-
Large Iron Fleur de Lis Pull
Large Iron Fleur de Lis Pull measures 9" tall, 1-5/8" wide, and 1-7/8" deep. The screw holes measure 7-5/8" center to center. They are painted black.
-
Large Iron Fleur de Lis Pull
Large Iron Fleur de Lis Pull measures 7-1/4" tall, 1-1/2" wide, and 1-1/2" deep. The screw holes measure 5-5/16" center to center. They are painted black.
-
Small Iron Fleur de Lis Pull
Small Iron Fleur de Lis Pull measure 4-1/8" long, 1-1/8" wide, and 7/8" deep. The screw holes measure 2-3/4" center to center. They are painted black.
-
Iron Rectangular Bin Pull
Iron Rectangular Bin Pull measures 3-1/2" wide, 1-1/2" tall, and 3-4" deep. The screw holes measure 2-7/8" center to center. They are painted black.
-
Iron Ornate Fleur de Lis Bin Pull
Iron Ornate Fleur de Lis Bin Pull measures 4-1/4" wide, 1-1/2" tall, and 3/4" deep. The screw holes measure 2-3/4" center to center. They are painted black.
-
Iron Spanish Rose Bin Pull
Iron Spanish Rose Bin Pull measure 4-1/8" wide, 1-5/8" tall, and 1-1/16" deep. The screw holes measure 3-3/8" center to center. They are painted black.
-
Oval Iron Bin Pull
Oval Iron Bin Pull measures 3-3/8" wide, 1-3/8" tall, and 3/4" deep. The screw holes measure 2-7/8" center to center. They are painted black.
-
Extra Large Brass Bin Pull
Extra Large Brass Bin Pull measure 3-3/8" wide, 1-1/4" tall, and 5/8" deep. The screw holes are 2-7/8" center to center.
-
Small Brass Bin Pull
Small Brass Bin Pull measures 3-1/4" wide, 3/4" tall, and 5/8" deep. The screw holes measure 2-3/4" center to center.
-
Medium Brass Bin Pull
Medium Brass Bin Pull measures 3-1/2" wide, 1" tall, and 5/8" deep. The screw holes measure 3" center to center.
-
Large Brass Bin Pull
Large Brass Bin Pull measures 4" wide, 1" tall, and 5/8" deep. the screw holes are 3-1/2" center to center.
-
Iron Lion Door Knocker
Iron Lion Door Knocker back plate measures 3-5/8" wide and 4-1/4" tall. The overall height is 5-7/8". The strike plate is 1-3/4" in diameter. The knocker and strike plate attach to your door with one machine style bolt each, that extends through the rear of your door.
-
Iron Bat Door Knocker
Iron Bat door Knocker measures 2-3/4" wide, 9-1/8" tall and projects 1-5/8" from the surface of your door. It attaches to your door with two wood screws. This knocker is a replica of a knocker from one of Mr. Ricca's properties on the corner of Burgundy and Governor Nicholls streets.
-
Brass Eastlake Door Bell
Brass Eastlake Door Bell measures 2-1/4″ wide and 6-3/8″ tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.
-
Brass Acanthus Door Bell
Brass Acanthus Door Bell measures 2-7/8" wide and 6-1/4" tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.
-
Out of stock
8 Inch Iron Foot Bolt
8 Inch Iron Foot Bolt is most often used on a double door application and secures the stationary door at the bottom, it is highly recommended for use with a head bolt (or top bolt) to prevent warping. The bolt measures 9-1/4″ tall and the rear plate measures 1-7/8″ wide by 5-1/2″ tall. The bolt tongue measures 1-1/16″ when activated, and is 3/4″ wide. The bolt comes with two different keepers, one used when the threshold extends well past the door and can be mortised into, and one used when the threshold does not extend much past the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down with your hand, never forward away from the surface of the door, or operated with your foot (this action would put stress on the weld that attaches the arm to the bolt).
-
Out of stock
16 Inch Iron Head Bolt
16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).
-
28 Inch Iron Head Bolt
28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).
-
Brass Flush Bolt
Brass Flush Bolt is used with double door sets on the stationary panel and mortises into the margin of the door at the top and bottom of the door. Two bolts would be needed to properly hold the door in place and prevent warping. These specific bolts are used when you do not want to see hardware when your doors are closed, achieving a cleaner, more modern look. the bolt measures 3/4" wide, 8" tall and 1-3/8" deep. Each bolt comes with a strike plate measuring 3/4"deep and 1-3/8" wide.
-
Large Brass Door Bolt
Large Brass Door Bolts can be used for interior doors that require a locking function (ex. bathrooms or bedrooms) where the door is flush with the casing. This bolt measures 6-1/8″ long and 1-1/2″ wide, stands 1-1/2″ tall from the surface of the door, and throws 1-5/8″. The keeper measures 1-1/4″ long and 1-1/2″ tall.
