Iron

Out of stock

Iron Transom Latch

$ 9.50

Iron Transom Latch

Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.

Details
Iron Pivot Hinge For Transoms

$ 5.50

Iron Pivot Hinge for Transoms

Iron pivot hinge for transoms include one hinge- the pin side and the receiver side. You will need to order two in order to do one sash. These are made of cast iron and left unfinished.

The pin side has the following measurements:

Center to center of screw hole 1-1/2"

Face of Hinge -2-3/8" tall, 7/8" wide, and mortises 1/8" into the face of the transom.

Side of hinge- 5/8" tall, 7/8" wide, 1/8" thick, center of pin to edge 3/4", pin diameter 3/8", pin length 11/16"

The receiver side has the following measurements:

Center to center of screw hole 1-1/8"

Diameter of center hole 7/16"

1-11/16" tall, 3/4" wide and 1/8" deep

Add to cart Details
Iron Sash Pulley

$ 18.00

Iron Sash Pulley

Iron Sash Pulley measures 4-3/4" x 1-1/4" at the face, it mortises 2-3/8" deep into the jamb of the window.

Add to cart Details
Iron Window Y

$ 6.75

Iron Window Y

Iron Window Y's are used when the sash no longer stays up on it's own due to damaged or missing sash weights and balances. They mount to the jamb at about the level you want your window open and with a loose screw will pivot in or out of the way of the sash. The bottom of the sash is held up by the v shaped section, with the short end facing the exterior of the home.

The Y measures 2-5/8" long, 2" at it's widest point, and 1/4" thick. It is made of cast iron and painted white.

Add to cart Details
Out of stock

Iron Casement Stay

$ 18.00

Iron Casement Stay

Iron Casement Stay is made to secure casement windows in either a closed or open position. The Maximum throw is 10-1/2". These are meant for use in an outswing application only.

Details
# 00 Left Lull and Porter style Shutter Hinge

$ 14.25

# 00 Left Lull and Porter style Shutter Hinge

# 00 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open – 8-7/8″

Hinge throw from casing – 6″

Hinge Height at mortise- 3-15/16″

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 00 Right Lull and Porter style Shutter Hinge

$ 14.25

# 00 Right Lull and Porter Style Shutter Hinge

# 00 Right Lull & Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open – 8-3/4″

Hinge throw from casing – 6″

Hinge height at mortise -3-15/16″

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 0 Left Lull and Porter style Shutter Hinge

$ 5.15

# 0 Left Lull and Porter style Shutter Hinge

# 0 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open - 6-7/16"

Hinge throw from casing - 4-1/8"

Hinge Height at mortise- 3-1/2"

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 0 Right Lull and Porter style Shutter Hinge

$ 5.15

# 0 Right Lull and Porter style Shutter Hinge

# 0 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 6-7/16"

Hinge throw from casing - 4-1/8"

Hinge Height at mortise-3-1/2"

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 1 Left Lull and Porter style Shutter Hinge

$ 3.75

# 1 Left Lull and Porter style Shutter Hinges

# 1 Left Lull and Porter style Shutter Hinges. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open - 5-1/2"

Hinge throw from casing - 3-11/16"

Hinge Height at mortise-3-3/16"

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 1 Right Lull and Porter style Shutter Hinge

$ 3.75

# 1 Right Lull and Porter style Shutter Hinge

# 1 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 5 -1/2"

Hinge throw from casing - 3-5/8"

Hinge Height at Mortise- 3-1/8"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 1 1/2 Left Lull and Porter style Shutter Hinge

$ 3.75

# 1 1/2 Left Lull and Porter style Shutter Hinge

# 1 1/2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open - 5-1/8"

Hinge throw from casing - 3-1/4"

Hinge Height at mortise- 3"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 1 1/2 Right Lull and Porter style Shutter Hinge

$ 3.75

# 1 1/2 Right Lull and Porter style Shutter Hinge

# 1 1/2 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 5"

Hinge throw from casing - 3-1/4"

Hinge Height at mortise - 2-7/8"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 2 Left Lull and Porter style Shutter Hinge

$ 3.70

# 2 Left Lull and Porter style Shutter Hinge

# 2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open - 4-7/16"

Hinge throw from casing - 2-5/8"

Hinge Height at mortise- 2-15/16"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 2 Right Lull and Porter style Shutter Hinge

$ 3.70

# 2 Right Lull and Porter style Shutter Hinge

# 2 Right Lull and Porter style Shutter Hinge. Right shutter hinge mounts on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 4-7/16"

Hinge throw from casing - 2-1/2"

Hinge Height at mortise-2-7/8"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 2 1/2 Left Lull and Porter style Shutter Hinge

$ 3.20

# 2 1/2 Left Lull and Porter style Shutter Hinge

# 2 1/2 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open - 3-13/16"

Hinge throw from casing - 2-1/16"

Hinge Height at mortise - 2-9/16"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 2 1/2 Right Lull and Porter style Shutter Hinge

$ 3.20

# 2 1/2 Right lull and Porter style Shutter Hinge

# 2 1/2 Right Lull and Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 3-7/8"

Hinge Throw from casing - 2-3/16"

Hinge Height at mortise- 2-7/16"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 3 Left Lull and Porter style Shutter Hinge

$ 3.20

# 3 Left Lull and Porter style Shutter Hinge

# 3 Left Lull and Porter style Shutter Hinge. Left shutter hinges mount on the right side of the window when looking at the window from outside of your home.

Hinge Width when open – 3-1/4″

Hinge throw from casing – 1-1/2″

Hinge Height at mortise- 2-9/16"

They do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
# 3 Right Lull and Porter style Shutter Hinge

$ 3.20

# 3 Right Lull and Porter Style Shutter Hinge

#3 Right Lull & Porter style Shutter Hinge. Right shutter hinges mount on the left side of the window when looking at the window from outside of your home.

Hinge Width when open - 3-1/4"

Hinge throw from casing - 1-3/8"

Hinge height at mortise -2-9/16"

These do not come with screws.

We recommend you prime and paint the hinge before installation, and tighten screws by hand, not with a drill.

Add to cart Details
6 Inch Shutter Slide Bolt

$ 15.00

6 Inch Shutter Slide Bolt

6 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 5" x 1-3/4"

The bolt measures 6-11/16" x 13/16"

The handle of the bolt projects 1-1/16" from the rear

The keeper measures 2-1/4" x 1-3/4"

The bolt throws 1-15/16" out from the rear plate

Add to cart Details
8 Inch Shutter Slide Bolt

$ 20.00
8 Inch Shutter Slide Bolt
8 Inch Shutter Slide Bolt. These slide shutter bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 6-1/16″ x 1-11/16″

The bolt measures 7-51/16″ x 7/8″

The handle of the bolt projects 1-1/16″ from the rear

The keeper measures 2-1/4″ x 1-3/4″

The bolt throws 2-5/8″ out from the rear plate

Ricca’s Architectural Sales

511 North Solomon Street, New Orleans, LA 70119 (504) 488 – 5524 or (504) 822-8200 Fax: (504) 488 – 5662, Email: riccaarch@yahoo.com

Business Hours:
Tuesday – Friday 9 am – 5 pm Saturday – 9 am – 4 pm
Add to cart Details
10 Inch Shutter Slide Bolt

$ 25.00

10 Inch Shutter Slide Bolt

10 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 6-3/4″ x 1-3/4″

The bolt measures 6" x 3/4″

The handle of the bolt projects 5/8″ from the rear

The keeper measures 2-5/8″ x 1-3/4″

The bolt throws 2-15/16″ out from the rear plate

Add to cart Details
12 Inch Shutter Slide Bolt

$ 30.00

12 Inch Shutter Slide Bolt

12 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.

They do not come with screws.

The back plate at the rear of the bolt measures 8-13/16″ x 2-1/16″

The bolt measures 8-3/16″ x 7/8″

The handle of the bolt projects 3/4″ from the rear

The keeper measures 3-13/16″ x 2-1/16″

The bolt throws 3-3/4″ out from the rear plate

Add to cart Details
6 Inch Shutter Pull

$ 10.00

6 Inch Shutter Pull

6 Inch Shutter Pull. These pulls are usually located on the inner stile of a shutter in order to close it from inside of your window. The handle is done in a bail style and folds away to a 1/4" profile when not in use. These do not come with screws. The rear plate is steel and the handle is cast iron. They come powder coated in a matte black finish.

The Shutter Pulls have the following dimensions:

Height- 6-1/4"

Width- 1"

Center to Center of outer Screw Holes- 5-1/2"

Handle height- 3-7/8"

Handle Depth- 1-1/4"

Add to cart Details

Title