Hardware

Brass Casement Sash Latch

$ 20.00

Brass Casement Sash Latch

Brass Casement Sash Latch comes with the latch, and three different keepers (one meant for use with a pair of casements which is surface mount and two meant for use with a single casement which mortises into the jamb).

The latch's back plate measures 2-1/16" tall, 1-5/16" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The first mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb and the second mortised keeper measures 5/8" x 2-3/8" x 1/16".

Add to cart Details
Out of stock

15 Inch Steel Strap Hinge

$ 20.00

15 Inch Steel Strap Hinge

15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

The exact measurements of the hinge itself are 15-1/4" long, 1-1/2" wide at widest point, tapers to 3/4" at the end.

The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

Details
Out of stock

12 Inch Steel Strap Hinge

$ 20.00

12 Inch Steel Strap Hinge

12 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

The exact measurements of the hinge itself are 12-1/2" long, 1-1/2" wide at widest point, tapers to 3/4" at the end.

The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

Details
Out of stock

17 Inch Steel Hook and Eye

$ 20.00

17 Inch Steel Hook and Eye

17 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

Hook length from center of hook to center of hole that attaches hook to the back plate- 16″

Overall hook length- 17″

Back plate size- 1-1/2″ x 3-1/4″ (1-3/8″ deep)

Eye size- 1-1/2″ x 3-1/4″ (3/4″ deep)

Details
Out of stock

15 Inch Steel Hook and Eye

$ 20.00

15 Inch Steel Hook and Eye

15 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

Hook length from center of hook to center of hole that attaches hook to the back plate- 14-1/2″

Overall hook length- 15-1/2″

Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)

Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

Details
Out of stock

12 Inch Steel Hook and Eye

$ 20.00

15 Inch Steel Hook and Eye

12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″

Overall hook length- 12″

Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)

Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

Details
Out of stock

17 Inch Steel Strap Hinge

$ 20.00

17 Inch Steel Strap Hinge

17 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

The exact measurements of the hinge itself are 17-1/4" long, 1-1/2" wide at widest point, tapers to 3/4" at the end.

The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

Details
8 Inch Shutter Slide Bolt

$ 20.00
8 Inch Shutter Slide Bolt
8 Inch Shutter Slide Bolt. These slide shutter bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 6-1/16″ x 1-11/16″

The bolt measures 7-51/16″ x 7/8″

The handle of the bolt projects 1-1/16″ from the rear

The keeper measures 2-1/4″ x 1-3/4″

The bolt throws 2-5/8″ out from the rear plate

Ricca’s Architectural Sales

511 North Solomon Street, New Orleans, LA 70119 (504) 488 – 5524 or (504) 822-8200 Fax: (504) 488 – 5662, Email: riccaarch@yahoo.com

Business Hours:
Tuesday – Friday 9 am – 5 pm Saturday – 9 am – 4 pm
Add to cart Details
Out of stock

Brass Sash Pulley

$ 20.00

Brass Sash Pulley

Brass Sash Pulley measures 4-3/4″ x 1-1/4″ at the face, it mortises 2-1/4″ deep into the jamb of the window.

Details
Embossed Steeple Top Hinges 3-1/2″ x 3-1/2″

$ 20.00

Embossed Steeple Top Hinges 3-1/2" x 3-1/2"

Embossed Iron Steeple Top Hinges 3-1/2″ x 3-1/2″ are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge. The pattern of the embossing is in a floral Victorian style.

Add to cart Details
Ball Top Plain Iron Hinges 3-1/2″ x 3-1/2″

$ 20.00

Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"

Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"- sold as a pair of two hinges (one hinge shown in images). These hinges are made of steel and painted gloss black. The pin is removable for ease of hanging.

Add to cart Details
8 Inch Steel Strap Hinge

$ 18.00

8 Inch Steel Strap Hinge

8 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

The exact measurements of the hinge itself are 8" long, 1-3/4" wide at widest point, tapers to 1/2" at the end.

The pintal measures 4-3/4" tall, 1-3/8" wide, and projects 1" from the back of the plate to the center of the pintal itself.

Add to cart Details
Out of stock

Iron Casement Stay

$ 18.00

Iron Casement Stay

Iron Casement Stay is made to secure casement windows in either a closed or open position. The Maximum throw is 10-1/2". These are meant for use in an outswing application only.

Details
Iron Sash Pulley

$ 18.00

Iron Sash Pulley

Iron Sash Pulley measures 4-3/4" x 1-1/4" at the face, it mortises 2-3/8" deep into the jamb of the window.

Add to cart Details
Large Brass Door Bolt

$ 18.00

Large Brass Door Bolt

Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and 1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″. The keeper measures 1-1/4″ long and 1-1/2″ tall.

Add to cart Details
8 Inch Cast Iron Hook and Eye

$ 16.00

8 Inch Cast Iron Hook and Eye

8 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

Hook length from center of hook to center of hole that attaches hook to the back plate- 7-7/16″

Overall hook length- 8″

Back plate size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

Add to cart Details
Out of stock

8 Inch Steel Hook and Eye

$ 15.00

8 Inch Steel Hook and Eye

8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

Hook length from center of hook to center of hole that attaches hook to the back plate- 7″

Overall hook length- 7-3/4″

Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)

Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

Details
6 Inch Shutter Slide Bolt

$ 15.00

6 Inch Shutter Slide Bolt

6 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 5" x 1-3/4"

The bolt measures 6-11/16" x 13/16"

The handle of the bolt projects 1-1/16" from the rear

The keeper measures 2-1/4" x 1-3/4"

The bolt throws 1-15/16" out from the rear plate

Add to cart Details
Medium Brass Door Bolt

$ 15.00

Medium Brass Door Bolt

Medium Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 4-1/2″ long and 1-1/4″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-1/4″. The keeper measures 1-1/4″ long and 1-1/2″ tall.

Add to cart Details
Brass Embossed Sash Lock

$ 14.50

Brass Embossed Sash Lock

Brass Embossed Sash Lock can be used either with casement or double hung windows. With double hung sashes the moving part of the latch would mount to the bottom sash and the keeper would mount to the top sash. The back plate of the keeper measures 2-3/8" x 7/8" and is a total of 3/4" tall. The back plate of the moving part of the latch measures 2-3/8" x 1-1/8". The arm measures 3-1/4" x 1".

Add to cart Details
# 00 Right Lull and Porter style Shutter Hinge

$ 14.25

# 00 Right Lull and Porter Style Shutter Hinge

# 00 Right Lull & Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open – 8-3/4″

Hinge throw from casing – 6″

Hinge height at mortise -3-15/16″

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 00 Left Lull and Porter style Shutter Hinge

$ 14.25

# 00 Left Lull and Porter style Shutter Hinge

# 00 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open – 8-7/8″

Hinge throw from casing – 6″

Hinge Height at mortise- 3-15/16″

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
6 Inch Cast Iron Hook and Eye

$ 14.00

6 Inch Cast Iron Hook and Eye

6 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

Hook length from center of hook to center of hole that attaches hook to the back plate- 5-3/8″

Overall hook length- 6″

Back plate size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

Add to cart Details
Out of stock

Brass Transom Latch

$ 12.50

Brass Transom Latch

Brass Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of solid brass.

Details
4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing

$ 12.00

4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing

4 Inch Cast Iron Hook and Eye with Diamond Shaped Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

Hook length from center of hook to center of hole that attaches hook to the back plate-4″

Overall hook length- 4-1/2″

Back plate size- 2″ x 1-3/8″ (7/8″ deep)

Eye size- 2″ x 1-3/8″ (7/8″ deep)

Add to cart Details
4 Inch Cast Iron Hook and Eye with Round Backing

$ 12.00

4 Inch Cast Iron Hook and Eye with Round Backing

4 Inch Cast Iron Hook and Eye with Round Backing. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

Hook length from center of hook to center of hole that attaches hook to the back plate- 3-1/2"

Overall hook length- 4"

Back plate size- 1-3/4" x 1-3/8" (1-1/4" deep)

Eye size- 1-3/4" x 1-3/8" (1-1/4" deep)

Add to cart Details
Brass Victorian Sash Lift

$ 12.00

Brass Victorian Sash Lift

Brass Victorian Sash Lift measures 5-1/4" x 1-3/4" and mortises 3/8" deep at 2-3/4" x 1-1/8".

Add to cart Details
Small Brass Door Bolt

$ 12.00

Small Brass Door Bolt

Small Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 3-3/4" long and 1-3/8" wide, stands 1-1/4" tall from the surface of the door, and throws 10/16". The keeper measures 7/8" long and 1-1/4" tall.

Add to cart Details
Brass Flush Bolt

$ 12.00

Brass Flush Bolt

Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and 1-3/8" wide.

Add to cart Details
Out of stock

Brass Knuckle Sash Lock

$ 10.50

Brass Knuckle Sash Lock

Brass Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x 3/4". It is made of solid brass.

Details
Traditional Brass Sash Lock

$ 10.00

Traditional Brass Sash Lock

Traditional Brass Sash Lock is meant for use with double hung style windows. The base of the latch measures 2-5/8" x 7/8" and the base of the keeper measures 2-1/2" x 5/8".

Add to cart Details
6 Inch Shutter Pull

$ 10.00

6 Inch Shutter Pull

6 Inch Shutter Pull. These pulls are usually located on the inner stile of a shutter in order to close it from inside of your window. The handle is done in a bail style and folds away to a 1/4" profile when not in use. These do not come with screws. The rear plate is steel and the handle is cast iron. They come powder coated in a matte black finish.

The Shutter Pulls have the following dimensions:

Height- 6-1/4"

Width- 1"

Center to Center of outer Screw Holes- 5-1/2"

Handle height- 3-7/8"

Handle Depth- 1-1/4"

Add to cart Details
Iron Parliament Hinge with Four and Three Quarter Inch Offset

$ 9.75

Iron Parliament Hinge with Four and Three Quarter Inch Offset

Iron Parliament Hinge with Four and Three Quarter Inch Offset measures a total of 7″ wide and 3-3/8″ tall. It mortises into the door or jamb 1-1/8″ x 3-3/8″ and has a throw of 4-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

Add to cart Details
Iron Parliament Hinge with Five and Three Quarter Inch Offset

$ 9.75

Iron Parliament Hinge with Five and Three Quarter Inch Offset

Iron Parliament Hinge with Five and Three Quarter Inch Offset measures a total of 7-7/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1-1/16″ x 2-7/8″ and has a throw of 5-3/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

Add to cart Details
Iron Casement Sash Latch

$ 9.50

Iron Casement Sash Latch

Iron Casement Sash Latch comes with the latch, and two different keepers (one meant for use with a pair of casements which is surface mount and one meant for use with a single casement which mortises into the jamb).

The latch's back plate measures 2-1/8" tall, 1-1/4" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb.

Add to cart Details
Brass Eastlake Pull

$ 9.50

Brass Eastlake Pull

Brass Eastlake Pull measures 4-1/4" tall, 1-5/8" wide, and 1" deep.

Add to cart Details
Out of stock

Iron Transom Latch

$ 9.50

Iron Transom Latch

Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.

Details
Iron Parliament Hinge with Three Inch Offset

$ 9.50

Iron Parliament Hinge with Three Inch Offset

Iron Parliament Hinge with Three Inch Offset measures a total of 5-1/8" wide and 2-7/8" tall. It mortises into the door or jamb 1" x 2-7/8" and has a throw of 3" when open. The pin on the hinge is removable making it function as either a right or left hand swing.

Add to cart Details
Iron Parliament Hinge with Four and a Quarter Inch Offset

$ 9.50

Iron Parliament Hinge with Four and a Quarter Inch Offset

Iron Parliament Hinge with Four and a Quarter Inch Offset measures a total of 6-3/8″ wide and 2-7/8″ tall. It mortises into the door or jamb 1″ x 2-7/8″ and has a throw of 4-1/4″ when open. The pin on the hinge is removable making it function as either a right or left hand swing.

Add to cart Details
Out of stock

Brass Oval Beaded Sash Lift

$ 9.00

Brass Oval Beaded Sash Lift

Brass Oval Beaded Sash Lift measures 4" x 2" and mortises into the sash 3/8" deep at 2-3/4" x 1-1/4".

Details
Out of stock

Iron Knuckle Sash Lock

$ 8.50

Iron Knuckle Sash Lock

Iron Knuckle Sash Lock is meant for use with double hung windows. The lock comes with two pieces, the latching part, and the receiver which gets overlapped. These were found on most double hung sashes in New Orleans that predated the 1910's. The base of the latching part measures 1-7/8" x 13/16". The base of the receiver measures 1-7/8" x 3/4". It is made of cast iron and painted black.

Details
Brass Fleur de Lis Pull

$ 8.50

Brass Fleur de Lis Pull

Brass Fleur de Lis Pull measures 6-1/2" tall, 1-3/8" wide, and 1" deep. The screw holes measure 4-1/2" center to center.

Add to cart Details
Out of stock

Embossed Brass Pull

$ 8.50

Embossed Brass Pull

Embossed Brass Pull measures 6-1/2" tall, 1-1/4" wide, and 1-1/4" deep.

Details
Iron Spanish Rose Bin Pull

$ 8.50

Iron Spanish Rose Bin Pull

Iron Spanish Rose Bin Pull measure 4-1/8" wide, 1-5/8" tall, and 1-1/16" deep. The screw holes measure 3-3/8" center to center. They are painted black.

Add to cart Details
Out of stock

Iron Arched Bin Pull

$ 8.50

Iron Arched Bin Pull

Iron Arched Bin Pull measures 4" wide, 1-5/8" tall, and 1/2" deep. They are powder-coated black.

Details
Iron Ornate Fleur de Lis Bin Pull

$ 8.50

Iron Ornate Fleur de Lis Bin Pull

Iron Ornate Fleur de Lis Bin Pull measures 4-1/4" wide, 1-1/2" tall, and 3/4" deep. The screw holes measure 2-3/4" center to center. They are painted black.

Add to cart Details
Iron Rectangular Bin Pull

$ 8.50

Iron Rectangular Bin Pull

Iron Rectangular Bin Pull measures 3-1/2" wide, 1-1/2" tall, and 3-4" deep. The screw holes measure 2-7/8" center to center. They are painted black.

Add to cart Details
Out of stock

Large Iron Fleur de Lis Pull

$ 8.50

Large Iron Fleur de Lis Pull

Large Iron Fleur de Lis Pull measures 9" tall, 1-5/8" wide, and 1-7/8" deep. The screw holes measure 7-5/8" center to center. They are painted black.

Details

Title