    Iron Casement Stay

    Iron Casement Stay is made to secure casement windows in either a closed or open position. The Maximum throw is 10-1/2". These are meant for use in an outswing application only.

    iron casement stay

    Add to cart Details

  • Iron Beaded Oval Knobs and Plates Set

    $ 38.00

    Iron Beaded Oval Knobs and Plates Set

    Iron Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of iron and powder coated in a matte black finish. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into "dummy knobs" (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-3/8" x 7" at their widest points

    The knobs measure 1-3/4" x 2-3/4" at their widest points and rise 2-3/4" from the surface of the door

    VB1197I

    Add to cart Details

Title

Go to Top