-
Medium Iron Fleur De Lis Pulls
Medium Iron Fleur De Lis Pull measures 5-3/8" long, 1-1/4" wide and 7/8" deep. The screw holes measure 3-1/2" center to center. They are painted black.
-
Out of stock
Indian Bonnett Roof Finial
Indian Bonnett roof finial made from cement and painted in a terracotta color. For Gabled roof. Please call for availability, we do not ship this item using UPS. Although we may have this tagged as sold out, we may have them in stock.
-
Out of stock
Rooster Comb Roof Finial
Rooster Comb roof finial made from cement and painted in a terracotta color. For Gabled roof. Please call for availability, we do not ship this item using UPS. Although we may have this tagged as sold out, we may have them in stock.
-
Out of stock
Roman Roof Finial
Roman roof finial made from cement and painted in a terracotta color. For Gabled roof. Please call for availability, we do not ship this item using UPS. Although we may have this tagged as sold out, we may have them in stock.
-
Out of stock
Short New York Formal Bench
The Short New York Formal Bench measures 44″ wide at the front, 35″ wide at the rear, 15-1/2″ deep, with a 17" tall seat, and 34-1/2″ tall rear.
The bench is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the bench painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
-
Out of stock
Long New York Formal Bench
The Long New York Formal Bench measures 60″ wide at the front, 50-1/2″ wide at the rear, 15-1/2″ deep, with a 17" tall seat, and 36″ tall rear.
The bench is made of cast aluminum, and is sold without a finish. The cast aluminum is silver in color. We suggest you paint it. The image shows the bench painted black but is not indicative of how it is sold.
We cannot ship this item using UPS, it would have to be delivered using a freight company, please call us for a shipping quote 504 488 5524.
-
Iron Victorian Pull Handle
The iron Victorian pull handle is made of cast iron and powder coated in a black finish. The back plate measures 18" x 3-1/2" at the tallest and widest points (3" wide at the narrowest point). the pull handle itself is 13-1/2" from tip of finial to tip of finial and projects 3-3/8" from the surface of the door. This pull would be impressive on a set of barn doors, on a double door, or used as a hand towel bar in your kitchen or bath.
-
Rustic Iron Pull Handle
The rustic iron pull handle is made from cast iron and powder coated in a black finish. It measures 9-5/16" x 1-1/2" at the rear and projects 2-1/2" from the surface of the door. It has an offset handle - going slightly to the left or right of the back plates- depending how you mount it. It can be used vertically or horizontally. We have even had clients use these as hand towel bars in their bathrooms and kitchens.
-
Out of stock
9 Light Marginal Doors
9 Light marginal doors- Available in both 6'8" and 8'0" heights. These doors are made of Mahogany and feature beveled, tempered glass. These are sold as slabs only and do not come prehung. It is important to note that if you are ordering pairs of sidelights - each listing is for a single slab, so you will need to order two slabs to make a pair.
The following sizes are available:
36" x 80" x 1-3/4" (Currently out of stock)
32" x 80" x 1-3/4"
30" x 80" x 1-3/4"
18" x 80" x 1-3/4" (6 light sidelight- see photos)
14" x 80" x 1-3/4" (3 light sidelight- see photos)
36" x 96" x 1-3/4"
32" x 96" x 1-3/4"
18" x 96" x 1-3/4" (6 light sidelight)
36" door with 14" sidelights
30" doors with 18" sidelights
36" x 80" door
-
Out of stock
The Baton Rouge Line
The Baton Rouge Line Door combines clean lines with classic style. These doors are made from Mahogany with engineered stiles. We manufacture them with two different glass lengths in multiple sizes. The glass is clear, flat, and tempered; a single sheet of 1/4 inch glass. These are sold in a 7' height but can be trimmed to 78" tall in height if desired. These doors are sold as slabs only- no jambs included, and are unfinished and un- bored. Please call to get a freight quote before ordering, the price below does not include shipping.
The first glass length is 48" with a shorter panel.
These are available in the following sizes:
36" x 84" x 1-3/4"
34" x 84" x 1-3/4"
32" x 84" x 1-3/4"
30" x 84" x 1-3/4"
18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients
The second glass length is 36" with a panel almost halfway up the door
These are available in the following sizes: 36" x 84" x 1-3/4"
34" x 84" x 1-3/4"
18" x 84" x 1-3/4" - this is a side light but has been used as a French door by a few of our clients
-
Out of stock
Classic Cottage Door Line
There are two distinct styles in our classic cottage door line: The Eastlake and The Diamond. Each style is manufactured in Mahogany with engineered stiles and rails. The 84" tall doors can be trimmed in height to 79". The 90" doors can be trimmed in height to 87". They are available in the following sizes.
The Eastlake
36" x 84" x 1-3/4"
34" x 84" x 1-3/4"
available with clear or glue chip glassThe Diamond
36" x 90" x 1-3/4"
34" x 90" x 1-3/4"
available with clear or glue chip glass -
Out of stock
New Mahogany French Doors
Ricca’s new Mahogany French doors come in four sizes-
18” x 84” x 1-3/4” (for a 3’-0” x 7’0” opening)
18” x 96” x 1-3/4” ( for a 3’-0” x 8’-0” opening)
24” x 84” x 1-3/4” (for a 4’-0” x 7’-0” opening)
24” x 96” x 1-3/4” (for a 4’-0” x 8’-0” opening)
We offer them with solid mahogany stiles and rails or engineered stiles and rails. They are only available with clear, flat glass. Jambs and astrigals are not included. We offer 7’ T astrigals for $60.00 and 8’ T astrigals for $75.00. Please call 504 488 5524 for availability of the T astrigals. These are too large to ship with UPS but if you call the number above we would be happy to provide you with a freight quote.
-
Out of stock
Market Street Post Mount Lantern 18" Tall
The Market Street post mount lantern 18" tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP)
Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is bronze with the electric one light function)
-
Out of stock
Church Street Post Mount Lantern
The Church Street post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two or three burners. (Gas fixtures are for natural gas service only, please call for LP)
Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric three light cluster function) -
Out of stock
Columbia Wall Mount Lantern
The Columbia wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric single light function)
-
Out of stock
Old Village Wall Mount Lantern 24" Tall
The Old Village wall mount lantern 24″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light cluster function)
-
Out of stock
Old Village Wall Mount Lantern 17.5" Tall
The Old Village wall mount lantern 17.5" tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is black with the electric two light cluster function)
-
Out of stock
Saint Phillip Street Wall Mount Lantern
The Saint Phillip Street wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
-
Out of stock
Saint Phillip Street Post Mount Lantern
The Saint Phillip Street post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
-
Out of stock
Ashley Yolk Mount Lantern
The Ashley yolk mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP)
Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function) -
Out of stock
Ashley Post Mount Lantern
The Ashley post mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric two light function)
-
Out of stock
Ashley Hanging Lantern
The Ashley hanging lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights
Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric single light function) -
Out of stock
Ashley Wall Mount Lantern
The Ashley wall mount lantern is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, or two lights; or gas with one or two burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric single light function)
-
Out of stock
Charleston Yolk Mount Lantern 41" Tall
The Charleston yolk mount lantern 41″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Solid copper top Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is in Bronze with the electric three light cluster function)
-
Out of stock
Charleston Wall Mount Lantern 23" Tall
The Charleston wall mount lantern 23″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is copper with the electric three light cluster function)
-
Out of stock
Charleston Hanging Lantern 23" Tall
The Charleston hanging lantern 23″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights Other options: Solid copper top Please call 504 488 5524 to order as we do not stock these items. (the lantern shown in the photo is in the bronze with a three light cluster and solid top)
-
Out of stock
Charleston Post Mount Lantern 26" Tall
The Charleston post mount lantern 26″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two, or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is in copper with the gas single burner function)
-
Out of stock
Charleston Yolk Mount Lantern 38" Tall
The Charleston yolk mount lantern 38″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Solid copper top Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is in Bronze with the electric three light cluster function and solid top)
-
Out of stock
Charleston Wall Mount Lantern 20" Tall
The Charleston wall mount lantern 20″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights; or gas with one, two or three burners. (Gas fixtures are for natural gas service only, please call for LP) Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures). Please call 504 488 5524 to order as we do not stock these items. (the lantern shown is in bronze with the electric single light function and glass chimney globe)
-
Out of stock
Charleston Hanging Lantern 20″ Tall
The Charleston hanging lantern 20″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available: Finish: Copper (standard), Bronze, or Black Function: Electric with one, two, or three lights Other options: Solid copper top Please call 504 488 5524 to order as we do not stock these items. (the lantern shown in the photo is in the copper with a three light cluster)
-
Out of stock
Charleston Post Mount Lantern 23″ Tall
The Charleston post mount lantern 23″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available:
Finish: Copper (standard), Bronze, or Black
Function: Electric with one, two, or three lights; or gas with one, two, or three burners.
(Gas fixtures are for natural gas service only, please call for LP)
Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures).
Please call 504 488 5524 to order as we do not stock these items.
(the lantern shown is in copper with the electric three light cluster function)
-
Out of stock
Charleston Yolk Mount Lantern 33.5" Tall
The Charleston yolk mount lantern 33.5″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available:
Finish: Copper (standard), Bronze, or Black
Function: Electric with one, two, or three lights; or gas with one, two or three burners.
(Gas fixtures are for natural gas service only, please call for LP)
Other options: Solid copper top
Please call 504 488 5524 to order as we do not stock these items.
(the lantern shown is in copper with the electric two light cluster function)
-
Out of stock
Charleston Wall Mount Lantern 15.5" Tall
The Charleston wall mount lantern 15.5″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available:
Finish: Copper (standard), Bronze, or Black
Function: Electric with one, two, or three lights; or gas with one, two or three burners.
(Gas fixtures are for natural gas service only, please call for LP)
Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures).
Please call 504 488 5524 to order as we do not stock these items.
(the lantern shown is in bronze with the electric single light function)
-
Out of stock
Charleston Hanging Lantern 16.5" Tall
The Charleston hanging lantern 16.5″ tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available:
Finish: Copper (standard), Bronze, or Black
Function: Electric with one, two, or three lights
Other options: Solid copper top
Please call 504 488 5524 to order as we do not stock these items.
(the lantern shown in the photo is in the copper with a two light cluster)
-
Out of stock
Charleston Post Mount Lantern 18.5" Tall
The Charleston post mount lantern 18.5" tall is hand made in the united states. Made of solid copper with brass fittings, these lanterns are handmade items and can take up to five weeks for delivery. Several options are available:
Finish: Copper (standard), Bronze, or Black
Function: Electric with one, two, or three lights; or gas with one, two or three burners.
(Gas fixtures are for natural gas service only, please call for LP)
Other options: Solid copper top or Glass chimney globe (only available on single light electric fixtures).
Please call 504 488 5524 to order as we do not stock these items.
(the lantern shown is in copper with the electric single light function)
-
Out of stock
New Simple Bracket
This new simple bracket measures 23″ Long x 16″ tall x 4″ deep. It was created from antique, reclaimed cypress here in the shop. Please call 504 488 5524 for availability as we do not always have it in stock. These cannot be shipped using UPS but we can get you a commercial freight quote when you call in.
-
Out of stock
New Pecky Cypress Bracket
This new Pecky Cypress bracket measures 31″ Long x 19″ tall x 3-3/4″ deep. It was created from antique, reclaimed cypress and Pecky Cypress here in the shop. Please call 504 488 5524 for availability as we do not always have it in stock. These cannot be shipped using UPS but we can get you a commercial freight quote when you call in.
-
Out of stock
New Bracket with Rosettes
This new bracket with rosettes measures 23″ Long x 17″ tall x 4″ deep. It was created from antique, reclaimed cypress here in the shop. Please call 504 488 5524 for availability as we do not always have it in stock. These cannot be shipped using UPS but we can get you a commercial freight quote when you call in.
-
Out of stock
New Bracket with Large Finial
This new bracket with large finial measures 33" Long x 21" tall x 4" deep. It was created from antique, reclaimed cypress here in shop. Please call 504 488 5524 for availability as we do not always have it in stock. These cannot be shipped using UPS but we can get you a commercial freight quote when you call in.
-
Out of stock
Stained Glass Pocket Doors- SOLD
This amazing pair of Stained Glass Pocket Doors measures a massive 10 feet wide by 11 feet tall (image shows one door). The glass features German bottle bottom pieces, with a very large one in the center at the top, and two beautiful shades of blue textured glass. There are three panels at the bottom of each door, each panel is raised with an applied molding surrounding them. These are massive. The photos do not do them justice in any way. They could be used as standard swinging doors, in either an interior or exterior application. Please call 504 488 5524 if you are interested in getting a shipping quote.
-
Out of stock
T Panel Interior Doors
T Panel Interior Doors come in three varieties:
Flat Panel with Shaker Profile Doors- Traditionally have flat panels (either plywood or cypress) with a square profile on the stiles and rails.
Flat T Panel With Shaker Profile
Flat Panel with Shaped Profile Doors- These are the most common of the T panel doors, panels are flat (either plywood or cypress) with a shaped profile on the stiles and rails.
Raised Panel Doors- The least common of the T panel styles, has cypress raised panels.
Raised T Panel
Antique T panel doors come in widths from 28″ wide to 34″ wide, although we do have some others in odd widths. The height starts around 76″, and up to 84″ normally we do have some in odd heights. The thickness ranges from 1″ to 1-1/2″.
Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.
-
Out of stock
6 Arm Italian Brass and Crystal Chandelier
This 6 Arm Italian Brass and Crystal Chandelier is rewired and ready to hang. It features six brass arms, with genuine Beeswax candle covers, wired for chandelier base lamps (no greater than 40 watts each). It was probably manufactured between 1920 and 1935. It has crystal tear drops which refract the light perfectly. There is a crystal spear at the center of the fixture as well as a crystal ball at the bottom. This chandelier has brass acanthus leaves and scrolls.
The measurements are as follows:
30″ wide
33″ tall body with crystal
43″ of chain and canopy
The bottom of this chandelier would hang 76″ from the ceiling, perfect for 12′ or 14′ ceilings.
This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!
-
Out of stock
5 Panel Interior Doors
5 Panel Interior Doors come in two main varieties:
Raised Panel- The panels are raised on both sides, and are mainly solid cypress doors.
Raised 5 Panel Door
Flat Panel- The panels are flat with either a shaker stile or a stepped profile stile. These doors can be cypress, but they are more common in fir with plywood panels.
Flat 5 Panel
Five panel doors typically come in widths from 26″ wide to 34″ wide, although we do have some others in odd widths. The heights typically start around 79″ and go to 84″, although we do have some in odd heights. They range in thickness from 1″ to 1-3/4″.
Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.
-
Out of stock
4 Panel Interior Doors
4 panel interior doors come in three varieties:
Queen Anne Bead doors- Traditionally have raised panels with a beaded route done vertically through the center of each panel.
Raised Panel Doors- The most common of the four panel styles, has four raised panels.
Raised 4 Panel Door
Flat Panel With Applied Molding- The oldest of the four panel styles, features four flat panels with molding applied to both sides of the door framing the panels.
Applied Molding 4 Panel Door
Four panel doors typically come in widths from 30" wide to 34" wide, although we do have some others in odd widths. The heights typically start around 79" and go to 90", although we do have some in odd heights. They range in thickness from 1" to 1-1/2".
Most of our doors are made of cypress. They are antique, used doors and will have holes, blemishes and other imperfections. We do offer refurbishment at an additional cost that depends on what needs to be done to the specific door.
-
Out of stock
Spanish Cast Brass 6 arm Chandelier
This Spanish Cast Brass 6 arm Chandelier is rewired and ready to hang. It features six brass arms with crystal baubaches wired for standard base lamps (no greater than 40 watts each). It is marked at the top with the made in Spain logo. It was probably manufactured between 1950 and 1965. It has crystal tear drops which refract the light perfectly.
The measurements are as follows:
24″ wide
23″ tall body with crystal
39″ of chain and canopy
The bottom of this chandelier would hang 62″ from the ceiling, perfect for 11′ or 12' ceilings.
This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!
-
Out of stock
Deco Glass 3 Light Fixture
This Deco Glass 3 Light Fixture will take 3 standard base lamps (no greater than 40 watts each). The shade is a mixture of textured white opaque and clear fluted glass, and has a concentric pattern. The chain and canopy are chrome.
The measurements are as follows:
11″ wide
12″ tall body
24″ of chain and canopy
The bottom of this chandelier would hang 36″ from the ceiling, perfect for 8′ ceilings.
-
Out of stock
1920's Crystal 5 Arm Chandelier
This 1920's Crystal 5 Arm Chandelier has been cleaned and rewired and is ready to hang. It features Pendalogue crystals at the top and tear drop crystals hanging from the baubaches. There are five arms that take a standard base lamp (no greater than 40 watts each). The five shades are original to the fixture, one is cracked. You can choose to leave them on, or hang it without them.
The Measurements are as follows:
24" wide
24" tall body with crystal
13" of chain and canopy
The bottom of this chandelier would hang 37" from the ceiling, perfect for 8' ceilings.
This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!
-
Out of stock
Black Chandelier with Crystal Pendalogues
This vintage Black Chandelier with Crystal Pendalogues has been rewired and is ready to hang. It has six lights that take candelabra base lamps (maximum of 40 watts each). The Pendalogues are vintage and are in four sizes- 50mm, 70mm, 80mm and 105mm. There is nice fern and pineapple details on the body of this chandelier.
The measurements are as follows:
17" wide
22" body height with crystal
13" of chain and canopy
The bottom of the chandelier would hang 35" from the ceiling- perfect for 8' ceilings
This item is to large and delicate to ship using UPS, please call 504 488 5524 if you would like a commercial freight quote to get this item home!
-
Large Henry Lips Original Stained Glass
We have Three of these Large Henry Lips Original Stained Glass pieces. They are framed in reclaimed cypress and measure approximately 28" x 77" x 1-3/8" each. These are signed A Henry Lips 11-1-80 in the corner, please see supplemental image.
The Lips family has been in the stained glass business in New Orleans for many years. Multiple family members create beautiful pieces of art that hang in some of the most affluent homes in the south. Mr. Henry is still in business, handcrafting these beauties.
These two coordinate with two smaller pieces we have in a separate listing. There are nice complimentary blues and oranges as well as amber and a neutral opaque.
These Items are too large and fragile to ship using UPS therefore we ask you to call 504 488 5524 if you are interested in purchasing them so we may get you a freight quote with a commercial freight company.
-
Small Henry Lips Original Stained Glass
We have two of these Small Henry Lips Original Stained Glass pieces. They are framed in reclaimed cypress and measure approximately 28" x 51-3/4" x 1-3/8" each. These are signed A Henry Lips 11-1-80 in the corner, please see supplemental image.
The Lips family has been in the stained glass business in New Orleans for many years. Multiple family members create beautiful pieces of art that hang in some of the most affluent homes in the south. Mr. Henry is still in business, handcrafting these beauties.
These two coordinate with three larger pieces we have in a separate listing, and by no means are they small. There are nice complimentary blues and oranges as well as amber and a neutral opaque.
These Items are too large and fragile to ship using UPS therefore we ask you to call 504 488 5524 if you are interested in purchasing them so we may get you a freight quote with a commercial freight company.
-
Out of stock
Victorian style Stained Glass Window
Victorian style Stained Glass Window. This window measures 3' wide by 4' tall including the frame. It is framed in Mahogany. It includes Flemish glass, beveled glass, Kokomo glass (in several shades of blue, green, yellows, and oranges), textured glass (in amber and violet),and some ruby glass jewels. The caming is zinc. This piece has been reinforced on the rear of the piece. It is truly spectacular in person! This item is too fragile and large to ship using UPS, therefore we are not selling them directly through the website. Please call us at 504 488 5524 and we would be happy to get you a quote for commercial freight.
-
Out of stock
Four Panel Door in Mahogany
Four Panel Door in Mahogany. These doors come in 7' or 8' tall. The 8' doors can be trimmed to 7'5" tall. The 7' doors can be trimmed to 6'7" tall. The widths range from 18" wide to 36" wide in each height. The thickness of these doors is 1-3/8". These doors are sold as unfinished slabs, without bores or mortises. They do not come prehung or pre finished. They are stain grade, but can be painted if desired. The stiles of the doors are engineered mahogany to prevent warping and checking. There is a 1/4" Mahogany veneer on the stiles and rails, the panels are solid Mahogany. The images show the doors installed with a finish, they do not come pre finished. These items are too large to ship using UPS, therefore we do not sell them directly through the website. If you are interested in purchasing these please call us at 504 488 5524 and we would be happy to get you a quote for shipping through commercial freight line.
-
Embossed Kick Bolts
Embossed kick bolts- available in two sizes and two finishes
The embossed kick bolts in the brass finish are made from solid, cast brass. The embossed kick bolts in the powder coated black are made from cast iron. These embossed kick bolts are designed to go at the bottom of the stationary door, shutter, or window when there are pairs of doors, shutters, or windows. We highly recommend you use these with a chain bolt (or top bolt) to prevent warping of your door.
The small bolts have the following measurements:
The bolt body measures 1-7/8 ” wide and 5-1/16″ tall, the tongue sticks out 1/2″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
The large bolts have the following measurements:
The bolt body measures 2 ” wide and 7-1/16″ tall, the tongue sticks out 3/4″ from the body of the latch when activated. The bolt is designed to be operated with your foot, the large button at the top activates it and the small button on the face deactivates it. The bolt comes with two strike plates- one measuring 1-7/8″wide and 2-3/8″ deep, and one measuring 2″ wide and 7/8″ deep.
-
Out of stock
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
Solid Brass Ball Bearing Hinges - ball finial in 3-1/2" x 3-1/2"
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Currently available in 3-1/2" x 3-1/2". Features five knuckles with two ball bearings and three screw holes per side.
-
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
Solid Brass Ball Bearing Hinges - steeple finial in multiple sizes
These hinges are made from solid brass, polished to a high shine and lacquered to prevent immediate tarnishing. The ball bearing helps to prevent the solid brass hinge from wearing down when used on heavier doors. They are sold as pairs (two hinges per package) and come with screws.
Two sizes are available, 3-1/2" x 3-1/2" and 4"x 4". Both sizes feature five knuckles with two ball bearings. 3-1/2" hinges have three screw holes per side, while 4" hinges have four.
-
Plated steel hinges- several sizes and colors to choose from
Plated steel hinges- several sizes and colors to choose from.
These hinges are made from steel with plated finish in either polished brass, oil rubbed bronze, brushed nickel or polished nickel. They are sold two hinges per package. The following sizes are available:
3" x 3" in brass or bronze
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 1/2" in diameter. This size is good for door thicknesses up to 1-3/8" or larger windows and cabinet doors. They come with #9 x 1" Screws in the same finish.
3-1/2" x 3-1/2" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring three screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/8". They come with #10 x 1" Screws in the same finish.
4" x 4" in all finishes
This hinge is a 5 knuckle hinge with removable pin, featuring four screw holes per side of hinge. Ball finials measure 9/16" in diameter. This size is good for door thicknesses up to 1-3/4". They come with #12 x 1" Screws in the same finish.
-
Out of stock
Antique Stewart Iron Works Wrought Iron Gate
Antique Stewart Iron Works Wrought Iron Gate
This gate, manufactured in Cincinnati, Ohio by the Stewart Ironworks Company, measures 37" wide with the mounting hardware and primitive latch, or 31-1/2" wide as just the gate. It measures 52" tall at the center, and 42" tall at the sides. It needs a weld at the bottom right corner, the top finial is slightly bent, and may need some bondo work at the top left, but is otherwise in great shape for its age. There is a great makers plaque at the center, pictured in the gallery of images. The primitive latch is still functioning. The gate comes with the portion of the hinge that bolts to your fence post and the rod that attaches your gate to the hinge. The iron details on this gate are exquisite. Please call for a shipping quote if you are interested in this gate as we cannot ship it using UPS.
-
Out of stock
10 Arm Crystal Chandelier
This Czech Crystal (30% leaded) chandelier features 10 arms and is absolutely loaded with prisms. It dates back to the 1930's and was recently rebuilt and rewired. This one is a stunner! We cannot ship this product UPS , please call for a freight quote!
-
Out of stock
3 Foot Gate
Our 3 foot gate is made from flat steel, hollow steel, and cast iron components. The gate comes with two hollow steel posts, with lift off style hinges included. With each gate you get to choose your finial style- either the spear finial (which matches our loop and spear fencing), or the Fleur de Lis finial. An image of each finial can be seen in the image gallery above. We do not always have these in stock, but we would be happy to order either style for you. If you are coordinating these with our loop and spear fencing, the 3 foot gate looks best with the 2 foot or the 3 foot tall fencing.
The measurements are as follows (measurements may vary slightly as this is a handmade product)
Gate width without hinges: 36"
Gate height at center- including finials: 36-1/4"
Gate height at sides: 30-1/4"
Post dimensions: 2" x 2"
MINIMUM Opening measurement required for installation: 41-1/2"
-
Out of stock
Garden District Summerfront
Garden District summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick (or with this style, the face of a cast iron or stone mantle), and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)
Outer width 26-3/8"
Outer height 29-5/8" at center
Inner width 18-1/4"
Inner height 25-3/4" at center
-
Out of stock
Number 16 Summerfront
Number 16 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
The measurements are as follows: (measurements are approximate as items are cast and can vary slightly)
Outer width 23-1/4"
Outer height 27"
Inner width 16"
Inner height at center 23-1/2"
-
Out of stock
Number 14 Summerfront
Number 14 summerfront comes in two pieces, the frame and the insert. These were used at the opening of the fireplace; with the frame being permanently attached to the face of the brick, and the insert balanced within the frame. They were made for when the fireplace was not in use, where the insert would be in place to not only make the opening look more attractive, but to prevent critters from getting into the home. These are newly made from 100% recycled Aluminum.
-
Out of stock
Custom Entry DoorThis custom entry door measures 36" x 96" x 1-3/4" and is made of salvaged cypress lumber from New Orleans. The door does not contain glass, but we would be happy to get you a quote for glass installation. This door was made to replicate the Creole style cottage doors that are present throughout New Orleans. Not the correct size for you? Call us with your size and we would be happy to get you a quote for a different size.
-
Out of stock
Custom Bathroom VanityThis custom bathroom vanity was created using antique cypress lumber salvaged from homes in New Orleans. Not too often do you find a cabinet that is ONLY made of solid wood (without any plywood or composites). Quality in craftsmanship and materials are our goals whenever we produce anything for your home. Please give us a call today to discuss any custom items you may need.
-
Out of stock
Custom Door with Stained GlassThis door was created for a client who wanted a unique door for his pantry. The door is made from an antique stained glass window and Pecky Cypress pulled from a bayou in southeast Louisiana. The door was designed so that the stained glass window could be opened. We have tons of antique and vintage stained glass panels in stock and would be happy to sit down and discuss a custom door for you.
-
Out of stock
Custom Gable Window UnitThis custom unit includes sash, jamb, exterior casing with top drip ledge, shutters, and Clarke Tip shutter hinges. The unit is completely made of antique cypress lumber salvaged from southeast Louisiana (with the exception of the cast iron hinges of course). The jamb measures 26-3/8" x 34-1/8" x 3-1/2". No glass is included, but we would be happy to price some glass installed for you.
-
Out of stock
Custom Modern Door To Match AnotherYes, sometimes we do carry modern style doors! In this case it was a one of a kind entry door with mid century styling. The dilemma: The client interested in the door needed a pair of doors. We accommodated her needs by creating a second door out of cypress to match the first. In mast cases we can replicate items as closely as possible. We do not like saying no very much!
-
Out of stock
Custom Victorian Cottage DoorSometimes clients come in and need to match an existing item as exactly as possible. This client's front door was destroyed when a contractor had the paint removed improperly. Being that the house sat on one of the historic, Oak tree lined main streets here in New Orleans; and combined with the fact that the door was an odd size; this door could not be replaced with something off of the shelf. We created this beauty using the client's original Leaded Glass insert- which had to be completely rebuilt- Brazilian Mahogany, and antique cypress for the applique. This door was not inexpensive, but we can work within your budget in most cases and create something unique for your property. Please contact us for any of your replacement needs.
-
Out of stock
Custom Hall Tree
This custom Hall Tree was created using an old door, some mirror, antique hardware and Pecky Cypress. It has since been sold, but another similar one can be created for you. Please call the shop or come in and we would be happy to discuss creating a custom item for your home.
