Shop

Home/Shop
  • Out of stock

    8 Inch Steel Hook and Eye

    8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7″

    Overall hook length- 7-3/4″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    8 inch steel Hook and eye

  • 8 Inch Cast Iron Hook and Eye

    8 Inch Cast Iron Hook and Eye. Contains one hook and one eye. All components are made of cast iron and powder coated in a matte black finish.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 7-7/16″

    Overall hook length- 8″

    Back plate size- 1-3/4″ x 1-3/8″  (1-1/4″ deep)

    Eye size- 1-3/4″ x 1-3/8″ (1-1/4″ deep)

    8 inch cast iron hook and eye

  • Large Brass Door Bolt

    Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and  1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″.  The keeper measures 1-1/4″ long and 1-1/2″ tall.

    Large Brass Door Bolt

  • Iron Transom Latch

    Iron Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of cast iron and painted black.

    Iron transom Latch

  • Iron Sash Pulley

    Iron Sash Pulley measures 4-3/4" x 1-1/4" at the face, it mortises 2-3/8" deep into the jamb of the window.

    Iron-window-pulley

  • 8 Inch Steel Strap Hinge

    8 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 8" long,  1-3/4" wide at widest point, tapers to 1/2" at the end.

    The pintal measures 4-3/4" tall, 1-3/8" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    8 inch steel strap hinge

  • Iron Casement Sash Latch

    Iron Casement Sash Latch comes with the latch, and two different keepers (one meant for use with a pair of casements which is surface mount and one meant for use with a single casement which mortises into the jamb).

    The latch's back plate measures 2-1/8" tall, 1-1/4" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb.

    Iron Casement Latch

  • Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"

    Ball Top Plain Iron Hinges 3-1/2" x 3-1/2"- sold as a pair of two hinges (one hinge shown in images). These hinges are made of steel and painted gloss black. The pin is removable for ease of hanging. plain Ball top closed

    Plain ball top open

  • Embossed Steeple Top Hinges 3-1/2" x 3-1/2"

    Embossed Iron Steeple Top Hinges 3-1/2″ x 3-1/2″ are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge. The pattern of the embossing is in a floral Victorian style. three and a half by three and a half steeple 1 openthree and a half by three and a half steeple 1 closed

  • Out of stock

    Small Soffit Vent

    Small Soffit Vent measures 11-5/8" in diameter. They are made of cast aluminum, and sold unfinished. These can be used for venting the attic from your soffit, or look great as a decorative piece on a wooden gate.

    small soffit vent

  • Brass Sash Pulley

    Brass Sash Pulley measures 4-3/4″ x 1-1/4″ at the face, it mortises 2-1/4″ deep into the jamb of the window.

    Brass Window Pulley

  • 8 Inch Shutter Slide Bolt

    8 Inch Shutter Slide Bolt. These slide shutter bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.
    • They do not come with screws.
    • The back plate at the rear of the bolt measures 6-1/16″ x 1-11/16″
    • The bolt measures 7-51/16″ x 7/8″
    • The handle of the bolt projects 1-1/16″ from the rear
    • The keeper measures 2-1/4″ x 1-3/4″
    • The bolt throws 2-5/8″ out from the rear plate

    Ricca’s Architectural Sales

    511 North Solomon Street, New Orleans, LA 70119 (504) 488 – 5524 or (504) 822-8200 Fax: (504) 488 – 5662, Email: riccaarch@yahoo.com
    Business Hours:
    Tuesday – Friday 9 am – 5 pm Saturday – 9 am – 4 pm

    8 inch shutter slide bolt

  • Out of stock

    17 Inch Steel Strap Hinge

    17 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 17-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    17 inch steel strap hinge

  • Out of stock

    15 Inch Steel Hook and Eye

    12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″

    Overall hook length- 12″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    12 inch steel hook and eye

  • Out of stock

    15 Inch Steel Hook and Eye

    15 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 14-1/2″

    Overall hook length- 15-1/2″

    Back plate size- 1-1/2″ x 3-3/8″  (1-1/4″ deep)

    Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)

    We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.

    15 inch steel hook and eye

  • Out of stock

    17 Inch Steel Hook and Eye

    17 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.

    Hook length from center of hook to center of hole that attaches hook to the back plate- 16″

    Overall hook length- 17″

    Back plate size- 1-1/2″ x 3-1/4″  (1-3/8″ deep)

    Eye size- 1-1/2″ x 3-1/4″ (3/4″ deep)

    17 inch steel hook and eye

  • Out of stock

    12 Inch Steel Strap Hinge

    12 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 12-1/2" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    12 inch steel Strap hinge

  • Out of stock

    15 Inch Steel Strap Hinge

    15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.

    The exact measurements of the hinge itself are 15-1/4" long,  1-1/2" wide at widest point, tapers to 3/4" at the end.

    The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.

    15 inch steel strap hinge

  • Brass Casement Sash Latch

    Brass Casement Sash Latch comes with the latch, and three different keepers (one meant for use with a pair of casements which is surface mount and two meant for use with a single casement which mortises into the jamb).

    The latch's back plate measures 2-1/16" tall, 1-5/16" wide and projects 2" from the surface of the window. The surface mount keeper measures 2" tall, 9/16" wide and projects 7/8" from the surface of the window. The first mortised keeper measures 2-1/8" tall, a total of 1-3/4" deep, and mortises 1" x 1/8" into the jamb and the second mortised keeper measures 5/8" x 2-3/8" x 1/16".

    brass casement latch

  • Brass Transom Latch

    Brass Transom Latch can be used in conjunction with pivoting transom hinges and would mount on the bottom rail of the transom, with the strike plate being mortised to the bottom of the transom's jamb. The latch is operated by pulling up on the loop at the top. (one of our clients suggests mounting a hook to the top of a broom stick to avoid getting on a stool.) The latch measures 2-1/8" wide, 1-1/4" tall, and 5/8" deep (with the loop standing 1-3/8" deep). The strike plate measures 1-3/4" wide, 1-1/2" deep, and mortises 1-3/4" x 3/4"x 3/16" into the jamb. It is made out of solid brass.

    Brass Transom Latch

  • Brass Through Shutter Latch

    Brass Through Shutter Latch. These solid brass shutter latches are polished and lacquered to prevent immediate tarnish. They are intended to be mortised through the bottom of the shutter and hook to their keeper mounted on the window sill. When open they connect to a keeper mounted on the exterior of the home. These latches take the place of both dogs and slide bolts. These latches are meant for use on shutters 1-3/8" thick or less.  Each kit includes the latch, a plate for the rear of the shutter, a keeper for the sill, and a keeper for the wall. One kit will do a single shutter, you will need two kits for each window.

    The latch itself (the part that goes through the shutter) measures 2-3/8" at the top and 1-15/16" at the bottom

    The pull (the piece that you would operate) measures-1-1/4" tall and projects out 2" at the most (latch is 1-3/8" from the plate)

    The plate connected to the latch is 2" wide and 1-1/2" tall

    The plate that goes on the rear measures 1-3/8" tall and 1-1/2" wide

    The sill keeper (looks like bottle opener) is 1-3/4" deep and 1" wide

    The wall keeper (L shaped) is 1-1/16" tall, 15/16" wide and projects 1" from the wall

    Brass Through Shutter Latch Kit

  • Iron Lion Door Knocker

    Iron Lion Door Knocker back plate measures 3-5/8" wide and 4-1/4" tall. The overall height is 5-7/8". The strike plate is 1-3/4" in diameter. The knocker and  strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.

    b

  • fleur-de-lis-door-knocker

    Iron Fleur de Lis Door Knocker

    Iron Fleur de Lis Door Knocker measures 3-7/8" wide and 5-1/4" tall overall. The strike plate measures 1-3/4" in diameter. The knocker and  strike plate attach to your door with machine style bolts, that extend through the rear of your door.

     

     
  • Embossed Ball Top Iron Hinges 4" x 4"

    Embossed Ball Top Iron Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.

    four by four embossed ball top open

    four by four embossed ball top closed

Title

Go to Top