Custom Bathroom VanityThis custom bathroom vanity was created using antique cypress lumber salvaged from homes in New Orleans. Not too often do you find a cabinet that is ONLY made of solid wood (without any plywood or composites). Quality in craftsmanship and materials are our goals whenever we produce anything for your home. Please give us a call today to discuss any custom items you may need.
Custom Entry DoorThis custom entry door measures 36" x 96" x 1-3/4" and is made of salvaged cypress lumber from New Orleans. The door does not contain glass, but we would be happy to get you a quote for glass installation. This door was made to replicate the Creole style cottage doors that are present throughout New Orleans. Not the correct size for you? Call us with your size and we would be happy to get you a quote for a different size.
Number 14 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
Number 16 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)
Outer width 23-1/4"
Outer height 27"
Inner width 16"
Inner height at center 23-1/2"
Garden District summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick (or with this style, the face of a cast iron or stone mantle), and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)
Outer width 26-3/8"
Outer height 29-5/8" at center
Inner width 18-1/4"
Inner height 25-3/4" at center
Our 3 foot gate is made from flat steel, hollow steel, and cast iron components. The gate comes with two hollow steel posts, with lift off style hinges included. With each gate you get to choose your finial style- either the spear finial (which matches our loop and spear fencing), or the Fleur de Lis finial. An image of each finial can be seen in the image gallery above. We do not always have these in stock, but we would be happy to order either style for you. If you are coordinating these with our loop and spear fencing, the 3 foot gate looks best with the 2 foot or the 3 foot tall fencing.
The measurements are as follows (measurements may vary slightly as this is a handmade product)
Gate width without hinges: 36"
Gate height at center- including finials: 36-1/4"
Gate height at sides: 30-1/4"
Post dimensions: 2" x 2"
MINIMUM Opening measurement required for installation: 41-1/2"
This Czech Crystal (30% leaded) chandelier features 10 arms and is absolutely loaded with prisms. It dates back to the 1930's and was recently rebuilt and rewired. This one is a stunner! We cannot ship this product UPS , please call for a freight quote!
Antique Stewart Iron Works Wrought Iron Gate
This gate, manufactured in Cincinnati, Ohio by the Stewart Ironworks Company, measures 37" wide with the mounting hardware and primitive latch, or 31-1/2" wide as just the gate. It measures 52" tall at the center, and 42" tall at the sides. It needs a weld at the bottom right corner, the top finial is slightly bent, and may need some bondo work at the top left, but is otherwise in great shape for its age. There is a great makers plaque at the center, pictured in the gallery of images. The primitive latch is still functioning. The gate comes with the portion of the hinge that bolts to your fence post and the rod that attaches your gate to the hinge. The iron details on this gate are exquisite. Please call for a shipping quote if you are interested in this gate as we cannot ship it using UPS.
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
Victorian style Stained Glass Window. This window measures 3' wide by 4' tall including the frame. It is framed in Mahogany. It includes Flemish glass, beveled glass, Kokomo glass (in several shades of blue, green, yellows, and oranges), textured glass (in amber and violet),and some ruby glass jewels. The caming is zinc. This piece has been reinforced on the rear of the piece. It is truly spectacular in person! This item is too fragile and large to ship using UPS, therefore we are not selling them directly through the website. Please call us at 504 488 5524 and we would be happy to get you a quote for commercial freight.
The Baton Rouge Line Door combines clean lines with classic style. These doors are made from Mahogany with engineered stiles. We manufacture them with two different glass lengths in multiple sizes. The glass is clear, flat, and tempered; a single sheet of 1/4 inch glass. These are sold in a 7' height but can be trimmed to 78" tall in height if desired. These doors are sold as slabs only- no jambs included, and are unfinished and un- bored. Please call to get a freight quote before ordering, the price below does not include shipping.
The first glass length is 48" with a shorter panel.
These are available in the following sizes:
36" x 84" x 1-3/4"
34" x 84" x 1-3/4"
32" x 84" x 1-3/4"
30" x 84" x 1-3/4"
18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients
The second glass length is 36" with a panel almost halfway up the door
These are available in the following sizes: 36" x 84" x 1-3/4"
34" x 84" x 1-3/4"
18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients
Flat Panel with Shaker Profile Doors- Traditionally have flat panels (either plywood or cypress) with a square profile on the stiles and rails.
Flat T Panel With Shaker Profile
Flat Panel with Shaped Profile Doors- These are the most common of the T panel doors, panels are flat (either plywood or cypress) with a shaped profile on the stiles and rails.
Raised Panel Doors- The least common of the T panel styles, has cypress raised panels.
Raised T Panel
Antique T panel doors come in widths from 28″ wide to 34″ wide, although we do have some others in odd widths. The height starts around 76″, and up to 84″ normally we do have some in odd heights. The thickness ranges from 1″ to 1-1/2″.
Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.
This amazing pair of Stained Glass Pocket Doors measures a massive 10 feet wide by 11 feet tall (image shows one door). The glass features German bottle bottom pieces, with a very large one in the center at the top, and two beautiful shades of blue textured glass. There are three panels at the bottom of each door, each panel is raised with an applied molding surrounding them. These are massive. The photos do not do them justice in any way. They could be used as standard swinging doors, in either an interior or exterior application. Please call 504 488 5524 if you are interested in getting a shipping quote.
This Spanish Cast Brass 6 arm Chandelier is rewired and ready to hang. It features six brass arms with crystal baubaches wired for standard base lamps (no greater than 40 watts each). It is marked at the top with the made in Spain logo. It was probably manufactured between 1950 and 1965. It has crystal tear drops which refract the light perfectly.
The measurements are as follows:
24″ wide
23″ tall body with crystal
39″ of chain and canopy
The bottom of this chandelier would hang 62″ from the ceiling, perfect for 11′ or 12' ceilings.
This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Currently available in 3-1/2" x 3-1/2". Features five knuckles with two ball bearings and three screw holes per side.
We have two of these Small Henry Lips Original Stained Glass pieces. They are framed in reclaimed cypress and measure approximately 28" x 51-3/4" x 1-3/8" each. These are signed A Henry Lips 11-1-80 in the corner, please see supplemental image.
The Lips family has been in the stained glass business in New Orleans for many years. Multiple family members create beautiful pieces of art that hang in some of the most affluent homes in the south. Mr. Henry is still in business, handcrafting these beauties.
These two coordinate with three larger pieces we have in a separate listing, and by no means are they small. There are nice complimentary blues and oranges as well as amber and a neutral opaque.
These Items are too large and fragile to ship using UPS therefore we ask you to call 504 488 5524 if you are interested in purchasing them so we may get you a freight quote with a commercial freight company.
The Short New York Formal Bench measures 44″ wide at the front, 35″ wide at the rear, 15-1/2″ deep, with a 17" tall seat, and 34-1/2″ tall rear.
The bench is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the bench painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
The Saint Phillip Street wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
The Saint Phillip Street post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
The Old Village wall mount lantern 24″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light cluster function)
The Old Village wall mount lantern 17.5" tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is black with the electric two light cluster function)
This new simple bracket measures 23″ Long x 16″ tall x 4″ deep. It was created from antique, reclaimed cypress here in the shop. Please call 504 488 5524 for availability as we do not always have it in stock. These cannot be shipped using UPS but we can get you a commercial freight quote when you call in.
