(504) 488-5524 or (504) 822-8200|riccaarch@yahoo.com
FacebookYouTube

Shop

Home/Shop
  •

    Solid Brass St. Julian Knobs and Plates Set

    $ 42.00 – $ 60.00

    Solid Brass St. Julian Knobs and Plates Set

    Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 8-1/2″

    The Knobs are 2-3/8″ in diameter

    The set projects 2-1/2″ from the face of the door

    RO31b

    Select options Details

  • 28 Inch Iron Head Bolt

    $ 45.00

    28 Inch Iron Head Bolt

    28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).

    28 inch iron head bolt

    Add to cart Details
  • 9 inch foot bolt

    9 Inch Brass Foot Bolt

    $ 45.00
    Add to cart Details
  • Out of stock

    Embossed Ball Top Hinges 4-1/4″ x 4-7/8″

    $ 45.00

    Embossed Ball Top Hinges 4-1/4" x 4-7/8"

    Embossed Ball Top Hinges 4-1/4" x 4-7/8" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge, the spine of the hinge, and on both finials. The pattern of the embossing is in a floral Victorian style.

    four and a half by five openfour and a half by five closed

    Details
  • Out of stock

    Solid Brass Beaded Oval Knobs and Plates Set

    $ 45.00

    Solid Brass Beaded Oval Knobs and Plates Set

    Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.

    The back plates measure 2-1/4″ x 7″ at their widest points

    The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door

    VB1197B
    Details
  • Out of stock

    Solid Brass Gothic Knobs and Plates Set

    $ 45.00

    Solid Brass Gothic Knobs and Plates Set

    Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.

    The back plates measure 1-5/8″ x 6-1/8″ at their widest points

    The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door

    PA-7.JPG

     
    Details
  • Out of stock

    Brushed Nickel Ritz Sconce

    $ 45.00

    Brushed Nickel Ritz Sconce

    Brushed Nickel Ritz Sconce

     
    Details
  • Out of stock

    Solid Brass Amarat Door Knobs and Plates Set

    $ 46.00

    Solid Brass Amarat Door Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.

    The plates measure 1-1/2" x 5-1/2"

    The Knobs are 2-1/4" in diameter

    The set projects 2-1/4" from the face of the door

    R105

    Details
  • Out of stock

    Solid Brass Magnolia Door Knobs and Plates Set

    $ 46.00

    Solid Brass Magnolia Door Knobs and Plates Set

    Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was  used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-5/8″ x 5-3/8″

    The Knobs are 2-3/16″ in diameter

    The set projects 2-1/2″ from the face of the door

    R106

    Details

  • Solid Brass Daisy Knobs and Plates Set

    $ 46.00

    Solid Brass Daisy Knobs and Plates Set

    Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-3/4″ x 5-11/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R107

    Add to cart Details
  • Out of stock

    Solid Brass Broken Leaf Knobs and Plates Set

    $ 46.00

    Solid Brass Broken Leaf Knobs and Plates Set

    Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.

    The plates measure 1-1/2″ x 5-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-1/2″ from the face of the door

    R108

    Details
  • 20 inch head bolt

    20 Inch Brass Head Bolt

    $ 48.00
    Add to cart Details

  • Four Inch Steeple Top Embossed Brass Hinges

    $ 48.00

    Four Inch Steeple Top Embossed Brass Hinges

    Four Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.

    four inch embossed brass hinge

    Add to cart Details

  • Solid Brass Concentric Knobs and Plates Set

    $ 48.00 – $ 142.00

    Solid Brass Concentric Knobs and Plates Set

    Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors,  but can be customized below to suit your needs.

    We also have these available in a tarnished metal, although color may vary we have attached a photo of a tarnished set below. These sets were under water during Hurricane Katrina, and are priced lower than our list price.

    The back plates measure 2-1/2″ x 7-9/16″ at their widest points

    The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door

    PA-9.JPG

    Select options Details

  • Small Victorian Foundation Vent

    $ 50.00

    Small Victorian Foundation Vent

    Small Victorian Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 8″ tall. The front measurement is 17-3/4″ wide and 12-1/4″ tall. The vent recesses into the foundation 3-1/2″ deep.

    Small Victorian Foundation

    Add to cart Details

  • Small Rectangular Foundation Vent

    $ 50.00

    Small Rectangular Foundation Vent

    Small Rectangular Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 7-7/8″ tall. The front measurement is 15-1/8″ wide and 10-1/8″ tall. The vent recesses into the foundation 3″ deep.

    small rectangular foundation

    Add to cart Details

  • Small Plain Oval Foundation Vent

    $ 50.00

    Small Plain Oval Foundation Vent

    Small Plain Oval Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 12″ wide and 6-1/2″ tall. The front measurement is 15-7/8″ wide and 10-1/4″ tall. The vent recesses into the foundation 3″ deep.

    small oval foundation vent

    Add to cart Details
  • Out of stock

    Flat Victorian Foundation Vent

    $ 50.00

    Flat Victorian Foundation Vent

    Flat Victorian Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally are screwed to the foundation. The measurement is 21-3/8″ wide and 13-5/8″ tall. The vent does not recess.

    Flat Foundation

    Details
  • 26 inch head bolt

    26 Inch Brass Head Bolt

    $ 55.00
    Add to cart Details
  • Out of stock

    Small Fluted Urn

    $ 60.00

    Small Fluted Urn

    15" tall

    12" in diameter

    The urn is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the urn painted black but is not indicative of how it is sold.

    We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.

    tc450-480x648

    Details

  • Solid Brass Haven Knobs and Plates Set

    $ 62.00

    Solid Brass Haven Knobs and Plates Set

    Solid Brass Haven Door Knobs and Plates Set. Originally patented in 1905 by Sargent Hardware Company the “Haven” pattern was used at the end of the Victorian era, as well as through the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, but it can be made into “dummy knobs”(call for price). They do not come with any latch or locking device.

    The plates measure 2-1/4″ x 8-5/16″

    The Knobs are 2-1/4″ in diameter

    The set projects 2-3/4″ from the face of the door

    PA8

    Add to cart Details

  • Solid Brass Jerome Knobs and Plates Set

    $ 63.00

    Solid Brass Jerome Knobs and Plates Set

    Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.

    The plates measure 2-1/2″ x 9-1/8″

    The Knobs are 2-1/4″ in diameter

    The set projects 3″ from the face of the door

    337 A

    Add to cart Details

  • Large Rectangular Foundation Vent

    $ 65.00

    Large Rectangular Foundation Vent

    Large Rectangular Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 14-1/4" wide and 8-5/8" tall. The front measurement is 17-1/2" wide and 11-3/4" tall. The vent recesses into the foundation 3" deep.

    large rectangular foundation vent

    Add to cart Details

  • Large Plain Oval Foundation Vent

    $ 65.00

    Large Plain Oval Foundation Vent

    Large Plain Oval Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 14″ wide and 8-1/4″ tall. The front measurement is 18-1/4″ wide and 12-3/8″ tall. The vent recesses into the foundation 3-3/8″ deep.

    large oval foundation

    Add to cart Details

Title

Go to Top