This custom wainscoting was created using horizontal paneled doors, baseboard, and some cove molding, all in cypress. This went perfectly with the vintage game room theme of this room. The floors in this image were also made by us for this room out of antique heart pine floor joists. Like this look? Contact Roland at Ricca's for more information.
This custom media cabinet was created using reclaimed cypress boards, as well as cypress casement windows and cypress shutters. The client was in need of a media cabinet that would provide ventilation for his cable box, video game consoles, and blue ray player; while providing areas to store his DVD's and games. Like what you see? Contact Jim at Ricca's for a quote!
This console table was created using upright board that had slight termite damage from it's many years of use as the inner walls of a home Uptown. The client wanted something for her hallway that would also double as storage for her larger books. Love what you see? Contact Jim at Ricca's for a quote!
Measures 23-3/4" wide and 24-1/2" tall
One available priced at $395.00
This vintage rose textured and stained glass panel is completely in tact
Craftsman Textured and Stained Glass PanelMeasures 20-3/8" wide 27-7/8" Tall
One available priced at $350.00'
In this Craftsman textured and stained glass panel two of the textured glass pieces are cracked
this craftsman stained glass panel measures 20-1/4" wide 32-1/4" tall with all opaque glass
One Available priced at $450.00
Has one damaged piece on the left side second one down
Antique Spade Stained Glass Panel28" wide x 29-1/4" tall with all opaque glass
Two available priced at $450.00 each
Simple Brass Sconce with Original Candle Covers
Rustic Iron Sconce
Solid Brass Exterior Beaded Oval Knobs and Plates Set. This set mimics what would be found on some of the Creole homes in and around New Orleans. Cast out of solid brass and polished to a mirror finish, lacquered to prevent immediate tarnishing. It translates nicely when modernizing and updating an older home while trying to maintain the small details that make an older home so appealing. The set comes with two back plates, two knobs, a shaft that connects the two knobs with set screws, and two set screws. These will not work with predrilled doors, and can not be made into “dummy knobs”. This set does not come with any locking or latching device.
The back plates measure 2-7/8″ x 9-3/4″ at their widest points
The knobs measure 2-1/4″ in diameter and rise 2-3/4″ from the surface of the door
15 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.
The exact measurements of the hinge itself are 15-1/4" long, 1-1/2" wide at widest point, tapers to 3/4" at the end.
The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.
12 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.
The exact measurements of the hinge itself are 12-1/2" long, 1-1/2" wide at widest point, tapers to 3/4" at the end.
The pintal measures 3-3/8" tall, 1-1/2" wide, and projects 1" from the back of the plate to the center of the pintal itself.
8 Inch Steel Strap Hinge includes hinge and pintal. These heavy steel hinges have no offset, but can be bent to accommodate most offsets. We suggest priming and painting these before installation. You may use these on the left or right shutter. This product can be installed using a drill.
The exact measurements of the hinge itself are 8" long, 1-3/4" wide at widest point, tapers to 1/2" at the end.
The pintal measures 4-3/4" tall, 1-3/8" wide, and projects 1" from the back of the plate to the center of the pintal itself.
17 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.
Hook length from center of hook to center of hole that attaches hook to the back plate- 16″
Overall hook length- 17″
Back plate size- 1-1/2″ x 3-1/4″ (1-3/8″ deep)
Eye size- 1-1/2″ x 3-1/4″ (3/4″ deep)
15 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.
Hook length from center of hook to center of hole that attaches hook to the back plate- 14-1/2″
Overall hook length- 15-1/2″
Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)
Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)
We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.
12 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.
Hook length from center of hook to center of hole that attaches hook to the back plate- 11-1/4″
Overall hook length- 12″
Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)
Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)
We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.
8 Inch Steel Hook and Eye. Contains one hook and one eye. All components are made of steel and left unfinished.
Hook length from center of hook to center of hole that attaches hook to the back plate- 7″
Overall hook length- 7-3/4″
Back plate size- 1-1/2″ x 3-3/8″ (1-1/4″ deep)
Eye size- 1-1/2″ x 3-3/8″ (3/4″ deep)
We recommend you prime and paint these before installation. They do not come with screws. It is ok to use a drill when installing this product.
