Embossed Ball Top Iron Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.
Embossed Iron Steeple Top Hinges 4" x 4" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge and the reveal on the side of the hinge. The pattern of the embossing is in a linear Eastlake Victorian style.
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
Medium Soffit Vent measures 13-1/16" in diameter. They are made of cast aluminum, and sold unfinished. These can be used for venting the attic from your soffit, or look great as a decorative piece on a wooden gate, or even covers for can lighting on your front porch.
10 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.
They do not come with screws.
The back plate at the rear of the bolt measures 6-3/4″ x 1-3/4″
The bolt measures 6" x 3/4″
The handle of the bolt projects 5/8″ from the rear
The keeper measures 2-5/8″ x 1-3/4″
The bolt throws 2-15/16″ out from the rear plate
Iron Bat door Knocker measures 2-3/4" wide, 9-1/8" tall and projects 1-5/8" from the surface of your door. It attaches to your door with two wood screws. This knocker is a replica of a knocker from one of Mr. Ricca's properties on the corner of Burgundy and Governor Nicholls streets.
Brass Lion Door Knocker's back plate measures 3-1/4" wide and 4-1/4" tall, the overall height is 6". The strike plate measures 1-3/8" in diameter. The knocker and strike plate attach to your door with machine style bolts, that extend through the rear of your door.
Large Soffit Vent measures 17-1/16" in diameter. They are made of cast aluminum, and sold unfinished. These can be used for venting the attic from your soffit, or look great as a decorative piece on a wooden gate.
12 Inch Shutter Slide Bolt. These slide bolts are meant to mount to a pair of shutters in the space between the shutter and the window and function to fasten the shutters during a storm. The back plate, keeper, and straps are made of steel and the bolt itself is made of cast iron. They are powder coated in a glossy black finish.
They do not come with screws.
The back plate at the rear of the bolt measures 8-13/16″ x 2-1/16″
The bolt measures 8-3/16″ x 7/8″
The handle of the bolt projects 3/4″ from the rear
The keeper measures 3-13/16″ x 2-1/16″
The bolt throws 3-3/4″ out from the rear plate
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
8 Inch Iron Foot Bolt is most often used on a double door application and secures the stationary door at the bottom, it is highly recommended for use with a head bolt (or top bolt) to prevent warping. The bolt measures 9-1/4″ tall and the rear plate measures 1-7/8″ wide by 5-1/2″ tall. The bolt tongue measures 1-1/16″ when activated, and is 3/4″ wide. The bolt comes with two different keepers, one used when the threshold extends well past the door and can be mortised into, and one used when the threshold does not extend much past the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down with your hand, never forward away from the surface of the door, or operated with your foot (this action would put stress on the weld that attaches the arm to the bolt).
Embossed kick bolts- available in two sizes and two finishes
The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows. We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.
The small bolts have the following measurements:
The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
The large bolts have the following measurements:
The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
Brass Eastlake Door Bell measures 2-1/4″ wide and 6-3/8″ tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.
Brass Acanthus Door Bell measures 2-7/8" wide and 6-1/4" tall. This door bell is made for hard wired systems only- it will connect to your current door bell wiring with two screw terminals on the rear. It does not come with wiring or chimes. It attaches to your home with two wood screws.
16 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 16-3/4″ tall and the rear plate measures 1-7/8″ wide by 6″ tall. The bolt tongue measures 3/4″ when activated, and is 5/8″ wide. The bolt comes with two different keepers, one used when the door is flush with it’s casing, and one used when the door is set deeper into its casing. It also comes with one stay used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).
Three and a Half Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.
Three Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.
Iron Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of iron and powder coated in a matte black finish. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into "dummy knobs" (call for price). This set does not come with any locking or latching device.
The back plates measure 2-3/8" x 7" at their widest points
The knobs measure 1-3/4" x 2-3/4" at their widest points and rise 2-3/4" from the surface of the door
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
Solid Brass Ball Bearing Hinges - ball finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
Solid Brass Knob and Lever Set with Rosettes. This set mimics screen door and small French door knob and lever sets found in New Orleans. The set comes with one knob, one lever, one circular rosette, one oval rosette, a shaft that connects the knob to the lever with set screws, and two set screws. This set will not work on predrilled doors, nor can it be made into "dummy knobs". It does not come with any latching or locking device.
The knob measures 1-3/4" in diameter and rises 2-1/8" from the surface of the door
The lever measures 3" long 7/8" in diameter at shank and rises 2-1/2" from the surface of the door
The round rosette measures 1-3/4" in diameter
The oval rosette measures 1-3/4" x 1-3/8"
28 Inch Iron Head Bolt is most often used on a double door application and secures the stationary door at the top, it is highly recommended for use with a foot bolt (or bottom bolt) to prevent warping. The bolt measures 28-1/2" tall and the rear plate measures 1-15/16" wide by 6" tall. The bolt tongue measures 7/8" when activated, and is 3/4" wide. The bolt comes with two different keepers, one used when the door is flush with it's casing, and one used when the door is set deeper into its casing. It also comes with two stays used to keep the arm from being pulled from the surface of the door. It is important to note that in order to operate the bolt properly it must only be pulled up or down, never forward away from the surface of the door (this action would put stress on the weld that attaches the arm to the bolt).
Embossed Ball Top Hinges 4-1/4" x 4-7/8" are sold in pairs of two (one hinge shown in images). These are made of cast iron and painted semi-gloss black. The pin is removable for ease of hanging. There is embossing on the face of the hinge, the spine of the hinge, and on both finials. The pattern of the embossing is in a floral Victorian style.
Solid Brass Beaded Oval Knobs and Plates Set. This set mimics what would be found in some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be made into “dummy knobs” (call for price). This set does not come with any locking or latching device.
The back plates measure 2-1/4″ x 7″ at their widest points
The knobs measure 1-5/8″ x 2-1/2″ at their widest points and rise 2-1/2″ from the surface of the door
Solid Brass Gothic Knobs and Plates Set. This set mimics what would be found in Arts and Crafts, Tudor, Gothic, and Spanish Revival homes . Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can not be made into “dummy knobs”. This set does not come with any locking or latching device.
The back plates measure 1-5/8″ x 6-1/8″ at their widest points
The knobs measure 2″ in diameter and rise 2-5/8″ from the surface of the door
Solid Brass Amarat Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the "Amarat" pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into "dummy knobs". They do not come with any latch or locking device.
The plates measure 1-1/2" x 5-1/2"
The Knobs are 2-1/4" in diameter
The set projects 2-1/4" from the face of the door
Solid Brass Magnolia Door Knobs and Plates Set. Originally patented in 1909 by Penn Hardware, the “Magnolia” pattern was used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-5/8″ x 5-3/8″
The Knobs are 2-3/16″ in diameter
The set projects 2-1/2″ from the face of the door
Solid Brass Amarat Door Knobs and Plates Set. Designed by Mr. Peter A. Ricca himself to mimic an Eastlake door set. We have casted this set out of solid brass. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-3/4″ x 5-11/16″
The Knobs are 2-1/4″ in diameter
The set projects 2-1/2″ from the face of the door
Solid Brass Broken Leaf Door Knobs and Plates Set. Originally patented in 1887 by Lockwood Manufacturing Company, the “Broken Leaf” pattern was widely used at the end of the Victorian era, a style that has come to be known as Eastlake. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will not work for predrilled doors, nor can it be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 1-1/2″ x 5-5/16″
The Knobs are 2-1/4″ in diameter
The set projects 2-1/2″ from the face of the door
Four Inch Steeple Top Embossed Brass Hinges are sold in pairs of two. They feature a removable pin for ease of installation.
Small Victorian Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 8″ tall. The front measurement is 17-3/4″ wide and 12-1/4″ tall. The vent recesses into the foundation 3-1/2″ deep.
Small Rectangular Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 13″ wide and 7-7/8″ tall. The front measurement is 15-1/8″ wide and 10-1/8″ tall. The vent recesses into the foundation 3″ deep.
Small Plain Oval Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 12″ wide and 6-1/2″ tall. The front measurement is 15-7/8″ wide and 10-1/4″ tall. The vent recesses into the foundation 3″ deep.
Flat Victorian Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally are screwed to the foundation. The measurement is 21-3/8″ wide and 13-5/8″ tall. The vent does not recess.
Solid Brass St. Julian Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “St. Julian” pattern was widely used at the end of the Victorian era, as well as the beginning of the Craftsman period. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two slip on knobs, a shaft that connects the two knobs by set screws, and two set screws. This set will work for predrilled doors, however it can not be made into “dummy knobs”. They do not come with any latch or locking device.
The plates measure 2-1/2″ x 8-1/2″
The Knobs are 2-3/8″ in diameter
The set projects 2-1/2″ from the face of the door
Solid Brass Rose Knobs and Rosettes Set. This set mimics the Victorian decadence and pattern. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two rosettes, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below for all of your other needs.
The rosettes measure 2-3/8″ in diameter
The knobs measure 2-3/8″ in diameter and rise 2-3/4″ from the surface of the door
15" tall
12" in diameter
The urn is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the urn painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
Solid Brass Concentric Knobs and Plates Set. This set is modeled after concentric patterns from the late 1800's through the 1930's. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, but can be customized below to suit your needs.
The back plates measure 2-1/2″ x 7-9/16″ at their widest points
The knobs measure 2-1/4″ in diameter and rise 2-1/4″ from the surface of the door
Solid Brass Jerome Door Knobs and Plates Set. Originally patented in 1909 by Russell and Erwin the “Jerome” pattern was used during much of the craftsman era. We have interpreted the original design into a lovely set of solid cast brass hardware. The set is composed of two back plates, two screw on knobs, a shaft that connects the two knobs by set screws, and four set screws. This set will work for predrilled doors, it can be made into “dummy knobs” (call for price). They do not come with any latch or locking device.
The plates measure 2-1/2″ x 9-1/8″
The Knobs are 2-1/4″ in diameter
The set projects 3″ from the face of the door
Large Rectangular Foundation Vent is made of cast aluminum and sold unfinished. It can be primed and painted with exterior primer and paint. These are traditionally set into the foundation using cement as a binder. The rear measurement is 14-1/4" wide and 8-5/8" tall. The front measurement is 17-1/2" wide and 11-3/4" tall. The vent recesses into the foundation 3" deep.
