Door Hardware

Bolts, latches, locks, hinges, accessories and handles

Out of stock

16 Inch Iron Head Bolt

$ 38.00

16 Inch Iron Head Bolt

16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

Details
20 Inch Brass Head Bolt

$ 48.00

Add to cart Details
26 Inch Brass Head Bolt

$ 55.00

Add to cart Details
28 Inch Iron Head Bolt

$ 45.00

28 Inch Iron Head Bolt

28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

Add to cart Details
Out of stock

8 Inch Iron Foot Bolt

$ 35.00

8 Inch Iron Foot Bolt

8 Inch Iron Foot Bolt is most often used on a double door application and secures the stationary door at the bottom, it is highly recommended for use with a head bolt (or top bolt) to prevent warping. The bolt measures 9-1/4″ tall and the rear plate measures 1-7/8″ wide by 5-1/2″ tall. The bolt tongue measures 1-1/16″ when activated, and is 3/4″ wide. The bolt comes with two different keepers, one used when the threshold extends well past the door and can be mortised into, and one used when the threshold does not extend much past the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down with your hand, never forward away from the surface of the door, or operated with your foot (this action would put stress on the weld that attaches the arm to the bolt).

Details
9 Inch Brass Foot Bolt

$ 45.00

Add to cart Details
Ball Top Plain Iron Hinges 3-1/2″ x 3-1/2″

$ 20.00

Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"

Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"- sold as a pair of two hinges (one hinge shown in images). These hinges are made of steel and painted gloss black. The pin is removable for ease of hanging.

Add to cart Details
Brass Acanthus Door Bell

$ 38.00

Brass Acanthus Door Bell

Brass Acanthus Door Bell measures 2-7/8" wide and 6-1/4" tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.

Add to cart Details
Brass Ball Top Hinges 4-1/2″ x 5″

$ 100.00

Brass Ball Top Hinges 4-1/2" x 5"

Brass Ball Top Hinges 4-1/2" x 5" includes two hinges with removable pins.

Add to cart Details
Brass Ball Top Hinges 6″ x 6″

$ 150.00

Brass Ball Top Hinges 6" x 6"

Brass Ball Top Hinges 6" x 6" include two hinges with removable pins.

Add to cart Details
Brass Eastlake Door Bell

$ 38.00

Brass Eastlake Door Bell

Brass Eastlake Door Bell measures 2-1/4″ wide and 6-3/8″ tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.

Add to cart Details
Brass Flush Bolt

$ 12.00

Brass Flush Bolt

Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and 1-3/8" wide.

Add to cart Details
Out of stock

Brass Lion Door Knocker

$ 28.00

Brass Lion Door Knocker

Brass Lion Door Knocker's back plate measures 3-1/4" wide and 4-1/4" tall, the overall height is 6". The strike plate measures 1-3/8" in diameter. The knocker and strike plate attach to your door with machine style bolts, that extend through the rear of your door.

Details
Brass Victorian Hand Door Knocker

$ 28.00

Brass Victorian Hand Door Knocker

Brass Victorian Hand Door Knocker measures 2-3/4" wide and 5-1/4" tall overall. The strike plate measures 1-1/4" in diameter. The knocker and strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

Add to cart Details
Out of stock

Embossed Ball Top Hinges 4-1/4″ x 4-7/8″

$ 45.00

Embossed Ball Top Hinges 4-1/4" x 4-7/8"

Embossed Ball Top Hinges 4-1/4" x 4-7/8" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge, the spine of the hinge, and on both finials. The pattern of the embossing is in a floral Victorian style.

Details
Embossed Ball Top Iron Hinges 4″ x 4″

$ 24.00

Embossed Ball Top Iron Hinges 4" x 4"

Embossed Ball Top Iron Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.

Add to cart Details
Embossed Iron Steeple Top Hinges 4″ x 4″

$ 24.00

Embossed Iron Steeple Top Hinges 4" x 4"

Embossed Iron Steeple Top Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.

Add to cart Details
Embossed Kick Bolts

$ 35.00 – $ 48.00

Embossed Kick Bolts

Embossed kick bolts- available in two sizes and two finishes

The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows. We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.

The small bolts have the following measurements:

The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

The large bolts have the following measurements:

The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.

Select options Details
Embossed Steeple Top Hinges 3-1/2″ x 3-1/2″

$ 20.00

Embossed Steeple Top Hinges 3-1/2" x 3-1/2"

Embossed Iron Steeple Top Hinges 3-1/2″ x 3-1/2″ are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge. The pattern of the embossing is in a floral Victorian style.

Add to cart Details
Four Inch Steeple Top Embossed Brass Hinges

$ 48.00

Four Inch Steeple Top Embossed Brass Hinges

Four Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

Add to cart Details
Iron Bat Door Knocker

$ 28.00

Iron Bat Door Knocker

Iron Bat door Knocker measures 2-3/4" wide, 9-1/8" tall and projects 1-5/8" from the surface of your door. It attaches to your door with two wood screws. This knocker is a replica of a knocker from one of Mr. Ricca's properties on the corner of Burgundy and Governor Nicholls streets.

Add to cart Details
Iron Beaded Oval Knobs and Plates Set

$ 38.00

Iron Beaded Oval Knobs and Plates Set

Iron Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of iron and powder coated in a matte black finish. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into "dummy knobs" (call for price). This set does not come with any locking or latching device.

The back plates measure 2-3/8" x 7" at their widest points

The knobs measure 1-3/4" x 2-3/4" at their widest points and rise 2-3/4" from the surface of the door

Add to cart Details
Iron Fleur de Lis Door Knocker

$ 22.00

Iron Fleur de Lis Door Knocker

Iron Fleur de Lis Door Knocker measures 3-7/8" wide and 5-1/4" tall overall. The strike plate measures 1-3/4" in diameter. The knocker and strike plate attach to your door with machine style bolts, that extend through the rear of your door.

Add to cart Details
Iron Lion Door Knocker

$ 22.00

Iron Lion Door Knocker

Iron Lion Door Knocker back plate measures 3-5/8" wide and 4-1/4" tall. The overall height is 5-7/8". The strike plate is 1-3/4" in diameter. The knocker and strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

Add to cart Details

Title